Data
PETG drying temperature and time
Dry PETG at 55–70 °C (131–158 °F) for 3–10 hours; median 62.5 °C (145 °F) across 28 official tables.
That sentence is the span and the median of the tables below, not a new setpoint. Use the product row when the maker lists one temperature.
Softens at (HDT): 68.6–78 °C (155–172 °F) at 0.45 MPa; 65–75 °C (149–167 °F) at 1.8 MPa; 69–77 °C (156–171 °F), load not stated. Heat resistance dataset.
Full drying dataset · CSV · JSON · Latest row checked 26 October 2026.
| Brand | Product | Drying temperature | Drying time | Source | Checked |
|---|---|---|---|---|---|
| Anycubic | Anycubic PETG | 55–65 °C (131–149 °F) | 6–8 h | Anycubic PETG technical data sheet (v3.0) | 2026-10-18 |
| Anycubic | PETG-CF | 60–65 °C (140–149 °F) | 6–8 h | Anycubic PETG-CF product page | 2026-10-26 |
| Bambu Lab | Bambu PETG HF | 65 °C (149 °F) | 8 h | Bambu Lab PETG HF technical data sheet | 2026-10-18 |
| Bambu Lab | Bambu PETG Matte | 65 °C (149 °F) | 8 h | Bambu Lab PETG Matte technical data sheet | 2026-10-18 |
| Bambu Lab | Bambu PETG Translucent | 65 °C (149 °F) | 8 h | Bambu Lab PETG Translucent technical data sheet | 2026-10-18 |
| Bambu Lab | Bambu PETG-CF | 65 °C (149 °F) | 8 h | Bambu Lab PETG-CF technical data sheet | 2026-10-18 |
| Creality | Creality PETG (general guidance) | 65 °C (149 °F) | 8 h | Creality Wiki: Filament Pre-Printing Guide: Drying | 2026-10-18 |
| Dancyn 3D Prints | PETG HF | 65 °C (149 °F) | 6–8 h | Dancyn PETG HF product page | 2026-10-26 |
| ELEGOO | ELEGOO PETG Glitter | 60 °C (140 °F) | 8 h | ELEGOO US store: PETG Glitter | 2026-10-18 |
| ELEGOO | ELEGOO PETG HF | 60 °C (140 °F) | 8 h | ELEGOO US store: PETG HF | 2026-10-18 |
| ELEGOO | ELEGOO PETG Pro | 60 °C (140 °F) | 8 h | ELEGOO US store: PETG Pro | 2026-10-18 |
| ELEGOO | ELEGOO PETG series (general guidance) | 55–65 °C (131–149 °F) | 8–10 h | ELEGOO Wiki: FDM filament drying and storage guide | 2026-10-18 |
| ELEGOO | ELEGOO PETG Translucent | 60 °C (140 °F) | 8 h | ELEGOO US store: PETG Translucent | 2026-10-18 |
| ELEGOO | ELEGOO PETG-CF | 60 °C (140 °F) | 8 h | ELEGOO US store: PETG-CF | 2026-10-18 |
| ELEGOO | ELEGOO Rapid PETG | 60 °C (140 °F) | 8 h | ELEGOO US store: Rapid PETG | 2026-10-18 |
| eSUN | eSUN PETG | 60 °C (140 °F) | more than 8 h | eSUN product page: PETG | 2026-10-18 |
| eSUN | eSUN PETG+ | 60 °C (140 °F) | more than 8 h | eSUN product page: PETG+ | 2026-10-18 |
| Flashforge | Flashforge PETG | 70 °C (158 °F) | 6 h | Drying Temperature and Time | Flashforge Wiki | 2026-10-24 |
| Flashforge | Flashforge PETG-CF | 70 °C (158 °F) | 8 h | Drying Temperature and Time | Flashforge Wiki | 2026-10-24 |
| Overture | Overture PETG series | 65 °C (149 °F) | 7 h | Overture Filament Drying Guide | 2026-10-18 |
| Polymaker | Fiberon PETG-ESD | 65 °C (149 °F) | 3 h | Fiberon PETG-ESD TDS V1.1 | 2026-10-21 |
| Polymaker | Fiberon PETG-rCF08 | 65 °C (149 °F) | 3 h | Fiberon PETG-rCF08 TDS V1.0 | 2026-10-21 |
| Polymaker | PolyLite PETG | 65 °C (149 °F) | 6 h | PolyLite PETG technical data sheet | 2026-10-18 |
| Polymaker | PolyLite Translucent PETG | 65 °C (149 °F) | only if the material has absorbed moisture | PolyLite Translucent PETG — See-Through Filament – Polymaker | 2026-10-20 |
| Polymaker | Polymaker PETG | 55 °C (131 °F) | 6 h | Polymaker PETG TDS V2.0 (2025-11-17) | 2026-10-21 |
| Polymaker | PolyMax PETG | 65 °C (149 °F) | 6 h | PolyMax PETG technical data sheet | 2026-10-18 |
| Prusament | Prusament PETG (all versions) | 55 °C (131 °F) | 6 h | Prusa Knowledge Base: Drying filament | 2026-10-18 |
| QIDI Tech | QIDI PETG Basic | 60–65 °C (140–149 °F) | 6–8 h | PETG Filament for 3D Printing | Strong, Low-Warp – QIDI US Store | 2026-10-20 |
| QIDI Tech | QIDI PETG Rapido | 60–65 °C (140–149 °F) | 5–8 h | PETG Rapido Filament | High-Speed PETG 300mm/s – QIDI US Store | 2026-10-20 |
| QIDI Tech | QIDI PETG Translucent | 55–65 °C (131–149 °F) | 4–6 h | Translucent PETG Filament | Fast, UV-Resistant 1kg – QIDI US Store | 2026-10-20 |
| QIDI Tech | QIDI PETG-CF | 65 °C (149 °F) | 5–8 h | PETG-CF Carbon Fiber Filament | High Strength Matte PETG – QIDI US Store | 2026-10-20 |
| QIDI Tech | QIDI PETG-GF | 65 °C (149 °F) | 5–8 h | PETG-GF Reinforced PETG Filament | Matte, High-Strength – QIDI US Store | 2026-10-20 |
| Siraya Tech | Siraya Tech Fibreheart PETG-CF Pro | 70–80 °C (158–176 °F) | 4–6 h | Siraya Tech Fibreheart PETG-CF Pro TDS | 2026-10-18 |
| SUNLU | SUNLU High Speed Matte PETG | 60–65 °C (140–149 °F) | 6–8 h | SUNLU Wiki: filament parameter table | 2026-10-18 |
| SUNLU | SUNLU PETG | 60–65 °C (140–149 °F) | 6–8 h | SUNLU Wiki: filament parameter table | 2026-10-18 |
| SUNLU | SUNLU PETG 2.0 | 65 °C (149 °F) | 6–8 h | SUNLU Wiki: filament parameter table | 2026-10-18 |
| SUNLU | SUNLU PETG-CF | 60–70 °C (140–158 °F) | 6–8 h | SUNLU Wiki: filament parameter table | 2026-10-18 |