Bambu Lab P1P
Bambu Lab P1P against 877 PLA products: 587 fit, 104 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 186 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Amolen Basic Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Basic Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Conductive PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Crystal Transparent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Dual Color Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Dual Color Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Galaxy Sparkle Shiny Galaxy Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Amolen High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Marble PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Amolen PLA Metal | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Quad Color Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Rainbow Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen S-Series Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Shiny Glitter Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Shiny Gradient Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Silk GF PLA | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Amolen Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Temperature Color Change PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Transparent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Triple Color Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Triple Color Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen UV Color Change PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Wood PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic High-Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| Anycubic PLA Marble | — | Nozzle temperature is not in our current sources. | |
| Anycubic PLA Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic PLA Metal | — | Nozzle temperature is not in our current sources. | |
| Anycubic PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Anycubic PLA Silk Dual-Tricolor | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic PLA Special | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Aero | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Basic Gradient | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Galaxy | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Glow | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Bambu Lab PLA Lite | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Marble | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Metal | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Pure | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Silk Dual Color | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Silk Multi-Color | — | Nozzle temperature is not in our current sources. | |
| Bambu Lab PLA Silk+ | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Sparkle | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Tough+ | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Translucent | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Wood | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Bambu Lab Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb Economy PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb LW-HT PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb PHA PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb r-Semi PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb Semi PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb StoneFill PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality CR-PLA Carbon | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Creality Ender Fast PLA | — | Nozzle temperature is not in our current sources. | |
| Creality Hyper Luminous PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Hyper PLA | — | Nozzle temperature is not in our current sources. | |
| Creality Hyper PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Creality Hyper Rainbow PLA | — | Nozzle temperature is not in our current sources. | |
| Creality PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Creality PLA CR-Wood | — | Nozzle temperature is not in our current sources. | |
| Creality Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Soleyin Ultra PLA | — | Bed temperature is not in our current sources. | |
| ELEGOO Galaxy PLA | — | Nozzle temperature is not in our current sources. | |
| ELEGOO PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Glow | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| ELEGOO PLA Marble | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA MATTE | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Metallic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA PRO | — | Nozzle temperature is not in our current sources. | |
| ELEGOO PLA Sparkle | — | Nozzle temperature is not in our current sources. | |
| ELEGOO PLA Wood | — | Nozzle temperature is not in our current sources. | |
| ELEGOO PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| ELEGOO Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone PLA Burnt Titanium | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Burnt Titanium Dual-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Burnt Titanium Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Burnt Titanium Triple Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Light Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Luminous | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Marble | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte Dual-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte Gradient | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte High Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte High Speed Gradient Multi-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte High Speed Rock Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte High Speed Triple-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Metallic | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk High-Speed Dual-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk High-Speed Quadruple | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk High-Speed Triple-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Ultra Silk | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Wood | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D Dark Twinkling PLA Magic | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D Mystic Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D Peak PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| eSUN 3D PLA-Chameleon | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-HS | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Lite | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Luminous | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Luminous Rainbow | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-LW | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-Marble | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Metal | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Silk Candy | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Silk Magic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Silk Metal | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Silk Rainbow | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-ST | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Stars | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-Wood | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D UV Change PLA UV Color Change | — | Nozzle temperature is not in our current sources. | |
| extrudr Basic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr BioFusion PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr BioFusion Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr Flax PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr GreenTEC Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr GreenTEC PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr Pearl PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr PLA NX2 Matt | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr Wood PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fillamentum PLA Crystal Clear | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fillamentum PLA Extrafill | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Hatchbox Metallic Finish PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox PLA Basic | — | Nozzle temperature is not in our current sources. | |
| Hatchbox PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Hatchbox PLA Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox PLA Max | — | Nozzle temperature is not in our current sources. | |
| Hatchbox PLA Metal | — | Nozzle temperature is not in our current sources. | |
| Hatchbox PLA Pro | — | Nozzle temperature is not in our current sources. | |
| Hatchbox Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox Transparent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox UV Color Changing PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox Wood PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland Galaxy PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland PLA Basic | — | Nozzle temperature is not in our current sources. | |
| Inland PLA Chameleon | — | Nozzle temperature is not in our current sources. | |
| Inland Pla Glitter Rainbow | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland PLA Matte | — | Nozzle temperature is not in our current sources. | |
| Inland PLA Mystic Silk | — | Nozzle temperature is not in our current sources. | |
| Inland Pla Silk Rainbow | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| JAYO High Speed Matte PLA | — | Nozzle temperature is not in our current sources. | |
| JAYO Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| JAYO PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| JAYO Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Kingroon High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Kingroon Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Overture High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Air | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Overture PLA Cream | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Easy | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Easy Glow | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Overture PLA Professional | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Refill | — | Nozzle temperature is not in our current sources. | |
| Overture PLA Rock | — | Nozzle temperature is not in our current sources. | |
| Overture PLA Super | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Turbo Rapid | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Shimmer PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Creator Special Edition PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Draft PLA | — | Nozzle temperature is not in our current sources. | |
| Polymaker Dual Panchroma Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker For Production Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Polymaker Gradient Panchroma PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker HT PLA PRO | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker HT-PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker HT-PLA-GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Polymaker LW PolyLite PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Metallic PolyLite PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Metallic Polylite Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Muted Panchroma Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Neon Panchroma PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Panchroma Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Polymaker Panchroma PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Panchroma Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PLA CF | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Polymaker PLA PolyCast | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Polymaker Polymaker PLA Pro | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PolyMax PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polysonic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Satin Panchroma PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Wood PLA | — | Nozzle temperature is not in our current sources. | |
| Protopasta Basic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Conductive PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Fiber HT Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Fluorescent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Glitter PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Protopasta High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Iron Metal Composite PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Marble PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Metal Composite PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Metallic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Multicolor PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Nebula PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Opaque PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Pearl PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Protopasta PLA Green Glow-in-the-Dark | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Protopasta Recycled PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Satin PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Stainless Steel Metal Composite PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Static Dissipative Carbon Fiber PLA | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Protopasta Static Dissipative PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Steel Metal Composite PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Still Colorful Recycled PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Thermochromic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Translucent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament Blend Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament Mystic Premium PLA | — | Nozzle temperature is not in our current sources. | |
| Prusament PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament PLA Recycled | — | Nozzle temperature is not in our current sources. | |
| Prusament PLA Woodfill | — | Nozzle temperature is not in our current sources. | |
| Prusament rPLA | — | Nozzle temperature is not in our current sources. | |
| SUNLU APLA | — | Nozzle temperature is not in our current sources. | |
| SUNLU Fluorescent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| SUNLU High Speed Matte PLA | — | Nozzle temperature is not in our current sources. | |
| SUNLU High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU High Speed PLA Marble | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU PLA Carbon Fiber | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SUNLU PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| SUNLU PLA Classic | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Glow In The Dark | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| SUNLU PLA Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU PLA Matte Dual-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Rainbow | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU PLA Transparent Rainbow | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Twinkling | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Wood | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA-Meta | — | Nozzle temperature is not in our current sources. | |
| SUNLU Real Wood Fiber PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Silk 2.0 | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Temperature Color Change PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Transparent Clear PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Upgrade PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 123-3D 123-3D Filament PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 22 Network Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| 22 Network Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 22 Network PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 22 Network Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Prima Basic Recycle PLA | — | Nozzle temperature is not in our current sources. | |
| 3D Printing Canada Budget PLA | — | Nozzle temperature is not in our current sources. | |
| 3DE Premium | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DE Premium Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Marble | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Translucent | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Wood | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DFOX PLA REFILL | — | Nozzle temperature is not in our current sources. | |
| 3DHoJor PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DHoJor PLA Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DHoJor Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE eco Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| 3DJAKE eco Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE eco PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE eco Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| 3DJAKE magic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE mystery PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DO PLA | — | Nozzle temperature is not in our current sources. | |
| 3DPower Basic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Dual Color Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower HT 150 PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Hyper Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Marble PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Pastel PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Select PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech EcoMax PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech Economy PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| 3DXTech PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PLA 3DXStat ESD | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Aceaddity Marble PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Silk Magic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Wood PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North E PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Add-North High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North HT-PLA Pro Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Matte High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Add-North PLA Economy | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PLA Matte Textura | — | Nozzle temperature is not in our current sources. | |
| Add-North PLA Premium Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PLA Textura Flare | — | Nozzle temperature is not in our current sources. | |
| Add-North PLA Wood | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North rPLA RE-ADD | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North X-PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North X-PLA High Speed | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA Chameleon | — | Nozzle temperature is not in our current sources. | |
| Alzament PLA Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| AmazonBasics Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia PLA Dolos Color Shifting | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia PLA Galactic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia PLA Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AmeLeis PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| American Filament Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| American Filament PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| American Filament Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Arianeplast Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Arianeplast PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Arianeplast PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Arianeplast Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Artillery Artillery Basic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART Flexible 89A PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Atomic Filament Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL L-EGO PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL Metallic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL PLA HT110 | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL Wood PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm Glitter PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm Matte HS PLA | — | Nozzle temperature is not in our current sources. | |
| AzureFilm PLA | — | Nozzle temperature is not in our current sources. | |
| AzureFilm PLA Original | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm PLA Prime | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm Silk PLA | — | Nozzle temperature is not in our current sources. | |
| AzureFilm Wood PLA | — | Nozzle temperature is not in our current sources. | |
| BIQU PLA GO | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Buddy3D PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D Dual Color Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D PLA Max | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| COEX 3D PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D PLA VO3D High Impact | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad PLA Mermaid (purple | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad PLA Mermaid Fast Change (purple | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad PLA Unicorn Fast Change (purple | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Copymaster PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dancyn 3D Prints PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dancyn 3D Prints PLA Metal Series | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Das Filament Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament PLA Toms3D | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Devil Design PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Df PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Digilab Eco PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Digilab PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| DuramiC 3D PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EasyPrint PLA | — | Nozzle temperature is not in our current sources. | |
| EconoFil Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| EconoFil Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EconoFil PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EconoFil Standard PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EconoFil Standard Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Ingeo 850 PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Ingeo 870 PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX Luminous High Speed Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| EPAX Matte High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Fluorescent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Iridescent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Metallic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Pearl PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Silver Glitter PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS UV Reactive Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Fiberlogy Easy PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Fibersilk Metallic Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy HD PLA | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy HS Clear High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Impact PLA | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PLA FiberSatin | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PLA FiberSilk | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy PLA FiberWood | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PLA Mineral | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy R PLA | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Refill Easy PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Refill R PLA | — | Nozzle temperature is not in our current sources. | |
| FiberThree F3 GF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FiberThree PLA GF | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FilaCube PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilaCube PLA Greenery | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentive PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Army Edition PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Crystal Clear PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Extrafill PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FilamentPM MarbleJet PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Pastel Edition PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Pearl PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Skin Edition PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Timberfill PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentree Blaster PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentree PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentree PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Filamentree Plus PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentworld Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentworld PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentworld Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filatech PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filkemp PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Gradient Rapid Chameleon PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| FLASHFORGE Rapid Chameleon PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Rapid Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FLASHFORGE Rapid PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Bulk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil e Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil ePLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil PLA - Glow in the Dark | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FormFutura EasyFil PLA - Glow in the Dark | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| FormFutura EasyWood | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Galaxy PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura High Gloss PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura High Precision PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura MetalFil PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Premium PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ReForm r PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura StoneFil PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Volcano Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Francofil PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech Luminous Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Geeetech Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Geeetech PLA Marble | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech PLA Wood | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GIANTARM Glow in the Dark PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| GIANTARM PLA Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Color Change PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Fluorescent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Glitter Sparkle PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Gizmo Dorks PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Thermochromic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hobby Lobby Candyblack/Silver | — | Bed temperature is not in our current sources. | |
| Hobby Lobby PLA | — | Bed temperature is not in our current sources. | |
| Hobby Lobby PLA Silk | — | Bed temperature is not in our current sources. | |
| IC3D Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IC3D PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-PLA | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| IEMAI PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IIID MAX PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Insignia PLA | — | Nozzle temperature is not in our current sources. | |
| Insignia Silk_PLA | — | Nozzle temperature is not in our current sources. | |
| Inslogic High Speed Marble PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic High Speed PLA Pro | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic Multicolor Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic PLA CF15 | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Inslogic PLA Pro | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic WoodFill PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSANMATE iSANMATE Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSANMATE iSANMATE violet | — | Nozzle temperature is not in our current sources. | |
| Jessie PLA Premium Elixir | — | Nozzle temperature is not in our current sources. | |
| Jessie Premium PLA | — | Nozzle temperature is not in our current sources. | |
| Jessie Premium PLA Glitter | — | Nozzle temperature is not in our current sources. | |
| KiwiFil PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PLA "Sparkly Green Ocean" | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PLA Rainbow "Sparkly Green Ocean" | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PLA Rainbow "Sparkly Purple Galaxy" | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PLA Rustic Rainbow | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| L3D PLA Basic | — | Nozzle temperature is not in our current sources. | |
| L3D PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Landu PLA Metal | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Landu PLA Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LayerWorks Solutions LayerWorks WORKS series | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LOCYFENS Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LOVOON Silk Magic Color | — | Bed temperature is not in our current sources. | |
| MarsWork PLA Basic | — | Nozzle temperature is not in our current sources. | |
| MarsWork PLA Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc Glitter Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc Performance PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| MatterHackers Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| MatterHackers PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| MatterHackers Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Mika3D Silk | — | Nozzle temperature is not in our current sources. | |
| Mosaic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nebula PLA Art Glitter | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Art Glowing | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Art Marble | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Art Mystic Green | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Art Thermo | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Premium | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Premium Silk | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Tech 607 | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Tech 609 HD | — | Nozzle temperature is not in our current sources. | |
| Nexaforge PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Numakers Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Numakers PETG HS | — | Nozzle temperature is not in our current sources. | |
| Numakers PLA Marble | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Numakers PLA Wood | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Numakers PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Numakers Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| OVV3D Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| OVV3D PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| OVV3D Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Panchroma Basic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Panchroma Celestial PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Dual Matte PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Dual Silk PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Dual Special PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Galaxy PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Panchroma Gradient Galaxy | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Panchroma Gradient Matte PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Gradient Satin PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Gradient Translucent PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Luminous PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Marble PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Panchroma Metallic PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Neon PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Panchroma Satin PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Starlight PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Temp Shift PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Translucent PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma UV Shift PLA | — | Nozzle temperature is not in our current sources. | |
| Paramount 3D Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D PLA Flex | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Patron EG Marble PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Patron EG Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Phrozen PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyLite CosPLA Version A | — | Nozzle temperature is not in our current sources. | |
| PolyLite CosPLA Version B | — | Nozzle temperature is not in our current sources. | |
| PolyLite LW-PLA | — | Nozzle temperature is not in our current sources. | |
| PolyLite Metallic PLA Pro | — | Nozzle temperature is not in our current sources. | |
| PolyLite PLA | — | Nozzle temperature is not in our current sources. | |
| PolyLite PLA Pro | — | Nozzle temperature is not in our current sources. | |
| PolyLite PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| PolySonic PLA | — | Nozzle temperature is not in our current sources. | |
| PolySonic PLA Pro | — | Nozzle temperature is not in our current sources. | |
| Precision 3D Filament Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Precision 3D Filament PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Easyprint Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Easyprint PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Flame Retardant PrimaSelect PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Gradient PrimaSelect PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Marble PrimaSelect PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Metal Shine PrimaSelect PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Metal Shine Primaselect Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Pastel PrimaSelect PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator PLA CF | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| PrimaCreator Primaselect Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| PrimaCreator Primavalue High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primavalue Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primavalue PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Satin PrimaSelect PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Sparkle PrimaSelect PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaSelect PLA | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA Glossy | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA Matt | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA METAL | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA PRO | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA Satin | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA Wood | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect Tough PLA | — | Nozzle temperature is not in our current sources. | |
| PrimaValue PLA | — | Nozzle temperature is not in our current sources. | |
| Print With Smile PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Print With Smile PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Print With Smile Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Bicolor Magic Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Elixir Jessie Premium Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| PrintedSolid Gradient Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Jessie Premium PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| PrintedSolid Rainbow Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Shiny Gradient Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid TriColor Magic Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB HS-PLA | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Glow | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Professional LAB PLA Marble | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Matte | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Meta | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Pastel | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Silk Dual | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Silk Tri | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Wood | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Prografen PLA Graphene Light | — | Nozzle temperature is not in our current sources. | |
| Prografen PLA Graphene Strong | — | Nozzle temperature is not in our current sources. | |
| Push Plastic High Heat PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Matte Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Matte Rapido | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Metal Rapido | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Rapido | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Silk Rapido | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Wood | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Recreus PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| RecyclingFabrik Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| RecyclingFabrik PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| RecyclingFabrik Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Galaxy PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| ROSA3D Filaments LW AERO PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Magic PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Magic Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Matte PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| ROSA3D Filaments Multicolour Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Pastel PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| ROSA3D Filaments PLA Starter Neon Green Glow in the Dark | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| ROSA3D Filaments Plus ProSpeed Impact PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Rainbow Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ReFill PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ReFill Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Speed Matt Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Starter PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Glossy Gt 3 Silk High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart High Flowability Flexible Gt 3 PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Lite Gt 3 High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D Go&Print PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D HR-870 PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PLA 700 | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PLA 850 | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PLA Silk 850 | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D Wood PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siddament Siddament | — | Nozzle temperature is not in our current sources. | |
| Slic3D PLA Basic | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Crystal PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| SMART MATERIALS 3D Neon PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Pastel PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA 3D850 | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA 3D870 | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA EP Easy Print | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA Iris | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Recycled PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Wood PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SmartPrint HS-PLA | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Glow | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| SmartPrint PLA Marble | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Matte | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Meta | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Silk | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Silk Dual | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Silk Tri | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Wood | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Snapmaker Basic PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Breakaway Support for PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Glow-in-the-dark PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Snapmaker Matte PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker PLA Full Spectrum | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Snapmaker PLA-CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Snapmaker Silk Dual-Color PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Silk PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker SnapSpeed PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Wood PLA | — | Nozzle temperature is not in our current sources. | |
| SOVB 3D Fil PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Crystal Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum FlameGuard PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum FlameGuard Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Glitter Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Spectrum High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Huracan PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Huracan Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum LW-PLA UltraFoam | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Metal Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Pastello PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA AquaPrint | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Carbon | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Spectrum PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Spectrum PLA Crystal | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Electrically Conductive | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Glitter | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Glow in the Dark | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Spectrum PLA GreenyHT | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA GreenyPro | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Magic SILK | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA MATT | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Metal | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Nature | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Premium | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Premium HighSpeed | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA SILK | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA SILK Rainbow | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Thermoactive | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Tough | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA WOOD | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum R PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum SafeGuard PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Stone Age PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| StrongHero3D N2 N3 Multi Color | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TECBEARS Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| TECBEARS PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TECBEARS Plus High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TECBEARS Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Aura PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| TEQStone Marble PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| TEQStone Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament HT-PLA | — | Nozzle temperature is not in our current sources. | |
| The Filament PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| The Filament PLA HS | — | Nozzle temperature is not in our current sources. | |
| The Filament PLA Lite | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament PLA Matte | — | Nozzle temperature is not in our current sources. | |
| TINMORRY Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| TINMORRY Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| TINMORRY Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| UniTak3D PLA Matte | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Verbatim PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Voxel PLA PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Winkle HD PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle High Speed PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle PLA UL94 V0 | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| XZN Gradient PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN Marble PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| XZN Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN Transparent PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ZIRO 3D Fluorescence PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ZIRO 3D Glitter Diamond PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ZIRO 3D Gradiant Matte PLA | — | Bed temperature is not in our current sources. | |
| ZIRO 3D Gradient Color PLA Silk | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ZIRO 3D Gradient Twinkling PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Glow PLA | Partial | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. | |
| Zyltech Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech PLA CF | Partial | This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. | |
| Zyltech Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Texas Twister Series Multi Color Matte PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Texas Twister Series Multi Color PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Texas Twister Series Multi Color Silk PLA | Fits | P1P can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab P1P against 877 PLA products: 587 fit, 104 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 186 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare