Atomic Filament PETG
Search Amazon
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–250 °C
- Bed70–90 °C
- Speed—
- Dry—
- Density1.27 g/cm³
Atomic Filament PETG, from the Open Filament Database. A blank stays blank.
Nozzle220–250 °C
Bed70–90 °C
Printers
Fits means nozzle, bed, and enclosure all pass. Partial means the full recommended range is out of reach. A missing essential check is not a fit.
- A1Not enough data
- A1 miniBed range only partly in reach
- P1PNot enough data
- P1SNot enough data
- X1CNot enough data
- MK4SNot enough data
- Core One+Not enough data
- XLNot enough data
- K1CNot enough data
- CentauriNot enough data
- Kobra 3 MaxNot enough data
- Q1 ProNot enough data
- SV08 MaxNot enough data
Colors
- Amethyst Violet Gemstone Translucent v2#B1407F
- Aqua Translucent#36DBE7
- Baby Blue v2#5FBCDD
- Black Marble#000000
- Bright White Opaque#FFFFFF
- Bronze Metallic#000000
- Bug Eyes Shade-Shifting#214327
- Candy Apple Golden Pearl#98282F
- Chameleon Coastline Shade-Shifting#488D94
- Cosmic Graphite v2#26272B
- Crystal Clear / Natural#E4E7E5
- Dark Cherry Red#520B0F
- Deep Black Opaque#000000
- Emerald Green Translucent#34695A
- Extreme JET Black#000000
- Galactic Blue Translucent Iridescent#565670
- Galactic Purple Translucent Iridescent#A2918D
- Gemstone Ruby Red Translucent#E20010
- Golden Blood Diamond Translucent#C01616
- Gray#55555E
- Gun Metal Gray Opaque#26272B
- Hot Pink Opaque#E23288
- Indigo Golden Sparkle v3 Translucent#6C47B2
- Iridescent Bubblegum#FF72B6
- Kandy Blast#F14147
- Khaki#938E6D
- Light Gray#C5C7C4
- Majestic Brown#503529
- Marble v2#C3CCD5
- Metallic Silver v2#ABACB0
- Minty Green#ADEBB3
- Mysterious Abyss v2 Pearl#363C32
- Navy Blue#3A0A8C
- Neon Green UV Reactive Opaque#00CC00
- Neon Orange UV Reactive Opaque#FF5F2E
- Neon Yellow UV Reactive Opaque#FFFB00
- Olive Drab Green#606935
- Pastel Lilac#6C5BB1
- Pearlescent Blue Opaque#2C3294
- Pearlescent Translucent Neon Green V2#58C91B
- Perfect Blue Opaque#0E21AE
- Perfect Orange Opaque#FF5F2E
- Perfect Purple#8846AE
- Perfect Red Opaque#E20010
- Perfect Yellow#FBE200
- Pine Green v2#214327
- RepRap Green#317C2E
- Rose Gold Metallic Translucent#D48DBD
- Royal Blue Opaque#4921C1
- Starlight Gray#26272B
- Starry Night Translucent v3#09048E
- Too Good to be Blue Shade-Shifting#23668C
- Translucent Bright Orange#F67405
- Translucent Fluorescent Neon Green#7FE200
- Translucent Neon Hot Pink - UV REACTIVE#ED1536
- Translucent Neon Yellow - UV Reactive#E4FF33
- Translucent Sapphire Blue#0022FF
- Translucent Smoke Black#000000
- Tropical Sea Iridescent Translucent#00B4BC
- True Gold v2#CE8D00
- Turquoise#15817B
Related
Answers
- What filament is waterproof?
- What is the best filament for outdoor use?
- Do I need to dry filament, and how?
Sources & notes
Atomic Filament PETG (PETG) has a recommended nozzle temperature of 220–250 °C and a recommended bed temperature of 70–90 °C, according to the Open Filament Database (record https://api.openfilamentdatabase.org/api/v1/brands/atomic_filament/materials/PETG/filaments/petg/index.json; dataset imported 2026-10-13).
Dataset imported 13 October 2026.
Source · Brand site · Page JSON
Full specifications
| Material | PETG |
|---|---|
| Nozzle temperature | 220–250 °C |
| Bed temperature | 70–90 °C |
| Print speed | — |
| Volumetric flow | — |
| Drying | — |
| Enclosure required | — |
| Chamber temperature | — |
| Hardened nozzle | — |
| Spool weight | 1 kg (1000 g) |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.02 mmRecorded by the Open Filament Database. It is a required field there, including conventional values. |
| Recorded density | 1.27 g/cm³Recorded by the Open Filament Database. It is a required field there, including conventional values. |
| Minimum nozzle diameter | — |
| Shore A hardness | — |
| Certifications | — |
| Price per kg | — |
| Dataset imported | 13 October 2026Open Filament Database generation date, not a lab test. |
A blank was blank in the source. Nothing here is estimated.
Printer notes
| Printer | Result | Why |
|---|---|---|
| Bambu Lab A1 | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab A1 mini | Partial | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed range reaches 90 °C, above this printer's maximum of 80 °C. This printer cannot reach the full recommended range. The low end, 70 °C, is within that maximum. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1P | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab P1S | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Bambu Lab X1 Carbon | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 110 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa MK4S | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa CORE One+ | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Prusa XL | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 290 °C. The listed bed maximum of 90 °C is within this printer's maximum of 120 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Creality K1C | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Elegoo Centauri Carbon | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 320 °C. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Anycubic Kobra 3 Max | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 90 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Qidi Q1 Pro | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
| Sovol SV08 Max | — | The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C. The listed bed maximum of 90 °C is within this printer's maximum of 100 °C. Whether an enclosure is required is not in our current sources. A hardened nozzle is not recorded for this filament. |
Questions
What nozzle temperature does Atomic Filament PETG recommend?
Atomic Filament PETG lists a recommended nozzle temperature of 220–250 °C.
What bed temperature does Atomic Filament PETG recommend?
Atomic Filament PETG lists a recommended bed temperature of 70–90 °C.
What print speed does Atomic Filament PETG list?
Print speed and volumetric flow are not in our current sources in the imported sources.
Does Atomic Filament PETG require an enclosure?
An enclosure requirement is not in our current sources. No chamber temperature is listed either.
Does Atomic Filament PETG require a hardened nozzle?
A hardened-nozzle requirement is not in our current sources.
How should Atomic Filament PETG be dried?
Drying temperature and drying time for Atomic Filament PETG are not in our current sources.
What spool weights does Atomic Filament PETG come in?
Listed spool weights: 1 kg (1000 g).
What is the price per kilogram of Atomic Filament PETG?
Price per kilogram is not in our current sources.
Provenance
Open Filament Database
License MIT. Record. Repository. Fields: bedTempC, brand, colors, densityGCm3, diameterToleranceMm, diametersMm, material, nozzleTempC, product, spoolWeightsG.