Anycubic Kobra 3 Max
Anycubic Kobra 3 Max against 113 ASA products: 0 fit, 77 cannot reach the full recommended range, 12 cannot print this material at a recommended temperature, and 24 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic ASA | — | Nozzle temperature is not in our current sources. | |
| Bambu Lab ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Bambu Lab ASA Aero | — | Whether an enclosure is required is not in our current sources. | |
| Bambu Lab ASA-CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Bambu Lab Matte ASA CF | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| colorFabb ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Creality HP ASA | — | Nozzle temperature is not in our current sources. | |
| ELEGOO ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Eryone ASA | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA Light-Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Eryone ASA-GF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ASA+ | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| extrudr DuraPro ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| extrudr DuraPro Matte ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Fillamentum ASA Extrafill | Partial | The listed bed range reaches 105 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Overture ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Overture ASA Basic | — | Nozzle temperature is not in our current sources. | |
| Polymaker ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Polymaker Polylite ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Prusament ASA | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| Siraya Tech Fibreheart ASA-GF | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| SUNLU ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| 3DEA ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| 3DJAKE ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| 3DO ASA | — | Nozzle temperature is not in our current sources. | |
| 3DPower ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| 3DXTech ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| 3DXTech ASA 3DXMax | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| 3DXTech ASA CF | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Alzament ASA | — | Nozzle temperature is not in our current sources. | |
| Ambrosia ASA | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| Ambrosia ASA Dolos Color Shifting | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| Ambrosia ASA Galactic | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| Ambrosia ASA-CF | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| Ambrosia ASA-GF | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| Atomic Filament ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Atomic Filament ASA CF | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| AURAPOL ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| AzureFilm ASA Original | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| AzureFilm ASA Prime | — | Whether an enclosure is required is not in our current sources. | |
| Buddy3D ASA | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| COEX 3D ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| COEX 3D Silk ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Cookiecad ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Devil Design ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Eolas Prints ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| EPAX ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Fiberlogy ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Fiberlogy Matte ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Fiberon Fiberon ASA-CF 08 | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| FilamentPM ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| FilamentPM ASA CF | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| FLASHFORGE ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| FLASHFORGE ASA Basic | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| FormFutura ASA ApolloX | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| FormFutura ASA ApolloX CF10 | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| FormFutura ASA ApolloX Flame Retardant | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| FormFutura ASA ApolloX Foaming | — | Whether an enclosure is required is not in our current sources. | |
| FormFutura ASA ApolloX Kevlar | Partial | The listed bed range reaches 95 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 85 °C, is within that maximum. | |
| FormFutura ASA ReForm – rApollo | — | Whether an enclosure is required is not in our current sources. | |
| Francofil ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| GST3D ASA 900Grs | — | Nozzle temperature is not in our current sources. | |
| IEMAI ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| IEMAI CF-ASA | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| Inslogic ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| iSangHu Gradiant ASA | — | Nozzle temperature is not in our current sources. | |
| iSANMATE ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| LDO ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| LDO ASA-CF | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Mosaic ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Nebula ASA Tech 301 | — | Nozzle temperature is not in our current sources. | |
| Nobufil ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Nobufil X CF CF ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Paramount 3D ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Polar Filament ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| PolyLite ASA | — | Nozzle temperature is not in our current sources. | |
| PolyLite Galaxy ASA | — | Nozzle temperature is not in our current sources. | |
| PrimaCreator ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| PrimaSelect ASA+ | — | Nozzle temperature is not in our current sources. | |
| Print With Smile ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Professional LAB ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Push Plastic ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| QIDI Tech ASA | Outside limits | The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. This printer cannot print this material at the recommended bed temperature. | |
| QIDI Tech ASA-Aero | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| ROSA3D Filaments ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| ROSA3D Filaments ASA 5Kevlar | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| ROSA3D Filaments ASA CF | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| ROSA3D Filaments ASA GF | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| SainSmart ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| SainSmart ASA CF | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| SainSmart Gt 3 ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Sakata 3D ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| SMART MATERIALS 3D ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| SMART MATERIALS 3D ASA GF | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| SmartPrint ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Spectrum ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Spectrum ASA 275 | — | Whether an enclosure is required is not in our current sources. | |
| Spectrum ASA CF | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Spectrum ASA Kevlar | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Spectrum ASA-X CF10 | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Spectrum ASA-X GF10 | Partial | The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 80 °C, is within that maximum. | |
| Spectrum X Gf10 GF ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Tectonic 3D Aura ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| TEQStone ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| The Filament ASA | — | Nozzle temperature is not in our current sources. | |
| The Filament ASA CF | — | Nozzle temperature is not in our current sources. | |
| TINMORRY ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Voxelab ASA-CF | — | Nozzle temperature is not in our current sources. | |
| Winkle ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Zyltech ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. | |
| Zyltech Matte ASA | Partial | The listed bed range reaches 110 °C, above this printer's maximum of 90 °C. This printer cannot reach the full recommended range. The low end, 90 °C, is within that maximum. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Anycubic Kobra 3 Max against 113 ASA products: 0 fit, 77 cannot reach the full recommended range, 12 cannot print this material at a recommended temperature, and 24 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare