FormFutura ASA ApolloX Flame Retardant
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle230–280 °C
- Bed90–110 °C
- Speed—
- Dry—
- Density1.08 g/cm³
FormFutura ASA ApolloX Flame Retardant, from the Open Filament Database. A blank stays blank.
Printers
Fits means nozzle, bed, and enclosure all pass. Partial means the full recommended range is out of reach. A missing essential check is not a fit.
- A1Bed range only partly in reach
- A1 miniBed too hot to print
- P1PBed range only partly in reach
- P1SBed range only partly in reach
- X1CNot enough data
- MK4SNot enough data
- Core One+Not enough data
- XLNot enough data
- K1CBed range only partly in reach
- CentauriNot enough data
- Kobra 3 MaxBed range only partly in reach
- Q1 ProNot enough data
- SV08 MaxBed range only partly in reach
Colors
- Traffic Black#000000
- Traffic White#FFFFFF
Related
Answers
- What is the best filament for outdoor use?
- What filament should I use outdoors?
- What filament should I use for heat?
Sources & notes
FormFutura ASA ApolloX Flame Retardant (ASA) has a recommended nozzle temperature of 230–280 °C and a recommended bed temperature of 90–110 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/formfutura/materials/ASA/filaments/apollox_flame_retardant/index.json; dataset imported 2026-10-13).
Dataset imported 13 October 2026.
Source · Safety sheet · Brand site · Page JSON
Full specifications
| Material | ASA |
|---|---|
| Nozzle temperature | 230–280 °C |
| Bed temperature | 90–110 °C |
| Print speed | — |
| Volumetric flow | — |
| Drying | — |
| Enclosure required | — |
| Chamber temperature | — |
| Hardened nozzle | — |
| Spool weight | 500 g and 1 kg (1000 g) |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.02 mmRecorded by the Open Filament Database. It is a required field there, including conventional values. |
| Recorded density | 1.08 g/cm³Recorded by the Open Filament Database. It is a required field there, including conventional values. |
| Minimum nozzle diameter | 0.2 mm |
| Shore A hardness | — |
| Certifications | — |
| Price per kg | — |
| Dataset imported | 13 October 2026Open Filament Database generation date, not a lab test. |
A blank was blank in the source. Nothing here is estimated.
Printer notes
| Printer | Result | Why |
|---|---|---|
| Bambu Lab A1 | Partial | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab A1 mini | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 90 °C, above this printer's maximum of 80 °C. This printer cannot print this material at the recommended bed temperature. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1P | Partial | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1S | Partial | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab X1 Carbon | — | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 110 °C is within this printer's maximum of 110 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa MK4S | — | The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa CORE One+ | — | The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa XL | — | The listed nozzle maximum of 280 °C is within this printer's maximum of 290 °C. The listed bed maximum of 110 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Creality K1C | Partial | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Elegoo Centauri Carbon | — | The listed nozzle maximum of 280 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Anycubic Kobra 3 Max | Partial | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Qidi Q1 Pro | — | The listed nozzle maximum of 280 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Sovol SV08 Max | Partial | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed range reaches 110 °C, above this printer's maximum of 100 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
Questions
What nozzle temperature does FormFutura ASA ApolloX Flame Retardant recommend?
FormFutura ASA ApolloX Flame Retardant lists a recommended nozzle temperature of 230–280 °C.
What bed temperature does FormFutura ASA ApolloX Flame Retardant recommend?
FormFutura ASA ApolloX Flame Retardant lists a recommended bed temperature of 90–110 °C.
What print speed does FormFutura ASA ApolloX Flame Retardant list?
Print speed and volumetric flow are not in our current sources in the imported sources.
Does FormFutura ASA ApolloX Flame Retardant require an enclosure?
An enclosure requirement is not in our current sources. No chamber temperature is listed either.
Does FormFutura ASA ApolloX Flame Retardant require a hardened nozzle?
A hardened-nozzle requirement is not in our current sources.
How should FormFutura ASA ApolloX Flame Retardant be dried?
Drying temperature and drying time for FormFutura ASA ApolloX Flame Retardant are not in our current sources.
What spool weights does FormFutura ASA ApolloX Flame Retardant come in?
Listed spool weights: 500 g and 1 kg (1000 g).
What is the price per kilogram of FormFutura ASA ApolloX Flame Retardant?
Price per kilogram is not in our current sources.
Provenance
Open Filament Database
License MIT. Record. Repository. Fields: bedTempC, brand, colors, densityGCm3, diameterToleranceMm, diametersMm, material, nozzleTempC, product, spoolWeightsG.