Partial

ELEGOO PLA Glow on the P1P

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

Nozzle190–230 °C
Bed35–65 °C
Speed—
Dry55 °C maximum
Density1.24 g/cm³

Print at 190–230 °C nozzle, 35–65 °C bed. Dry at 55 °C if it's been open. No drying time on the source.

Nozzle190–230 °C

Bed35–65 °C

Shared scale, 0–320 °C. A missing bar means the manufacturer did not publish that temperature.

P1P maximums: nozzle 300 °C, bed 100 °C.

Filament page · P1P

Sources & notes

Bambu Lab P1P with ELEGOO PLA Glow: This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened.

Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.

Filament source · Printer source · Filament JSON

The P1S store comparison lists the P1P shell as an open frame, a stainless steel nozzle, a 300 °C maximum hot end, and a 100 °C maximum build plate.

The P1 series page describes a direct-drive extruder and multi-color printing with the AMS.

Questions

Can the Bambu Lab P1P reach the listed PLA Glow nozzle temperature?

The listed nozzle maximum of 230 °C is within this printer's maximum of 300 °C.

Can the P1P reach the listed bed temperature?

The listed bed maximum of 65 °C is within this printer's maximum of 100 °C.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened.