Anycubic Kobra 3 Max
Anycubic Kobra 3 Max against 295 PETG products: 240 are within the published limits, 3 exceed a published limit, and 52 cannot be judged because a temperature or printer limit was not published. Checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Amolen PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Anycubic PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Anycubic Translucent PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab PETG Basic | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab PETG HF | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab PETG Matte | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab PETG Translucent | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Bambu Lab PETG-CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| colorFabb PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Creality CR-PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Creality Hyper PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Creality PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Creality Soleyin Basic PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ELEGOO PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ELEGOO PETG PRO | Fits | The listed nozzle maximum of 235 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ELEGOO PETG Translucent | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ELEGOO PETG-CF | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ELEGOO PETG-GF | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| ELEGOO RAPID PETG | Fits | The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Eryone PETG-CF | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| eSUN 3D ESUN PETG Matte | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| eSUN 3D PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| eSUN 3D PETG-Basic | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| eSUN 3D PETG-Matte | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| eSUN 3D PETG+CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| eSUN 3D PETG+HS | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| eSUN 3D Silk PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| extrudr Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| extrudr PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Hatchbox PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Inland PETG+ | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| JAYO PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Kingroon High Speed PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Kingroon PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Kingroon PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Overture High Speed PETG Refill | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Overture PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Overture PETG Basic | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Overture PETG Refill | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polymaker PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polymaker PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Polymaker Polylite PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polymaker Polymax PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Protopasta Glitter PETG | Fits | The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Protopasta Metallic PETG | Fits | The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Protopasta PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Protopasta PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Protopasta Recycled PETG | Fits | The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Protopasta Silk PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Protopasta Simply PETG | Fits | The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Protopasta Static Dissipative PETG | Fits | The listed nozzle maximum of 225 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Protopasta Translucent PETG | Fits | The listed nozzle maximum of 220 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Prusament Matte PETG | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Prusament PETG | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Prusament PETG CF | Outside limits | The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Prusament PETG Magnetite | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Prusament PETG Tungsten | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Prusament PETG V0 | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Siraya Tech Fibreheart PETG-CF Pro | Fits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| SUNLU Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SUNLU High Speed Matte PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SUNLU High Speed PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SUNLU Luminous Glow In The Dark PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SUNLU Matte PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| SUNLU PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SUNLU PETG 2.0 | Fits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SUNLU PETG Carbon Fiber | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| SUNLU PETG Glow In The Dark Filament | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3D Fuel Pro PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3D Printing Canada Budget PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DE Premium | Fits | The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DEA PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DEA PETG Translucent | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DJAKE Easy Matte PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DJAKE easy PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DJAKE Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DJAKE PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DO PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DPower Basic PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DPower Hyper Speed PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DPower PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DPower Select PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech PETG 3DXStat EMI | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech PETG 3DXStat ESD | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| 3DXTech PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Add-North ESD PETG | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Add-North Matte PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Add-North PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Add-North PETG Economy | Fits | The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Add-North PETG Flame Retardant V0 | Fits | The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Add-North PETG Koltron G1 | Fits | The listed nozzle maximum of 295 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Add-North PETG PRO Matte | Fits | The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Add-North PETG Rigid X | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Add-North rPETG Matte | Fits | The listed nozzle maximum of 245 °C is within this printer's maximum of 300 °C. The listed bed maximum of 70 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Alzament PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Alzament PETG Hyper | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Alzament PETG-CF | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Ambrosia PETG | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ATARAXIA ART PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Atomic Filament PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Atomic Filament PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| AURAPOL ARMY PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| AURAPOL PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| AzureFilm PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Buddy3D PETG | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| CC3D Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| CC3D PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| CC3D PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| CHCKX PETG | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Cookiecad PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Dancyn 3D Prints PETG HF | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Das Filament PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Devil Design Galaxy PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Devil Design PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Dremel Digilab PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Dremel PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| EasyPrint PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| EconoFil PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| EconoFil PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Eolas Prints PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| EPAX High Speed PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy Easy PET-G | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy Easy PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy Matt PET G Matte PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy PET-G | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy PET-G ESD | Fits | The listed nozzle maximum of 265 °C is within this printer's maximum of 300 °C. The listed bed maximum of 85 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy PET-G V0 PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberlogy PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Fiberlogy Refill Easy PET-G | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberon PETG-ESD | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Fiberon PETG-rCF08 | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FilamentPM ESD PETG | Fits | The listed nozzle maximum of 290 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FilamentPM PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FilamentPM PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| FilamentPM Silk PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Filamentree PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Filamentree PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Filamentworld Metallic Silk PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Filamentworld PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Filkemp PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FLASHFORGE Chameleon PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FLASHFORGE High Speed PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FLASHFORGE Metallic Rapid Silk PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FLASHFORGE PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FLASHFORGE PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| FLASHFORGE Rapid PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FLASHFORGE Silk PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura Bulk PETG | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura CarbonFil | Fits | The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura CarbonFil CF03 | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| FormFutura EasyFil ePETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura Hdglass | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura PETG CarbonFil | Fits | The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| FormFutura PETG Hdglass | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura Premium PETG Flame Retardant | Fits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| FormFutura ReFill PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Francofil PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Francofil PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Geeetech PETG | Fits | The listed nozzle maximum of 240 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Gizmo Dorks PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| GST3D PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| GST3D PETG translucent | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| GST3D PETG-CF | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| iBOSS 3D Light Gray | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| IC3D PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| IC3D PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| IC3D Recycled Matte PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| IEMAI CF-PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| IEMAI PETG | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Insignia PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Inslogic PETG CF10 | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Inslogic PETG Pro | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| iSangHu High Speed Translucent PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| iSANMATE PETG Clear Glitter | Fits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| iSANMATE pink | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Kimya PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| KiwiFil PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| KiwiFil PETG Rainbow "Dark Green Ocean" | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| KiwiFil PETG Rainbow "Dark Purple Galaxy" | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| L3D PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Matter3D Inc Matte PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Matter3D Inc PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Matter3D Inc PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| MatterHackers PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nebula PETG Art Chameleon | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nebula PETG Premium | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil Matte PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Nobufil PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Paramount 3D PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Paramount 3D PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Patron EG PETG HS | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Polar Filament PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PolyLite PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PolyLite Translucent PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator Easyprint PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator Primaselect PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaCreator Primavalue PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaSelect PETG CARBON | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrimaSelect Solid PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Print With Smile Bicolor Metallic PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Print With Smile PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Print With Smile PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Print With Smile RE PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrintedSolid Jessie Premium PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrintedSolid PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| PrintedSolid PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Professional LAB PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Professional LAB PETG Matte | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 85 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Professional LAB PETG Transparent | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Professional LAB PETG-CF | Fits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Prografen PETG Graphene Light | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Prografen PETG Graphene Strong | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Proteor Print PETG | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Push Plastic PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Push Plastic PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| QIDI Tech PETG Basic | Fits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| QIDI Tech PETG Rapido | Fits | The listed nozzle maximum of 275 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| QIDI Tech PETG Translucent | Fits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| QIDI Tech PETG-CF | Fits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| QIDI Tech PETG-GF | Fits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| QIDI Tech PETG-Tough | Fits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Recreus PET G Hf High Speed PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Recreus PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Recreus PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| RecyclingFabrik PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Renkforce PETG | Fits | The listed nozzle maximum of 270 °C is within this printer's maximum of 300 °C. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments High Speed Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments High Speed PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments Matte PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| ROSA3D Filaments Pet G Galaxy Hs PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments Pet G Hs PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments Pet G Structure Hs PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments PET-G MDT | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments PET-G Standard Neon Green Glow in the Dark | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| ROSA3D Filaments PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| SainSmart Glossy Gt 3 Silk High Speed PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SainSmart Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SainSmart PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SainSmart PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| SainSmart Silk PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Sakata 3D PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Sakata 3D PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Slic3D PETG Basic | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SMART MATERIALS 3D PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SMART MATERIALS 3D PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| SmartPrint PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| SmartPrint PETG Transparent | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Snapmaker PETG | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Snapmaker PETG HF | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PET G Matt Matte PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PET-G FR V0 PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PET-G Glitter PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PET-G Premium PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG Carbon | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| Spectrum PETG FR V0 | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG FX120 | Fits | The listed nozzle maximum of 260 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG Glitter | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG Glow in the Dark | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG HT100 | Outside limits | The listed nozzle maximum of 280 °C is within this printer's maximum of 300 °C. The listed bed temperature starts at 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG MATT | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG Premium | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PETG Premium High Speed | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum PTFE | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Spectrum R PETG | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TECBEARS Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TECBEARS PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Tectonic 3D Aura PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TEQStone PETG | Outside limits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 100 °C, above this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| The Filament PETG | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 75 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| The Filament PETG CF | — | Nozzle temperature is not listed for this filament. Bed temperature is not listed for this filament. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| The Filament PETG Lite | Fits | The listed nozzle maximum of 255 °C is within this printer's maximum of 300 °C. The listed bed maximum of 60 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TINMORRY Frosted GF PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| TINMORRY Galaxy PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TINMORRY Glow PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TINMORRY Marble PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TINMORRY Metallic PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TINMORRY PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| TINMORRY PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| TINMORRY Rapid-Eco PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Verbatim PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Voxel PLA PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Winkle PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Winkle PETG CF | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is recorded for this filament. Whether the stock nozzle is hardened is not listed for this printer. | |
| XZN PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 80 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. | |
| Zyltech PETG | Fits | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament. |
As an Amazon Associate we earn from qualifying purchases.
Anycubic Kobra 3 Max against 295 PETG products: 240 are within the published limits, 3 exceed a published limit, and 52 cannot be judged because a temperature or printer limit was not published. Checked 14 October 2026.
The filament's listed nozzle and bed maxima do not exceed the printer's listed maxima, and no recorded enclosure or hardened-nozzle requirement conflicts with the printer. Missing fields are not treated as a pass.
0 in the tray
Compare