Anycubic PLA Translucent
Published . Updated .
Print settings for Anycubic PLA Translucent, copied from the maker's data.
Commission on these links. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 200–230 °C (392–446 °F).
- Bed: 55–70 °C (131–158 °F).
- Print speed: 50–250 mm/s.
- Enclosure: the maker does not list one as required.
- A hardened nozzle is not required.
Will it work on a printer?
Yes, it works means the nozzle, the bed, and an enclosure all clear that printer. Works with a caveat means the full recommended range is out of reach. A missing essential check is not a yes.
Works on 20 of 23 printers we track.
Colors
- Translucent Pink#FFA3B5
- Translucent Orange#FF671F
- Translucent Red#BA0C2F
- Translucent Blue#0033A0
- Translucent Purple#84329B
- Translucent Black#332F21
Related
Where these numbers come from
Anycubic PLA Translucent (PLA) lists 200–230 °C (392–446 °F) nozzle and 55–70 °C (131–158 °F) bed, from the Anycubic product page (https://store.anycubic.com/products/pla-translucent), checked 2026-10-26. The same check lists print speed 50–250 mm/s, drying 50–55 °C (122–131 °F) for 6–8 h, volumetric flow up to 12 mm³/s, an enclosure is not required, a hardened nozzle is not required, listed price $19.99, not stored as a price per kilogram.
Manufacturer page checked 26 October 2026. This record is not from the Open Filament Database. Manufacturer page checked 26 October 2026.
Listed price $19.99 on the product page. Not recorded as a price per kilogram.
Full specifications
| Material | PLA |
|---|---|
| Nozzle temperature | 200–230 °C (392–446 °F) |
| Bed temperature | 55–70 °C (131–158 °F) |
| Print speed | 50–250 mm/s |
| Volumetric flow | up to 12 mm³/s |
| Drying | 50–55 °C (122–131 °F) for 6–8 h |
| Enclosure required | Not listed by the maker |
| Chamber temperature | Not listed by the maker |
| Hardened nozzle | Not listed by the maker |
| Spool weight | Not listed by the maker |
| Diameter | Not listed by the maker |
| Diameter tolerance | Not listed by the maker |
| Recorded density | 1.22 g/cm³ |
| Minimum nozzle diameter | 0.2 mm |
| Shore A hardness | Not listed by the maker |
| Certifications | Not listed by the maker |
| Price per kg | Not listed by the maker |
| Manufacturer page checked | 26 October 2026Anycubic product page |
Not listed by the maker means the source did not publish that figure.
Provenance
Anycubic product page
License Manufacturer product page. Record. Repository. Fields: nozzleTempC, bedTempC, speeds.printMmS, speeds.volumetricMm3S, drying, densityGCm3, minNozzleDiameterMm, enclosure.required, hardenedNozzle, colors.