SUNLU ABS-GF on the Prusa XL
Published . Updated .
Print settings and compatibility for SUNLU ABS-GF on the Prusa XL, copied from the maker's data.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 260–280 °C (500–536 °F).
- Bed: 90–100 °C (194–212 °F).
- Print speed: 50–300 mm/s.
The maker did not list an enclosure or a hardened nozzle.
Will it work on this printer?
- XL maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
- The listed nozzle temperature is within this printer's reach.
- The listed bed temperature is within this printer's reach.
- Whether an enclosure is required is not listed by the maker.
- This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened.
Related
Where these numbers come from
Filament: SUNLU product page · checked 24 October 2026
Printer: Prusa MK4S page comparison table · checked 14 October 2026
SUNLU ABS-GF (ABS) lists a nozzle temperature of 260–280 °C (500–536 °F) and a bed temperature of 90–100 °C (194–212 °F), print speed 50–300 mm/s, and drying at 80 °C (176 °F), from the SUNLU product page (https://store.sunlu.com/products/sunlu-abs-gf-abs-glass-fiber-3d-printer-filament-1kg), checked 2026-10-24. Drying time is not stated on that page.
A figure is copied from a named source, and a missing figure stays blank. Methodology.
The comparison table lists the XL at 290 °C (554 °F) / 120 °C (248 °F) with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C (113 °F) in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
The XL+ product page checked 2026-10-20 lists a 290 °C (554 °F) nozzle and a heatbed up to 115 °C (239 °F), so this record still uses the MK4S comparison table, which lists the XL at 290 °C (554 °F) and 120 °C (248 °F).