Sovol SV08 Max
Sovol SV08 Max against 877 PLA products: 587 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 290 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Amolen Basic Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Basic Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Conductive PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Crystal Transparent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Dual Color Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Dual Color Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Galaxy Sparkle Shiny Galaxy Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Amolen High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Marble PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Amolen PLA Metal | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Quad Color Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Rainbow Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen S-Series Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Shiny Glitter Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Shiny Gradient Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Silk GF PLA | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Amolen Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Temperature Color Change PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Transparent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Triple Color Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Triple Color Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen UV Color Change PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen Wood PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic High-Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| Anycubic PLA Marble | — | Nozzle temperature is not in our current sources. | |
| Anycubic PLA Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic PLA Metal | — | Nozzle temperature is not in our current sources. | |
| Anycubic PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Anycubic PLA Silk Dual-Tricolor | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic PLA Special | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Aero | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Basic Gradient | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Galaxy | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Glow | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Bambu Lab PLA Lite | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Marble | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Metal | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Pure | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Silk Dual Color | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Silk Multi-Color | — | Nozzle temperature is not in our current sources. | |
| Bambu Lab PLA Silk+ | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Sparkle | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Tough+ | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Translucent | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA Wood | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab PLA-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Bambu Lab Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb Economy PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb LW-HT PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb PHA PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb r-Semi PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb Semi PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb StoneFill PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality CR-PLA Carbon | — | Nozzle temperature is not in our current sources. | |
| Creality Ender Fast PLA | — | Nozzle temperature is not in our current sources. | |
| Creality Hyper Luminous PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Hyper PLA | — | Nozzle temperature is not in our current sources. | |
| Creality Hyper PLA-CF | — | Nozzle temperature is not in our current sources. | |
| Creality Hyper Rainbow PLA | — | Nozzle temperature is not in our current sources. | |
| Creality PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Creality PLA CR-Wood | — | Nozzle temperature is not in our current sources. | |
| Creality Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Soleyin Ultra PLA | — | Bed temperature is not in our current sources. | |
| ELEGOO Galaxy PLA | — | Nozzle temperature is not in our current sources. | |
| ELEGOO PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Glow | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| ELEGOO PLA Marble | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA MATTE | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Metallic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA PRO | — | Nozzle temperature is not in our current sources. | |
| ELEGOO PLA Sparkle | — | Nozzle temperature is not in our current sources. | |
| ELEGOO PLA Wood | — | Nozzle temperature is not in our current sources. | |
| ELEGOO PLA-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| ELEGOO Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone PLA Burnt Titanium | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Burnt Titanium Dual-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Burnt Titanium Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Burnt Titanium Triple Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA High-Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Light Weight | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Luminous | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Marble | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte Dual-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte Gradient | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte High Speed | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte High Speed Gradient Multi-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte High Speed Rock Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte High Speed Triple-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Matte Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Metallic | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk High-Speed Dual-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk High-Speed Quadruple | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk High-Speed Triple-Color | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Silk Rainbow | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Ultra Silk | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA Wood | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA-CF | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D Dark Twinkling PLA Magic | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D Mystic Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D Peak PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| eSUN 3D PLA-Chameleon | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-HS | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Lite | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Luminous | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Luminous Rainbow | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-LW | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-Marble | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Metal | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Silk Candy | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Silk Magic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Silk Metal | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Silk Rainbow | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-ST | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA-Stars | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D PLA-Wood | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D UV Change PLA UV Color Change | — | Nozzle temperature is not in our current sources. | |
| extrudr Basic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr BioFusion PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr BioFusion Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr Flax PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr GreenTEC Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr GreenTEC PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr Pearl PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr PLA NX2 Matt | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr Wood PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fillamentum PLA Crystal Clear | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fillamentum PLA Extrafill | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Hatchbox Metallic Finish PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox PLA Basic | — | Nozzle temperature is not in our current sources. | |
| Hatchbox PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Hatchbox PLA Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox PLA Max | — | Nozzle temperature is not in our current sources. | |
| Hatchbox PLA Metal | — | Nozzle temperature is not in our current sources. | |
| Hatchbox PLA Pro | — | Nozzle temperature is not in our current sources. | |
| Hatchbox Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox Transparent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox UV Color Changing PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox Wood PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland Galaxy PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland PLA Basic | — | Nozzle temperature is not in our current sources. | |
| Inland PLA Chameleon | — | Nozzle temperature is not in our current sources. | |
| Inland Pla Glitter Rainbow | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland PLA Matte | — | Nozzle temperature is not in our current sources. | |
| Inland PLA Mystic Silk | — | Nozzle temperature is not in our current sources. | |
| Inland Pla Silk Rainbow | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| JAYO High Speed Matte PLA | — | Nozzle temperature is not in our current sources. | |
| JAYO Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| JAYO PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| JAYO Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Kingroon High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Kingroon Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Overture High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Air | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Overture PLA Cream | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Easy | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Easy Glow | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Overture PLA Professional | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Refill | — | Nozzle temperature is not in our current sources. | |
| Overture PLA Rock | — | Nozzle temperature is not in our current sources. | |
| Overture PLA Super | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Turbo Rapid | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Shimmer PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Creator Special Edition PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Draft PLA | — | Nozzle temperature is not in our current sources. | |
| Polymaker Dual Panchroma Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker For Production Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Polymaker Gradient Panchroma PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker HT PLA PRO | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker HT-PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker HT-PLA-GF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Polymaker LW PolyLite PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Metallic PolyLite PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Metallic Polylite Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Muted Panchroma Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Neon Panchroma PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Panchroma Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Polymaker Panchroma PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Panchroma Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PLA CF | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Polymaker PLA PolyCast | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polylite PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Polymaker Polymaker PLA Pro | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker PolyMax PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polysonic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Satin Panchroma PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Wood PLA | — | Nozzle temperature is not in our current sources. | |
| Protopasta Basic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Conductive PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Fiber HT Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Fluorescent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Glitter PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Protopasta High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Iron Metal Composite PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Marble PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Metal Composite PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Metallic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Multicolor PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Nebula PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Opaque PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Pearl PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Protopasta PLA Green Glow-in-the-Dark | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Protopasta Recycled PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Satin PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Stainless Steel Metal Composite PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Static Dissipative Carbon Fiber PLA | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Protopasta Static Dissipative PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Steel Metal Composite PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Still Colorful Recycled PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Thermochromic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta Translucent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament Blend Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament Mystic Premium PLA | — | Nozzle temperature is not in our current sources. | |
| Prusament PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament PLA Recycled | — | Nozzle temperature is not in our current sources. | |
| Prusament PLA Woodfill | — | Nozzle temperature is not in our current sources. | |
| Prusament rPLA | — | Nozzle temperature is not in our current sources. | |
| SUNLU APLA | — | Nozzle temperature is not in our current sources. | |
| SUNLU Fluorescent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| SUNLU High Speed Matte PLA | — | Nozzle temperature is not in our current sources. | |
| SUNLU High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU High Speed PLA Marble | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU PLA Carbon Fiber | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| SUNLU PLA Classic | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Glow In The Dark | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU PLA Matte Dual-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Rainbow | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU PLA Transparent Rainbow | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Twinkling | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA Wood | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA-Meta | — | Nozzle temperature is not in our current sources. | |
| SUNLU Real Wood Fiber PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Silk 2.0 | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Temperature Color Change PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Transparent Clear PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU Upgrade PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 123-3D 123-3D Filament PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 22 Network Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| 22 Network Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 22 Network PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 22 Network Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Prima Basic Recycle PLA | — | Nozzle temperature is not in our current sources. | |
| 3D Printing Canada Budget PLA | — | Nozzle temperature is not in our current sources. | |
| 3DE Premium | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DE Premium Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Marble | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Translucent | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA Wood | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DFOX PLA REFILL | — | Nozzle temperature is not in our current sources. | |
| 3DHoJor PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DHoJor PLA Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DHoJor Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE eco Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| 3DJAKE eco Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE eco PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE eco Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| 3DJAKE magic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE mystery PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DO PLA | — | Nozzle temperature is not in our current sources. | |
| 3DPower Basic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Dual Color Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower HT 150 PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Hyper Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Marble PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Pastel PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Select PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech EcoMax PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech Economy PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| 3DXTech PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PLA 3DXStat ESD | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Aceaddity Marble PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Silk Magic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Wood PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North E PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Add-North High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North HT-PLA Pro Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Matte High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Add-North PLA Economy | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PLA Matte Textura | — | Nozzle temperature is not in our current sources. | |
| Add-North PLA Premium Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North PLA Textura Flare | — | Nozzle temperature is not in our current sources. | |
| Add-North PLA Wood | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North rPLA RE-ADD | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North X-PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North X-PLA High Speed | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA Chameleon | — | Nozzle temperature is not in our current sources. | |
| Alzament PLA Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA-CF | — | Nozzle temperature is not in our current sources. | |
| AmazonBasics Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia PLA Dolos Color Shifting | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia PLA Galactic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Ambrosia PLA Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AmeLeis PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| American Filament Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| American Filament PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| American Filament Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Arianeplast Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Arianeplast PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Arianeplast PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Arianeplast Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Artillery Artillery Basic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART Flexible 89A PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ATARAXIA ART Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Atomic Filament PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Atomic Filament Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL L-EGO PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL Metallic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL PLA HT110 | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AURAPOL Wood PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm Glitter PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm Matte HS PLA | — | Nozzle temperature is not in our current sources. | |
| AzureFilm PLA | — | Nozzle temperature is not in our current sources. | |
| AzureFilm PLA Original | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm PLA Prime | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm Silk PLA | — | Nozzle temperature is not in our current sources. | |
| AzureFilm Wood PLA | — | Nozzle temperature is not in our current sources. | |
| BIQU PLA GO | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Buddy3D PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Buddy3D Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D Dual Color Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D PLA Max | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| COEX 3D PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D PLA VO3D High Impact | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad PLA Mermaid (purple | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad PLA Mermaid Fast Change (purple | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad PLA Unicorn Fast Change (purple | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Copymaster PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dancyn 3D Prints PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dancyn 3D Prints PLA Metal Series | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Das Filament Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament PLA Toms3D | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Devil Design PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Df PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Digilab Eco PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Digilab PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| DuramiC 3D PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EasyPrint PLA | — | Nozzle temperature is not in our current sources. | |
| EconoFil Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| EconoFil Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EconoFil PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EconoFil Standard PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EconoFil Standard Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Ingeo 850 PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Ingeo 870 PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX Luminous High Speed Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| EPAX Matte High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Fluorescent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Iridescent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Metallic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Pearl PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS Silver Glitter PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EUMAKERS UV Reactive Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Fiberlogy Easy PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Fibersilk Metallic Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy HD PLA | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy HS Clear High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Impact PLA | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PLA FiberSatin | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PLA FiberSilk | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy PLA FiberWood | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy PLA Mineral | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy R PLA | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy Refill Easy PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Refill R PLA | — | Nozzle temperature is not in our current sources. | |
| FiberThree F3 GF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| FiberThree PLA GF | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| FilaCube PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilaCube PLA Greenery | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentive PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Army Edition PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Crystal Clear PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Extrafill PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| FilamentPM MarbleJet PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Pastel Edition PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Pearl PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Skin Edition PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Timberfill PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentree Blaster PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentree PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentree PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Filamentree Plus PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentworld Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentworld PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filamentworld Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filatech PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Filkemp PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Gradient Rapid Chameleon PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| FLASHFORGE Rapid Chameleon PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Rapid Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| FLASHFORGE Rapid PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FLASHFORGE Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Bulk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil e Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil ePLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura EasyFil PLA - Glow in the Dark | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| FormFutura EasyFil PLA - Glow in the Dark | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| FormFutura EasyWood | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Galaxy PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura High Gloss PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura High Precision PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura MetalFil PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Premium PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura ReForm r PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura StoneFil PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Volcano Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Francofil PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech Luminous Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Geeetech Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Geeetech PLA Marble | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech PLA Wood | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GIANTARM Glow in the Dark PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| GIANTARM PLA Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Color Change PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Fluorescent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Glitter Sparkle PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Gizmo Dorks PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks Thermochromic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hobby Lobby Candyblack/Silver | — | Bed temperature is not in our current sources. | |
| Hobby Lobby PLA | — | Bed temperature is not in our current sources. | |
| Hobby Lobby PLA Silk | — | Bed temperature is not in our current sources. | |
| IC3D Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IC3D PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI CF-PLA | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| IEMAI PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IIID MAX PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Insignia PLA | — | Nozzle temperature is not in our current sources. | |
| Insignia Silk_PLA | — | Nozzle temperature is not in our current sources. | |
| Inslogic High Speed Marble PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic High Speed PLA Pro | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic Multicolor Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic PLA CF15 | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Inslogic PLA Pro | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic WoodFill PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSANMATE iSANMATE Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iSANMATE iSANMATE violet | — | Nozzle temperature is not in our current sources. | |
| Jessie PLA Premium Elixir | — | Nozzle temperature is not in our current sources. | |
| Jessie Premium PLA | — | Nozzle temperature is not in our current sources. | |
| Jessie Premium PLA Glitter | — | Nozzle temperature is not in our current sources. | |
| KiwiFil PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PLA "Sparkly Green Ocean" | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PLA Rainbow "Sparkly Green Ocean" | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PLA Rainbow "Sparkly Purple Galaxy" | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil PLA Rustic Rainbow | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| KiwiFil Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| L3D PLA Basic | — | Nozzle temperature is not in our current sources. | |
| L3D PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Landu PLA Metal | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Landu PLA Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LayerWorks Solutions LayerWorks WORKS series | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LOCYFENS Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| LOVOON Silk Magic Color | — | Bed temperature is not in our current sources. | |
| MarsWork PLA Basic | — | Nozzle temperature is not in our current sources. | |
| MarsWork PLA Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc Glitter Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc Performance PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Matter3D Inc PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| MatterHackers Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| MatterHackers PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| MatterHackers Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Mika3D Silk | — | Nozzle temperature is not in our current sources. | |
| Mosaic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nebula PLA Art Glitter | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Art Glowing | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Art Marble | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Art Mystic Green | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Art Thermo | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Premium | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Premium Silk | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Tech 607 | — | Nozzle temperature is not in our current sources. | |
| Nebula PLA Tech 609 HD | — | Nozzle temperature is not in our current sources. | |
| Nexaforge PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Nobufil PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Numakers Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Numakers PETG HS | — | Nozzle temperature is not in our current sources. | |
| Numakers PLA Marble | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Numakers PLA Wood | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Numakers PLA-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Numakers Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| OVV3D Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| OVV3D PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| OVV3D Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Panchroma Basic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Panchroma Celestial PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Dual Matte PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Dual Silk PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Dual Special PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Galaxy PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Glow PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Gradient Galaxy | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Panchroma Gradient Matte PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Gradient Satin PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Gradient Translucent PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Luminous PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Marble PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Panchroma Metallic PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Neon PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Panchroma Satin PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Starlight PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Temp Shift PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma Translucent PLA | — | Nozzle temperature is not in our current sources. | |
| Panchroma UV Shift PLA | — | Nozzle temperature is not in our current sources. | |
| Paramount 3D Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D PLA Flex | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Patron EG Marble PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Patron EG Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Phrozen PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PolyLite CosPLA Version A | — | Nozzle temperature is not in our current sources. | |
| PolyLite CosPLA Version B | — | Nozzle temperature is not in our current sources. | |
| PolyLite LW-PLA | — | Nozzle temperature is not in our current sources. | |
| PolyLite Metallic PLA Pro | — | Nozzle temperature is not in our current sources. | |
| PolyLite PLA | — | Nozzle temperature is not in our current sources. | |
| PolyLite PLA Pro | — | Nozzle temperature is not in our current sources. | |
| PolyLite PLA-CF | — | Nozzle temperature is not in our current sources. | |
| PolySonic PLA | — | Nozzle temperature is not in our current sources. | |
| PolySonic PLA Pro | — | Nozzle temperature is not in our current sources. | |
| Precision 3D Filament Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Precision 3D Filament PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Easyprint Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Easyprint PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Flame Retardant PrimaSelect PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Gradient PrimaSelect PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Marble PrimaSelect PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Metal Shine PrimaSelect PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Metal Shine Primaselect Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Pastel PrimaSelect PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator PLA CF | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| PrimaCreator Primaselect Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| PrimaCreator Primavalue High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primavalue Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primavalue PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Satin PrimaSelect PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Sparkle PrimaSelect PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaSelect PLA | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA Glossy | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA Matt | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA METAL | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA PRO | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA Satin | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect PLA Wood | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect Tough PLA | — | Nozzle temperature is not in our current sources. | |
| PrimaValue PLA | — | Nozzle temperature is not in our current sources. | |
| Print With Smile PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Print With Smile PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Print With Smile Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Bicolor Magic Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Elixir Jessie Premium Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| PrintedSolid Gradient Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Jessie Premium PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| PrintedSolid Rainbow Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Shiny Gradient Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid TriColor Magic Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB HS-PLA | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Glow | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Marble | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Matte | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Meta | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Pastel | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB PLA Silk | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Silk Dual | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Silk Tri | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA Wood | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA-CF | — | Nozzle temperature is not in our current sources. | |
| Prografen PLA Graphene Light | — | Nozzle temperature is not in our current sources. | |
| Prografen PLA Graphene Strong | — | Nozzle temperature is not in our current sources. | |
| Push Plastic High Heat PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Matte Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Matte Rapido | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Metal Rapido | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Rapido | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Silk Rapido | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA Wood | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech PLA-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Recreus PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| RecyclingFabrik Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| RecyclingFabrik PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| RecyclingFabrik Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Galaxy PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| ROSA3D Filaments LW AERO PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Magic PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Magic Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Matte PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| ROSA3D Filaments Multicolour Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Pastel PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| ROSA3D Filaments PLA Starter Neon Green Glow in the Dark | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| ROSA3D Filaments Plus ProSpeed Impact PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Rainbow Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ReFill PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ReFill Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Speed Matt Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Starter PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Glossy Gt 3 Silk High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart High Flowability Flexible Gt 3 PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Lite Gt 3 High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D Go&Print PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D HR-870 PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PLA 700 | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PLA 850 | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D PLA Silk 850 | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Sakata 3D Wood PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siddament Siddament | — | Nozzle temperature is not in our current sources. | |
| Slic3D PLA Basic | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Crystal PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| SMART MATERIALS 3D Neon PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Pastel PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA 3D850 | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA 3D870 | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA EP Easy Print | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D PLA Iris | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Recycled PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Wood PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SmartPrint HS-PLA | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Galaxy | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Glow | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Marble | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Matte | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Meta | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Silk | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Silk Dual | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Silk Tri | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA Wood | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA-CF | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Basic PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Breakaway Support for PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Glow-in-the-dark PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Matte PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker PLA Full Spectrum | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Snapmaker PLA-CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Snapmaker Silk Dual-Color PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Silk PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker SnapSpeed PLA | — | Nozzle temperature is not in our current sources. | |
| Snapmaker Wood PLA | — | Nozzle temperature is not in our current sources. | |
| SOVB 3D Fil PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Crystal Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum FlameGuard PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum FlameGuard Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Glitter Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Spectrum High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Huracan PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Huracan Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum LW-PLA UltraFoam | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Metal Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Pastello PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA AquaPrint | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Carbon | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Spectrum PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Spectrum PLA Crystal | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Electrically Conductive | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Glitter | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Glow in the Dark | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Spectrum PLA GreenyHT | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA GreenyPro | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Magic SILK | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA MATT | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Metal | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Nature | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Premium | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Premium HighSpeed | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA SILK | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA SILK Rainbow | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Thermoactive | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA Tough | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum PLA WOOD | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum R PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum SafeGuard PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum Stone Age PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| StrongHero3D N2 N3 Multi Color | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TECBEARS Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| TECBEARS PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TECBEARS Plus High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TECBEARS Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Tectonic 3D Aura PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| TEQStone Marble PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| TEQStone Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament HT-PLA | — | Nozzle temperature is not in our current sources. | |
| The Filament PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament PLA CF | — | Nozzle temperature is not in our current sources. | |
| The Filament PLA HS | — | Nozzle temperature is not in our current sources. | |
| The Filament PLA Lite | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament PLA Matte | — | Nozzle temperature is not in our current sources. | |
| TINMORRY Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| TINMORRY Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| TINMORRY Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| UniTak3D PLA Matte | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Verbatim PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Voxel PLA PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Winkle HD PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle High Speed PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle PLA UL94 V0 | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Winkle Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| XZN Gradient PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN Marble PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| XZN Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN Transparent PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ZIRO 3D Fluorescence PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ZIRO 3D Glitter Diamond PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ZIRO 3D Gradiant Matte PLA | — | Bed temperature is not in our current sources. | |
| ZIRO 3D Gradient Color PLA Silk | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ZIRO 3D Gradient Twinkling PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Glow PLA | — | This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. | |
| Zyltech Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech PLA CF | — | This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. | |
| Zyltech Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Texas Twister Series Multi Color Matte PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Texas Twister Series Multi Color PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech Texas Twister Series Multi Color Silk PLA | Fits | SV08 Max can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Sovol SV08 Max against 877 PLA products: 587 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 290 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare