Snapmaker PLA Full Spectrum White Edition
Published . Updated .
Print settings for Snapmaker PLA Full Spectrum White Edition, copied from the maker's data.
Commission on these links. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 190–230 °C (374–446 °F).
- Bed: 25–70 °C (77–158 °F).
- Print speed: up to 250 mm/s.
The maker did not list an enclosure or a hardened nozzle.
Will it work on a printer?
Yes, it works means the nozzle, the bed, and an enclosure all clear that printer. Works with a caveat means the full recommended range is out of reach. A missing essential check is not a yes.
Works on 20 of 23 printers we track.
Colors
- Semi-Translucent Cyan#00C3FF
- Semi-Translucent Magenta#F54399
- Semi-Translucent Yellow#FAE727
- Semi-Translucent White#F5F4F2
Related
Where these numbers come from
Snapmaker PLA Full Spectrum White Edition (PLA) lists a recommended nozzle temperature of 190–230 °C (374–446 °F) and a recommended bed temperature of 25–70 °C (77–158 °F), a print speed of up to 250 mm/s, and pre-drying at 55 °C (131 °F) for 6 hours, on the Snapmaker US product page (https://us.snapmaker.com/products/pla-full-spectrum-filament-bundle-white-edition-4kg; page title “PLA Full Spectrum Filament Bundle (White Edition) (RFID) - 4kg”), checked 2026-10-26. The same page lists density 1.238 ± 0.002 g/cm³, filament diameter 1.75 mm ± 0.03 mm, and four 1 kg spools. It lists a price of $69.99 for the 4 kg bundle (compare-at $89.00, SKU 34044), which is not a price per kilogram. Hotends of 0.4 mm or smaller are recommended.
Manufacturer page checked 26 October 2026. This record is not from the Open Filament Database. Manufacturer page checked 26 October 2026.
The product page lists 1.238 ± 0.002 g/cm³.
Listed price $69.99 for the 4 kg bundle (compare-at $89.00, SKU 34044) on the Snapmaker US product page. Not recorded as a price per kilogram. No ASIN on that page.
The page recommends hotends of 0.4 mm or smaller with a layer height of 0.1 mm or lower. That is a color-mixing recommendation, not a minimum nozzle diameter.
The page says the filament has low moisture sensitivity and generally does not require drying. It still lists pre-drying at 55 °C (131 °F) for 6 hours.
Spool colors are named on the product images: Semi-Translucent Cyan (#00C3FF), Semi-Translucent Magenta (#F54399), Semi-Translucent Yellow (#FAE727), and Semi-Translucent White (#F5F4F2).
Full specifications
| Material | PLA |
|---|---|
| Nozzle temperature | 190–230 °C (374–446 °F) |
| Bed temperature | 25–70 °C (77–158 °F) |
| Print speed | up to 250 mm/sVolumetric flow was not on the source. |
| Volumetric flow | Not listed by the maker |
| Drying | 55 °C (131 °F) for 6 h |
| Enclosure required | Not listed by the maker |
| Chamber temperature | Not listed by the maker |
| Hardened nozzle | Not listed by the maker |
| Spool weight | 1 kg (1000 g) |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.03 mm |
| Recorded density | 1.238 g/cm³The product page lists 1.238 ± 0.002 g/cm³. |
| Minimum nozzle diameter | Not listed by the maker |
| Shore A hardness | Not listed by the maker |
| Certifications | Not listed by the maker |
| Price per kg | Not listed by the maker |
| Manufacturer page checked | 26 October 2026Snapmaker product page |
Not listed by the maker means the source did not publish that figure.
Provenance
Snapmaker product page
License Manufacturer product page. Record. Repository. Fields: bedTempC, colors, densityGCm3, diameterToleranceMm, diametersMm, drying.maxTempC, drying.hours, material, nozzleTempC, product, speeds.printMmS, spoolWeightsG.