SUNLU ABS-GF
Published . Updated .
Print settings for SUNLU ABS-GF, copied from the maker's data.
Commission on these links. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 260–280 °C (500–536 °F).
- Bed: 90–100 °C (194–212 °F).
- Print speed: 50–300 mm/s.
The maker did not list an enclosure or a hardened nozzle.
Will it work on a printer?
Yes, it works means the nozzle, the bed, and an enclosure all clear that printer. Works with a caveat means the full recommended range is out of reach. A missing essential check is not a yes.
Works on 8 of 23 printers we track.
Colors
No color variants are listed.
Related
Where these numbers come from
SUNLU ABS-GF (ABS) lists a nozzle temperature of 260–280 °C (500–536 °F) and a bed temperature of 90–100 °C (194–212 °F), print speed 50–300 mm/s, and drying at 80 °C (176 °F), from the SUNLU product page (https://store.sunlu.com/products/sunlu-abs-gf-abs-glass-fiber-3d-printer-filament-1kg), checked 2026-10-24. Drying time is not stated on that page.
Manufacturer page checked 24 October 2026. This record is not from the Open Filament Database. Manufacturer page checked 24 October 2026.
The product page says to apply glue on the bed.
Drying temperature is 80 °C (176 °F). Drying time is not stated, so this row is not in the filament drying dataset.
Hardened nozzle is not stated.
The product page lists density 1.016 g/cm³, glass fiber 10%, HDT 104 °C (219 °F), Vicat 95 °C (203 °F), tensile strength 54 MPa, elongation 10%, flexural strength 90 MPa, flexural modulus 3490 MPa, impact 6.7 kJ/m², and melting temperature 148 °C (298 °F). HDT load and standard are not stated.
Full specifications
| Material | ABS |
|---|---|
| Nozzle temperature | 260–280 °C (500–536 °F) |
| Bed temperature | 90–100 °C (194–212 °F) |
| Print speed | 50–300 mm/sVolumetric flow was not on the source. |
| Volumetric flow | Not listed by the maker |
| Drying | 80 °C (176 °F) maximumNo drying time on the source. |
| Enclosure required | Not listed by the maker |
| Chamber temperature | Not listed by the maker |
| Hardened nozzle | Not listed by the maker |
| Spool weight | 1 kg (1000 g) |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.03 mm |
| Recorded density | 1.016 g/cm³ |
| Minimum nozzle diameter | Not listed by the maker |
| Shore A hardness | Not listed by the maker |
| Certifications | Not listed by the maker |
| Price per kg | Not listed by the maker |
| Manufacturer page checked | 24 October 2026SUNLU product page |
Not listed by the maker means the source did not publish that figure.
Provenance
SUNLU product page
License Manufacturer product page. Record. Repository. Fields: nozzleTempC, bedTempC, speeds.printMmS, drying, densityGCm3, diameterToleranceMm, spoolWeightsG, diametersMm.