SUNLU ABS-GF on the Creality Ender-3 V3 Neo
Published . Updated .
Print settings and compatibility for SUNLU ABS-GF on the Creality Ender-3 V3 Neo, copied from the maker's data.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 260–280 °C (500–536 °F).
- Bed: 90–100 °C (194–212 °F).
- Print speed: 50–300 mm/s.
The maker did not list an enclosure or a hardened nozzle.
Will it work on this printer?
- Ender-3 V3 Neo maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
- The listed nozzle temperature is within this printer's reach.
- The listed bed temperature is within this printer's reach.
- Whether an enclosure is required is not listed by the maker.
- This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.
Related
Where these numbers come from
Filament: SUNLU product page · checked 24 October 2026
Printer: Ender-3 V3 Neo · checked 19 October 2026
SUNLU ABS-GF (ABS) lists a nozzle temperature of 260–280 °C (500–536 °F) and a bed temperature of 90–100 °C (194–212 °F), print speed 50–300 mm/s, and drying at 80 °C (176 °F), from the SUNLU product page (https://store.sunlu.com/products/sunlu-abs-gf-abs-glass-fiber-3d-printer-filament-1kg), checked 2026-10-24. Drying time is not stated on that page.
A figure is copied from a named source, and a missing figure stays blank. Methodology.
The specification table lists nozzle temperature ≤300 °C (572 °F), heatbed temperature ≤100 °C (212 °F), a 220 × 220 × 220 mm build volume, and printing speed ≤500 mm/s.
The extruder is listed as Sprite 2 Extruder. The page does not call it direct drive, and it does not state a nozzle alloy, so those fields are empty.
Filament compatibility is recommended PLA, PETG, and TPU (90A TPU or harder), and supported ABS and ASA with an enclosure recommended. Auto filament refill and identification are listed as yes with CFS nano. The page does not say the printer itself is enclosed.