Dryers
Filament dryers you can buy
Published . Updated .
26 filament dryers are listed here; 5 reach 85 °C (185 °F) for ABS
Not sure what your dryer covers? Use the coverage checker
Get this deal by email
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
No dryer in this list matches that filter.
Stand-alone dryers
| Dryer | Highest temperature | Spools it holds | Can you print while it dries? | Handles | Price | Buy |
|---|---|---|---|---|---|---|
| Kingroon Filament Dryer Box A budget dryer with four heat settings (45, 50, 55 or 60 °C / 113-140 °F), a 48-hour timer and a humidity display. | 60 °C (140 °F) | Not listed by the maker | Not listed by the maker | PLA No · PETG No · ABS No · nylon No | $29.99, checked 27 October 2026 | Buy |
| SUNLU FilaDryer S1 Plus A low-cost one-spool dryer with a fan; the spool sits on rollers so you can print while it dries, but it only warms to 55 °C (131 °F). | 55 °C (131 °F) | 1 spool, up to 210 mm wide and 85 mm tall (SUNLU spec); 1.75, 2.85 and 3.00 mm filament | Yes | PLA No · PETG No · ABS No · nylon No | $32.29, checked 27 October 2026 | Buy |
| eSUN eBOX Lite A cheap one-spool box that keeps filament warm (about 40-55 °C / 104-131 °F) and dry while you print; not strong enough for nylon. | 55 °C (131 °F) | 1 spool, 0.5 kg or 1 kg (up to 200 mm wide and 73 mm tall per Amazon listing) | Yes | PLA No · PETG No · ABS No · nylon No | $35.99, checked 27 October 2026 | Buy |
| Sovol SH01 An entry-level two-spool dryer box that only warms to 40-50 °C (104-122 °F), fine for PLA basics. | 50 °C (122 °F) | 2 spools of 1 kg | Yes | PLA No · PETG No · ABS No · nylon No | $39.99, checked 27 October 2026 | Buy |
| SUNLU FilaDryer S2 A one-spool dryer with a touchscreen that reaches 70 °C (158 °F) and lets filament feed to the printer while it dries. | 70 °C (158 °F) | 1 spool, up to 210 mm wide and 85 mm tall (per SUNLU's Amazon listing; maker page does not list size) | Yes | PLA No · PETG No · ABS No · nylon No | $44.99, checked 27 October 2026 | Buy |
| LANDU Filament Dryer 2.0 (2 spools) A two-spool dryer box that heats from 50 to 70 °C (122-158 °F) with a built-in fan. | 70 °C (158 °F) | 2 spools of 1 kg; 4 filament holes for two printers | Yes | PLA No · PETG No · ABS No · nylon No | $46.99, checked 27 October 2026 | Buy |
| EIBOS Easdry A low-price one-spool dryer with a temperature knob (40-65 °C / 104-149 °F) and a humidity display; you can feed from the box. | 65 °C (149 °F) | 1 spool up to 220 mm wide and 72 mm tall | Yes | PLA No · PETG No · ABS No · nylon No | $54.99, checked 27 October 2026 | Buy |
| Sovol SH02 A two-spool dryer with a touchscreen that heats to 70 °C (158 °F) in about 25 minutes. | 70 °C (158 °F) | 2 spools (per Amazon listing; maker page does not state) | Not listed by the maker | PLA No · PETG No · ABS No · nylon No | $61.74, checked 27 October 2026 | Buy |
| ELEGOO H1 HT A dryer that turns the spool for even drying, reaches 85 °C (185 °F), vents moisture automatically and has a touchscreen with 11 presets. | 85 °C (185 °F) | Not listed by the maker | Not listed by the maker | PLA Yes · PETG Yes · ABS Yes · nylon No | $70.00, checked 27 October 2026 | Buy |
| Polymaker PolyDryer (dryer dock + box) A heating dock plus a sealed storage box; you can print straight from the sealed box. | Not listed by the maker | 1 spool up to 1 kg per box (larger 3 kg Box XL sold separately) | Yes | PLA No · PETG No · ABS No · nylon No | $71.99, checked 27 October 2026 | Buy |
| SUNLU FilaDryer SP2 (dryer base + storage box) A heating base plus a sealed storage box that holds big spools up to 3 kg; reaches 70 °C (158 °F) and the box has holes for feeding the printer. | 70 °C (158 °F) | Two 1 kg spools, or one 2 kg or 3 kg spool (up to 250 mm wide and 153 mm tall) | Yes | PLA No · PETG No · ABS No · nylon No | $76.49, checked 27 October 2026 | Buy |
| Creality Multi-kilo Filament Dryer A dryer built for big spools (1 kg up to 5 kg) with a heating module you can detach, reaching 70 °C (158 °F). | 70 °C (158 °F) | Fits 1 kg, 2 kg, 3 kg and 5 kg spools | Not listed by the maker | PLA No · PETG No · ABS No · nylon No | $79.00, checked 27 October 2026 | Buy |
| Creality Space Pi V2 A simple touchscreen dryer with hot air that circulates all around the spool and heats up to 75 °C (167 °F). | 75 °C (167 °F) | Not listed by the maker | Not listed by the maker | PLA Yes · PETG No · ABS No · nylon No | $84.90, checked 27 October 2026 | Buy |
| Creality Space Pi V2 Plus A two-spool version of the Space Pi with touchscreen presets for 12 filament types. | 70 °C (158 °F) | 2 spools (page says 'two rolls capacity'); 1.75 and 2.85 mm filament | Not listed by the maker | PLA No · PETG No · ABS No · nylon No | $89.00, checked 27 October 2026 | Buy |
| EIBOS Cyclopes A two-spool dryer box that reaches 70 °C (158 °F), has a humidity display and ten holes to feed printers. | 70 °C (158 °F) | 2 spools of 1 kg, or 4 spools of 0.5 kg (up to 217 mm wide and 80 mm tall) | Yes | PLA No · PETG No · ABS No · nylon No | $89.99, checked 27 October 2026 | Buy |
| EIBOS Polyphemus A dryer that rotates the spool for even heat and reaches 80 °C (176 °F), with a humidity-hold mode. | 80 °C (176 °F) | 2 spools (210 mm wide, 80 mm tall) or 1 spool 170 mm tall; 3 kg spools with add-on kit | Not listed by the maker | PLA Yes · PETG Yes · ABS No · nylon No | $99.99, checked 27 October 2026 | Buy |
| eSUN eBOX (with scale) A heated storage box that also weighs your spool to show how much filament is left. | Not listed by the maker | Not listed by the maker | Not listed by the maker | PLA No · PETG No · ABS No · nylon No | $99.99, checked 27 October 2026 | Buy |
| SUNLU FilaDryer S4 A big four-spool dryer that heats up to 70 °C (158 °F) and can feed several printers at once. | 70 °C (158 °F) | 4 spools of 1 kg (inside 450 x 210 x 211 mm); 1.75, 2.85, 3.00 mm filament | Yes | PLA No · PETG No · ABS No · nylon No | $116.99, checked 27 October 2026 | Buy |
| Creality SpacePi X4L (Lite) A cheaper four-spool, two-chamber dryer that reaches 75 °C (167 °F); you can feed filament to the printer through a tube after drying. | 75 °C (167 °F) | 4 spools of 1 kg or 2 kg, up to 200 mm wide (spool width limit stated as 150 mm in specs and 50 mm in FAQ - inconsistent) | Yes | PLA Yes · PETG No · ABS No · nylon No | $119.00, checked 27 October 2026 | Buy |
| SUNLU FilaDryer S4 Pro Four-spool dryer with two chambers you can set to different temperatures, reaching 85 °C (185 °F) with an annealing mode. | 85 °C (185 °F) | 4 spools of 1 kg, in two separate chambers (220 x 210 x 211 mm each) | Not listed by the maker | PLA Yes · PETG Yes · ABS Yes · nylon No | $139.99, checked 27 October 2026 | Buy |
| Sovol SH03 A four-spool, two-chamber dryer that reaches 85 °C (185 °F) and vents moisture automatically. | 85 °C (185 °F) | 4 spools of 1 kg (each up to 70 mm wide), or 2 spools up to 150 mm wide; two separate chambers | Not listed by the maker | PLA Yes · PETG Yes · ABS Yes · nylon No | $149.99, checked 27 October 2026 | Buy |
| Creality SpacePi X4 A four-spool dryer with two separate chambers that heats to 85 °C (185 °F), removes moisture actively and lets you dry and print at once. | 85 °C (185 °F) | 4 spools in two separate heated chambers (spool size not stated on page) | Yes | PLA Yes · PETG Yes · ABS Yes · nylon No | $159.00, checked 27 October 2026 | Buy |
Printer add-on dryers
These work with specific printers.
| Dryer | Highest temperature | Spools it holds | Can you print while it dries? | Handles | Price | Buy |
|---|---|---|---|---|---|---|
| Bambu Lab AMS HT A one-spool feeder with a strong heater for high-heat filaments, up to 85 °C (185 °F). | 85 °C (185 °F) | 1 spool of 1.75 mm filament (spool width 50-68 mm, diameter 197-202 mm) | Yes | PLA Yes · PETG Yes · ABS Yes · nylon No | $119.00, checked 27 October 2026 | Buy |
| Bambu Lab AMS 2 Pro Bambu's multi-spool feeder that also dries filament, up to 65 °C (149 °F); it feeds the printer, so it works while printing on supported printers. | 65 °C (149 °F) | 4 spools of 1.75 mm filament (spool width 50-68 mm, diameter 197-202 mm) | Yes | PLA No · PETG No · ABS No · nylon No | $229.00, checked 27 October 2026 | Buy |
| EIBOS Tetras (AMS dryer add-on) A four-chamber dryer made to sit with a Bambu AMS so you can dry while printing, up to 65 °C (149 °F). | 65 °C (149 °F) | 4 spools, one per chamber (up to 205 mm wide and 68 mm tall each) | Yes | PLA No · PETG No · ABS No · nylon No | $239.99, checked 27 October 2026 | Buy |
| Anycubic ACE 2 Pro A four-spool feeder and dryer for certain Anycubic printers (Kobra X, S1, S1 Max); it dries up to 65 °C (149 °F) while printing. | 65 °C (149 °F) | 4 spools (4 feed channels); spool flange 195-200 mm, width 60-68 mm | Yes | PLA No · PETG No · ABS No · nylon No | $319.99, checked 27 October 2026 | Buy |