Data
Filament heat resistance
HDT values are only comparable when the load and standard match. Rows that do not state a load are shown and marked “load not stated”. A missing figure stays blank.
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
CSV · JSON · 36 rows, checked 20 October 2026.
No rows match this filter.
| Brand | Product | Material | HDT | HDT load | HDT standard | Vicat | Vicat standard | Tg | Source | |
|---|---|---|---|---|---|---|---|---|---|---|
| QIDI Tech | ABS Metal Rapido Load not stated on the product page; check the linked TDS before comparing across brands. | ABS | 75 °C (167 °F) | load not stated | — | 91 °C (196 °F) | — | — | ABS Metal Filament | Tough, No-Paint Metallic Finish – QIDI US Store · Last checked 2026-10-20 | ABS Metal Rapido · QIDI Tech · ABS75 °C (167 °F)ABS Metal Filament | Tough, No-Paint Metallic Finish – QIDI US Store · Last checked 2026-10-20 |
| PrimaCreator | Primaselect ABS Load not stated on the product page; check the linked TDS before comparing across brands. | ABS | — | — | — | 95 °C (203 °F) | ISO 306 | — | PrimaSelect ABS - PrimaCreator · Last checked 2026-10-20 | Primaselect ABS · PrimaCreator · ABS—PrimaSelect ABS - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | ASA Load not stated on the product page; check the linked TDS before comparing across brands. | ASA | 94 °C (201 °F) | load not stated | ISO 75 | 100 °C (212 °F) | ISO 306 | — | PrimaSelect ASA - PrimaCreator · Last checked 2026-10-20 | ASA · PrimaCreator · ASA94 °C (201 °F)PrimaSelect ASA - PrimaCreator · Last checked 2026-10-20 |
| QIDI Tech | PA12-CF Load not stated on the product page; check the linked TDS before comparing across brands. | PA12 | 78.4 °C (173 °F) | load not stated | — | — | — | — | PA12-CF Carbon Fiber Filament | High-Strength – QIDI US Store · Last checked 2026-10-20 | PA12-CF · QIDI Tech · PA1278.4 °C (173 °F)PA12-CF Carbon Fiber Filament | High-Strength – QIDI US Store · Last checked 2026-10-20 |
| PrimaCreator | PC Load not stated on the product page; check the linked TDS before comparing across brands. | PC | 107 °C (225 °F) | load not stated | ISO 75 | 116 °C (241 °F) | ISO 306 | — | PrimaSelect PC - PrimaCreator · Last checked 2026-10-20 | PC · PrimaCreator · PC107 °C (225 °F)PrimaSelect PC - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | Primaselect PC Load not stated on the product page; check the linked TDS before comparing across brands. | PC | 107 °C (225 °F) | load not stated | ISO 75 | 116 °C (241 °F) | ISO 306 | — | PrimaSelect PC - PrimaCreator · Last checked 2026-10-20 | Primaselect PC · PrimaCreator · PC107 °C (225 °F)PrimaSelect PC - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | PC CF Load not stated on the product page; check the linked TDS before comparing across brands. | PC | 102 °C (216 °F) | load not stated | ISO 75 | — | — | — | PrimaSelect PC-CF - PrimaCreator · Last checked 2026-10-20 | PC CF · PrimaCreator · PC102 °C (216 °F)PrimaSelect PC-CF - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | Primaselect PC CF Load not stated on the product page; check the linked TDS before comparing across brands. | PC | 102 °C (216 °F) | load not stated | ISO 75 | — | — | — | PrimaSelect PC-CF - PrimaCreator · Last checked 2026-10-20 | Primaselect PC CF · PrimaCreator · PC102 °C (216 °F)PrimaSelect PC-CF - PrimaCreator · Last checked 2026-10-20 |
| QIDI Tech | PC/ABS-FR Load not stated on the product page; check the linked TDS before comparing across brands. | PC | 102 °C (216 °F) | load not stated | — | — | — | — | Flame-Retardant PC/ABS-FR Filament | High Heat & Toughness – QIDI US Store · Last checked 2026-10-20 | PC/ABS-FR · QIDI Tech · PC102 °C (216 °F)Flame-Retardant PC/ABS-FR Filament | High Heat & Toughness – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PETG-CF Load not stated on the product page; check the linked TDS before comparing across brands. | PETG | 77 °C (171 °F) | load not stated | — | 83 °C (181 °F) | — | — | PETG-CF Carbon Fiber Filament | High Strength Matte PETG – QIDI US Store · Last checked 2026-10-20 | PETG-CF · QIDI Tech · PETG77 °C (171 °F)PETG-CF Carbon Fiber Filament | High Strength Matte PETG – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PETG-GF Load not stated on the product page; check the linked TDS before comparing across brands. | PETG | 76 °C (169 °F) | load not stated | — | 85 °C (185 °F) | — | — | PETG-GF Reinforced PETG Filament | Matte, High-Strength – QIDI US Store · Last checked 2026-10-20 | PETG-GF · QIDI Tech · PETG76 °C (169 °F)PETG-GF Reinforced PETG Filament | Matte, High-Strength – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PETG Basic Load not stated on the product page; check the linked TDS before comparing across brands. | PETG | 71.8 °C (161 °F) | load not stated | — | — | — | — | PETG Filament for 3D Printing | Strong, Low-Warp – QIDI US Store · Last checked 2026-10-20 | PETG Basic · QIDI Tech · PETG71.8 °C (161 °F)PETG Filament for 3D Printing | Strong, Low-Warp – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PETG Translucent Load not stated on the product page; check the linked TDS before comparing across brands. | PETG | 71.8 °C (161 °F) | load not stated | — | — | — | — | Translucent PETG Filament | Fast, UV-Resistant 1kg – QIDI US Store · Last checked 2026-10-20 | PETG Translucent · QIDI Tech · PETG71.8 °C (161 °F)Translucent PETG Filament | Fast, UV-Resistant 1kg – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PETG Rapido Load not stated on the product page; check the linked TDS before comparing across brands. | PETG | 70 °C (158 °F) | load not stated | — | 83 °C (181 °F) | — | — | PETG Rapido Filament | High-Speed PETG 300mm/s – QIDI US Store · Last checked 2026-10-20 | PETG Rapido · QIDI Tech · PETG70 °C (158 °F)PETG Rapido Filament | High-Speed PETG 300mm/s – QIDI US Store · Last checked 2026-10-20 |
| PrimaCreator | Primaselect PETG Load not stated on the product page; check the linked TDS before comparing across brands. | PETG | 69 °C (156 °F) | load not stated | ISO 75 | 76 °C (169 °F) | ISO 306 | — | PrimaSelect PETG - PrimaCreator · Last checked 2026-10-20 | Primaselect PETG · PrimaCreator · PETG69 °C (156 °F)PrimaSelect PETG - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | Marble PrimaSelect PLA Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 59 °C (138 °F) | load not stated | ISO 75 | 59 °C (138 °F) | ISO 306 | — | PrimaSelect PLA Marble - PrimaCreator · Last checked 2026-10-20 | Marble PrimaSelect PLA · PrimaCreator · PLA59 °C (138 °F)PrimaSelect PLA Marble - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | Sparkle PrimaSelect PLA Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 59 °C (138 °F) | load not stated | ISO 75 | 63 °C (145 °F) | ISO 306 | — | PrimaSelect PLA Sparkle - PrimaCreator · Last checked 2026-10-20 | Sparkle PrimaSelect PLA · PrimaCreator · PLA59 °C (138 °F)PrimaSelect PLA Sparkle - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | Metal Shine PrimaSelect PLA Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 58 °C (136 °F) | load not stated | ISO 75 | 62 °C (144 °F) | ISO 306 | — | PrimaSelect PLA Metal-Shine - PrimaCreator · Last checked 2026-10-20 | Metal Shine PrimaSelect PLA · PrimaCreator · PLA58 °C (136 °F)PrimaSelect PLA Metal-Shine - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | Pastel PrimaSelect PLA Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 58 °C (136 °F) | load not stated | ISO 75 | 57 °C (135 °F) | ISO 306 | — | PrimaSelect PLA Pastel - PrimaCreator · Last checked 2026-10-20 | Pastel PrimaSelect PLA · PrimaCreator · PLA58 °C (136 °F)PrimaSelect PLA Pastel - PrimaCreator · Last checked 2026-10-20 |
| QIDI Tech | PLA Metal Rapido Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 58 °C (136 °F) | load not stated | — | 62 °C (144 °F) | — | — | PLA Metal Filament | Metallic Finish, Easy to Print – QIDI US Store · Last checked 2026-10-20 | PLA Metal Rapido · QIDI Tech · PLA58 °C (136 °F)PLA Metal Filament | Metallic Finish, Easy to Print – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PLA Basic Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 57.6 °C (136 °F) | load not stated | — | — | — | — | PLA Filament: Easy-to-Print, Fast & Biodegradable | 1.75mm – QIDI US Store · Last checked 2026-10-20 | PLA Basic · QIDI Tech · PLA57.6 °C (136 °F)PLA Filament: Easy-to-Print, Fast & Biodegradable | 1.75mm – QIDI US Store · Last checked 2026-10-20 |
| PrimaCreator | Primaselect PLA Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 57 °C (135 °F) | load not stated | ISO 75 | 57 °C (135 °F) | ISO 306 | — | PrimaSelect PLA - PrimaCreator · Last checked 2026-10-20 | Primaselect PLA · PrimaCreator · PLA57 °C (135 °F)PrimaSelect PLA - PrimaCreator · Last checked 2026-10-20 |
| QIDI Tech | PLA Matte Basic Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 57 °C (135 °F) | load not stated | — | — | — | — | PLA Matte Filament | Matte Finish, Easy-Print PLA – QIDI US Store · Last checked 2026-10-20 | PLA Matte Basic · QIDI Tech · PLA57 °C (135 °F)PLA Matte Filament | Matte Finish, Easy-Print PLA – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PLA Wood Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 57 °C (135 °F) | load not stated | — | 58 °C (136 °F) | — | — | PLA Wood Filament | Matte Wood-Like 1.75mm, Easy Print – QIDI US Store · Last checked 2026-10-20 | PLA Wood · QIDI Tech · PLA57 °C (135 °F)PLA Wood Filament | Matte Wood-Like 1.75mm, Easy Print – QIDI US Store · Last checked 2026-10-20 |
| PrimaCreator | Flame Retardant PrimaSelect PLA Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 55 °C (131 °F) | load not stated | ISO 75 | 57 °C (135 °F) | ISO 306 | — | PrimaSelect PLA Flame Retardant - PrimaCreator · Last checked 2026-10-20 | Flame Retardant PrimaSelect PLA · PrimaCreator · PLA55 °C (131 °F)PrimaSelect PLA Flame Retardant - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | PLA CF Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 55 °C (131 °F) | load not stated | ISO 75 | 57 °C (135 °F) | ISO 306 | — | PrimaSelect PLA-CF - PrimaCreator · Last checked 2026-10-20 | PLA CF · PrimaCreator · PLA55 °C (131 °F)PrimaSelect PLA-CF - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | Primaselect PLA CF Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 55 °C (131 °F) | load not stated | ISO 75 | 57 °C (135 °F) | ISO 306 | — | PrimaSelect PLA-CF - PrimaCreator · Last checked 2026-10-20 | Primaselect PLA CF · PrimaCreator · PLA55 °C (131 °F)PrimaSelect PLA-CF - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | Gradient PrimaSelect PLA Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 53 °C (127 °F) | load not stated | ISO 75 | 60 °C (140 °F) | ISO 306 | — | PrimaSelect PLA Gradient - PrimaCreator · Last checked 2026-10-20 | Gradient PrimaSelect PLA · PrimaCreator · PLA53 °C (127 °F)PrimaSelect PLA Gradient - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | Satin PrimaSelect PLA Load not stated on the product page; check the linked TDS before comparing across brands. | PLA | 53 °C (127 °F) | load not stated | ISO 75 | 60 °C (140 °F) | ISO 306 | — | PrimaSelect PLA Satin - PrimaCreator · Last checked 2026-10-20 | Satin PrimaSelect PLA · PrimaCreator · PLA53 °C (127 °F)PrimaSelect PLA Satin - PrimaCreator · Last checked 2026-10-20 |
| QIDI Tech | UltraPA-CF25 Load not stated on the product page; check the linked TDS before comparing across brands. | PPA | 196.9 °C (386 °F) | load not stated | — | — | — | — | Carbon-Fiber Nylon Filament 25% CF | High-Temp PPA-CF – QIDI US Store · Last checked 2026-10-20 | UltraPA-CF25 · QIDI Tech · PPA196.9 °C (386 °F)Carbon-Fiber Nylon Filament 25% CF | High-Temp PPA-CF – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PAHT-GF Load not stated on the product page; check the linked TDS before comparing across brands. | PPA | 80 °C (176 °F) | load not stated | — | — | — | — | PAHT-GF High-Temp Nylon | Wear-Resistant Filament – QIDI US Store · Last checked 2026-10-20 | PAHT-GF · QIDI Tech · PPA80 °C (176 °F)PAHT-GF High-Temp Nylon | Wear-Resistant Filament – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | UltraPA Load not stated on the product page; check the linked TDS before comparing across brands. | PPA | 72.5 °C (163 °F) | load not stated | — | — | — | — | UltraPA Nylon Filament | High-Strength, Wear-Resistant – QIDI US Store · Last checked 2026-10-20 | UltraPA · QIDI Tech · PPA72.5 °C (163 °F)UltraPA Nylon Filament | High-Strength, Wear-Resistant – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PPS-CF Load not stated on the product page; check the linked TDS before comparing across brands. | PPS | 242.7 °C (469 °F) | load not stated | — | 268 °C (514 °F) | — | — | PPS-CF Carbon Fiber Filament | High-Temp, Flame-Resistant – QIDI US Store · Last checked 2026-10-20 | PPS-CF · QIDI Tech · PPS242.7 °C (469 °F)PPS-CF Carbon Fiber Filament | High-Temp, Flame-Resistant – QIDI US Store · Last checked 2026-10-20 |
| QIDI Tech | PPS-GF20 Load not stated on the product page; check the linked TDS before comparing across brands. | PPS | 236.3 °C (457 °F) | load not stated | — | 272.5 °C (523 °F) | — | — | PPS-GF20 Glass-Filled PPS Filament | High-Temp – QIDI US Store · Last checked 2026-10-20 | PPS-GF20 · QIDI Tech · PPS236.3 °C (457 °F)PPS-GF20 Glass-Filled PPS Filament | High-Temp – QIDI US Store · Last checked 2026-10-20 |
| PrimaCreator | Primaselect PVA Load not stated on the product page; check the linked TDS before comparing across brands. | PVA | — | — | — | 95 °C (203 °F) | ISO 306 | — | PrimaSelect PVA - PrimaCreator · Last checked 2026-10-20 | Primaselect PVA · PrimaCreator · PVA—PrimaSelect PVA - PrimaCreator · Last checked 2026-10-20 |
| PrimaCreator | PVA Load not stated on the product page; check the linked TDS before comparing across brands. | PVA | — | — | — | 95 °C (203 °F) | ISO 306 | — | PrimaSelect PVA - PrimaCreator · Last checked 2026-10-20 | PVA · PrimaCreator · PVA—PrimaSelect PVA - PrimaCreator · Last checked 2026-10-20 |
Method
Each number is copied from the linked manufacturer page. HDT load is left as “load not stated” when the page does not print 0.45 MPa or 1.8 MPa. Nothing is inferred from the material family.