MatterHackers PLA
Nozzle 190–230 °C (374–446 °F) · Bed 50–70 °C (122–158 °F)
Search Amazon
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–230 °C (374–446 °F)
- Bed50–70 °C (122–158 °F)
- Speed—
- Dry—
- Density1.24 g/cm³
Source: Open Filament Database
Nozzle190–230 °C (374–446 °F)
Bed50–70 °C (122–158 °F)
Printers
Fits means nozzle, bed, and enclosure all pass. Partial means the full recommended range is out of reach. A missing essential check is not a fit.
- A1
- A1 mini
- P1P
- P1S
- X1C
- X2D
- P2S
- H2D
- H2S
- MK4S
- Core One+
- XL
- K1C
- CentauriNot enough data
- Kobra 3 Max
- Q1 ProNot enough data
- SV08 Max
Colors
- Black MH Build Series#000000
- Black Series#000000
- Blue MH Build Series#0E21AE
- Blue Series#2E56F1
- Brown MH Build Series#6E4325
- Brown Series#7E472A
- Burgundy Series#AA0101
- Burnt Orange Series#E03F26
- Caribbean Blue Series#0099E6
- Electric Magenta Series#F2306E
- Electric Orange Series#E03F26
- Electric Pink Series#FF00A2
- Electric Yellow Series#FBE200
- Emerald Dream Series#06924D
- Firefly Green Series#C6F666
- Forest Green MH Build Series#11784F
- Gold MH Build Series#FFCB47
- Gold Series#A78403
- Gray Series#C5C5BF
- Green MH Build Series#668C80
- Green Series#089A45
- Grey MH Build Series#88899D
- Jet Gray Series#55657C
- Light Blue MH Build Series#1ADAFB
- Light Blue Series#1ADAFB
- Lilac Pastel Series#C7BCF8
- Lime Green MH Build Series#9AED51
- Lime Green Series#00CC00
- Magenta MH Build Series#C80181
- Magenta Series#E34A94
- Merlot Red Series#8A2D40
- Midnight Blue Series#1E2F5A
- Natural MH Build Series#DFDFD3
- Natural Translucent Series#F2EFE9
- Orange MH Build Series#FF7A33
- Orange Series#FA8423
- Paper White Series#F5F5F4
- Parthenon Gray Marble Series#EDF0F2
- Pink MH Build Series#FF72B6
- Purple MH Build Series#7142A3
- Purple Series#6802BC
- Red MH Build Series#E03F26
- Red Series#F00C00
- Royal Blue MH Build Series#2E56F1
- Royal Blue Series#2E56F1
- Silver MH Build Series#ABACB0
- Silver Series#C9D0D4
- Solar Flare Series#F27E81
- Tan MH Build Series#E6BA83
- Tan Series#F0DDC2
- Teal Blue Series#3292B2
- Terracotta Red Series#DF3303
- Translucent Blue Series#2E56F1
- Translucent Ice Blue Series#6299DF
- Translucent Red Series#ED1536
- Translucent Violet Series#F300EA
- White MH Build Series#FFFFFF
- White Series#FFFFFF
- Yellow MH Build Series#FFFB00
- Yellow Series#FBE200
Related
Answers
- How do I get good PLA prints?
- What is PLA+ and is it better than PLA?
- Do I need to dry filament, and how?
- How fast can I print PLA and PETG?
Sources & notes
MatterHackers PLA (PLA) has a recommended nozzle temperature of 190–230 °C (374–446 °F) and a recommended bed temperature of 50–70 °C (122–158 °F), according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/matterhackers/materials/PLA/filaments/pla/index.json; dataset imported 2026-10-13).
Dataset imported 13 October 2026.
Source · Brand site · Page JSON
Full specifications
| Material | PLA |
|---|---|
| Nozzle temperature | 190–230 °C (374–446 °F) |
| Bed temperature | 50–70 °C (122–158 °F) |
| Print speed | — |
| Volumetric flow | — |
| Drying | — |
| Enclosure required | — |
| Chamber temperature | — |
| Hardened nozzle | — |
| Spool weight | 1 kg (1000 g) |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.02 mmRecorded by the Open Filament Database. It is a required field there, including conventional values. |
| Recorded density | 1.24 g/cm³Recorded by the Open Filament Database. It is a required field there, including conventional values. |
| Minimum nozzle diameter | — |
| Shore A hardness | — |
| Certifications | — |
| Price per kg | — |
| Dataset imported | 13 October 2026Open Filament Database generation date, not a lab test. |
A blank was blank in the source. Nothing here is estimated.
Printer notes
| Printer | Result | Why |
|---|---|---|
| Bambu Lab A1 | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab A1 mini | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 80 °C (176 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1P | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1S | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab X1 Carbon | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 110 °C (230 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab X2D | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P2S | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 110 °C (230 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab H2D | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 350 °C (662 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab H2S | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 350 °C (662 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa MK4S | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 290 °C (554 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa CORE One+ | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 290 °C (554 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa XL | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 290 °C (554 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Creality K1C | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Elegoo Centauri Carbon | — | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 320 °C (608 °F). This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Anycubic Kobra 3 Max | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 90 °C (194 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Qidi Q1 Pro | — | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 350 °C (662 °F). This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Sovol SV08 Max | Fits | The listed nozzle maximum of 230 °C (446 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
Questions
What nozzle temperature does MatterHackers PLA recommend?
MatterHackers PLA lists a recommended nozzle temperature of 190–230 °C (374–446 °F).
What bed temperature does MatterHackers PLA recommend?
MatterHackers PLA lists a recommended bed temperature of 50–70 °C (122–158 °F).
What print speed does MatterHackers PLA list?
Print speed and volumetric flow are not in our current sources in the imported sources.
Does MatterHackers PLA require an enclosure?
An enclosure requirement is not in our current sources. No chamber temperature is listed either.
Does MatterHackers PLA require a hardened nozzle?
A hardened-nozzle requirement is not in our current sources.
How should MatterHackers PLA be dried?
Drying temperature and drying time for MatterHackers PLA are not in our current sources.
What spool weights does MatterHackers PLA come in?
Listed spool weights: 1 kg (1000 g).
What is the price per kilogram of MatterHackers PLA?
Price per kilogram is not in our current sources.
Provenance
Open Filament Database
License MIT. Record. Repository. Fields: bedTempC, brand, colors, densityGCm3, diameterToleranceMm, diametersMm, material, nozzleTempC, product, spoolWeightsG.