Prusament PETG Ultraglow
Prusament PETG Ultraglow prints at 250–270 °C (482–518 °F) nozzle and 75–95 °C (167–203 °F) bed, per Prusa product page.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle250–270 °C(482–518 °F)
- Bed75–95 °C(167–203 °F)
- Speed—
- Dry—
- Density—
Those settings follow the Prusa product page. Where an older database figure disagrees, the note is under Sources & notes.
Printers
Fits means nozzle, bed, and enclosure all pass. Partial means the full recommended range is out of reach. A missing essential check is not a fit.
- A1Needs a hardened nozzle
- A1 miniBed range only partly in reach
- P1PNeeds a hardened nozzle
- P1SNeeds a hardened nozzle
- X1C
- X2D
- P2S
- H2D
- H2S
- MK4SNeeds a hardened nozzle
- Core One+Needs a hardened nozzle
- XLNeeds a hardened nozzle
- K1C
- CentauriNot enough data
- Kobra 3 MaxBed range only partly in reach
- Q1 ProNot enough data
- SV08 MaxNot enough data
Colors
- Ultraglow GreenNo hex
Related
Answers
- How do I get good PETG prints?
- How do I fix stringing?
- Do I need to dry filament, and how?
- What is the best filament for outdoor use?
- What filament is waterproof?
Sources & notes
Prusament PETG Ultraglow (PETG) is not in the Open Filament Database dump dated 2026-10-13. The Prusa product page lists a nozzle temperature of 260 ± 10 °C (500 ± 18 °F), recorded here as 250–270 °C (482–518 °F), and a heatbed temperature of 85 ± 10 °C (185 ± 18 °F), recorded here as 75–95 °C (https://www.prusa3d.com/product/prusament-petg-ultraglow-green-800g-nfc/), checked 2026-10-16. Diameter is 1.75 mm ± 0.04 mm. Print speed is not in our current sources.
Manufacturer page checked 16 October 2026. This record is not from the Open Filament Database. Manufacturer page checked 16 October 2026.
The product page lists nozzle temperature 260 ± 10 °C (500 ± 18 °F) and heatbed temperature 85 ± 10 °C (185 ± 18 °F).
Highly abrasive material: needs a hardened nozzle, and accelerated wear on printer components should be expected. A 0.6 mm hardened non-high-flow nozzle is recommended.
Drying before use is described as optional. A drying temperature and drying time are not listed.
Prusa product page · Brand site · Page JSON
Full specifications
| Material | PETG |
|---|---|
| Nozzle temperature | 250–270 °C (482–518 °F) |
| Bed temperature | 75–95 °C (167–203 °F) |
| Print speed | — |
| Volumetric flow | — |
| Drying | — |
| Enclosure required | — |
| Chamber temperature | — |
| Hardened nozzle | YesThe Prusa product page says this is a highly abrasive material and needs a hardened nozzle. It recommends a 0.6 mm hardened non-high-flow nozzle. |
| Spool weight | 800 g and 25 g |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.04 mm |
| Recorded density | — |
| Minimum nozzle diameter | — |
| Shore A hardness | — |
| Certifications | — |
| Price per kg | — |
| Manufacturer page checked | 16 October 2026Prusa product page |
A blank was blank in the source. Nothing here is estimated.
Printer notes
| Printer | Result | Why |
|---|---|---|
| Bambu Lab A1 | Partial | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Bambu Lab A1 mini | Partial | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed range reaches 95 °C (203 °F), above this printer's maximum of 80 °C (176 °F). This printer cannot reach the full recommended range. The low end, 75 °C (167 °F), is within that maximum. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Bambu Lab P1P | Partial | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Bambu Lab P1S | Partial | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Bambu Lab X1 Carbon | Fits | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 110 °C (230 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Bambu Lab X2D | Fits | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Bambu Lab P2S | Fits | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 110 °C (230 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Bambu Lab H2D | Fits | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 350 °C (662 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Bambu Lab H2S | Fits | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 350 °C (662 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Prusa MK4S | Partial | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 290 °C (554 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Prusa CORE One+ | Partial | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 290 °C (554 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Prusa XL | Partial | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 290 °C (554 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 120 °C (248 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened. |
| Creality K1C | Fits | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Elegoo Centauri Carbon | — | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 320 °C (608 °F). This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. The stock nozzle is hardened. |
| Anycubic Kobra 3 Max | Partial | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed range reaches 95 °C (203 °F), above this printer's maximum of 90 °C (194 °F). This printer cannot reach the full recommended range. The low end, 75 °C (167 °F), is within that maximum. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. |
| Qidi Q1 Pro | — | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 350 °C (662 °F). This printer's maximum bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. |
| Sovol SV08 Max | — | The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F). The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 100 °C (212 °F). Whether an enclosure is required is not in our current sources. This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources. |
Questions
What nozzle temperature does Prusament PETG Ultraglow recommend?
The Prusa product page lists a nozzle temperature of 260 ± 10 °C (500 ± 18 °F), recorded here as 250–270 °C (482–518 °F).
What bed temperature does Prusament PETG Ultraglow recommend?
The Prusa product page lists a heatbed temperature of 85 ± 10 °C (185 ± 18 °F), recorded here as 75–95 °C (167–203 °F).
What print speed does Prusament PETG Ultraglow list?
Print speed and volumetric flow are not in our current sources on the Prusa product page.
Does Prusament PETG Ultraglow require an enclosure?
An enclosure requirement is not in our current sources on the Prusa product page.
Does Prusament PETG Ultraglow require a hardened nozzle?
Yes. The Prusa product page says this is a highly abrasive material and needs a hardened nozzle. It recommends a 0.6 mm hardened non-high-flow nozzle.
How should Prusament PETG Ultraglow be dried?
The Prusa product page says to dry the filament before use and marks drying as optional. A drying temperature and drying time are not in our current sources.
What spool weights does Prusament PETG Ultraglow come in?
Listed spool weights: 800 g and a 25 g sample.
What is the price per kilogram of Prusament PETG Ultraglow?
Price per kilogram is not in our current sources on the filament record. A checked retailer price, when one exists, is a separate deal file.
Provenance
Prusa product page
Record. Fields: product, material, colors, spoolWeightsG, diametersMm, diameterToleranceMm, nozzleTempC, bedTempC, hardenedNozzle.