Bambu Lab H2C
Published . Updated .
Yes, it works with 101 of the 114 ASA filaments we track. Most ASA prints between 235 and 260 °C (455–500 °F); listed products range from 200 to 285 °C (392–545 °F). 101 of 114 listed ASA products list a nozzle temperature. Bed temperatures on 102 of 114 are 40–120 °C (104–248 °F). Listed speeds on 17 of 114 are 30–350 mm/s. Drying temperatures on 23 of 114 are 70–90 °C (158–194 °F). ASA settings for the Bambu Lab H2C. These are the spans of the listed products, not one printer preset.
Bambu Lab H2C against 114 ASA products: 101 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 13 are missing an essential check. Manufacturer page checked 27 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA Aero | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab ASA-CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab Matte ASA CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO ASA-CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone ASA High-Speed | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone ASA-GF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D ASA+ | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr DuraPro Matte ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fillamentum ASA Extrafill | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Fibreheart ASA-GF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA 3DXMax | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech ASA CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA Dolos Color Shifting | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA Galactic | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA-CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia ASA-GF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament ASA CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Original | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm ASA Prime | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Silk ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Matte ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberon Fiberon ASA-CF 08 | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM ASA CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE ASA Basic | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX CF10 | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Flame Retardant | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Foaming | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ApolloX Kevlar | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ASA ReForm – rApollo | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSANMATE ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LDO ASA-CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Mosaic ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil X CF CF ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyLite ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyLite Galaxy ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Print With Smile ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Push Plastic ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech ASA-Aero | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA 5Kevlar | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ASA GF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart ASA CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D ASA GF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SmartPrint ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA 275 | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA CF | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA Kevlar | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X CF10 | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum ASA-X GF10 | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum X Gf10 GF ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Aura ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Matte ASA | Fits | H2C can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality HP ASA | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA Light-Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Overture ASA Basic | — | Nozzle temperature is not in our current sources. | |
| 3DO ASA | — | Nozzle temperature is not in our current sources. | |
| Alzament ASA | — | Nozzle temperature is not in our current sources. | |
| GST3D ASA 900Grs | — | Nozzle temperature is not in our current sources. | |
| iSangHu Gradiant ASA | — | Nozzle temperature is not in our current sources. | |
| Nebula ASA Tech 301 | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect ASA+ | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA CF | — | Nozzle temperature is not in our current sources. | |
| Voxelab ASA-CF | — | Nozzle temperature is not in our current sources. |
Commission on these links. As an Amazon Associate we earn from qualifying purchases.
Bambu Lab H2C against 114 ASA products: 101 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 13 are missing an essential check. Manufacturer page checked 27 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare