Anycubic PETG-CF
Published . Updated .
Print settings for Anycubic PETG-CF, copied from the maker's data.
Commission on these links. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 240–270 °C (464–518 °F).
- Bed: 65–70 °C (149–158 °F).
- Print speed: 40–250 mm/s.
- Use a hardened nozzle.
The maker did not list an enclosure.
Will it work on a printer?
Yes, it works means the nozzle, the bed, and an enclosure all clear that printer. Works with a caveat means the full recommended range is out of reach. A missing essential check is not a yes.
Works on 9 of 23 printers we track.
Colors
- Syrup Brown#99403A
- Indigo Blue#0E4174
- Titanium Grey#545358
- Black#2D2926
Related
Where these numbers come from
Anycubic PETG-CF (PETG) lists 240–270 °C (464–518 °F) nozzle and 65–70 °C (149–158 °F) bed, from the Anycubic product page (https://store.anycubic.com/products/petg-cf-filament), checked 2026-10-26. The same check lists print speed 40–250 mm/s, drying 60–65 °C (140–149 °F) for 6–8 h, volumetric flow up to 11 mm³/s, a hardened nozzle is required, listed price $25.99, not stored as a price per kilogram.
Manufacturer page checked 26 October 2026. This record is not from the Open Filament Database. Manufacturer page checked 26 October 2026.
Listed price $25.99 on the product page. Not recorded as a price per kilogram.
Full specifications
| Material | PETG |
|---|---|
| Nozzle temperature | 240–270 °C (464–518 °F) |
| Bed temperature | 65–70 °C (149–158 °F) |
| Print speed | 40–250 mm/s |
| Volumetric flow | up to 11 mm³/s |
| Drying | 60–65 °C (140–149 °F) for 6–8 h |
| Enclosure required | Not listed by the maker |
| Chamber temperature | Not listed by the maker |
| Hardened nozzle | YesThe product page says a hardened nozzle is required. |
| Spool weight | Not listed by the maker |
| Diameter | Not listed by the maker |
| Diameter tolerance | Not listed by the maker |
| Recorded density | 1.32 g/cm³ |
| Minimum nozzle diameter | 0.4 mm |
| Shore A hardness | Not listed by the maker |
| Certifications | Not listed by the maker |
| Price per kg | Not listed by the maker |
| Manufacturer page checked | 26 October 2026Anycubic product page |
Not listed by the maker means the source did not publish that figure.
Provenance
Anycubic product page
License Manufacturer product page. Record. Repository. Fields: nozzleTempC, bedTempC, speeds.printMmS, speeds.volumetricMm3S, drying, densityGCm3, minNozzleDiameterMm, hardenedNozzle, colors.