Partial
Prusament PETG Ultraglow on the A1
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle250–270 °C(482–518 °F)
- Bed75–95 °C(167–203 °F)
- Speed—
- Dry—
- Density—
Print at 250–270 °C (482–518 °F) nozzle, 75–95 °C (167–203 °F) bed.
A1 maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Bambu Lab A1 with Prusament PETG Ultraglow: This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.
Dataset imported 16 October 2026. Manufacturer page checked 14 October 2026.
Prusa product page · checked 16 October 2026 · Printer source · Filament JSON
The A1 FAQ states a maximum hotend temperature of 300 °C and a maximum heatbed temperature of 100 °C.
The same FAQ says the printer is pre-installed with a 0.4 mm stainless steel nozzle. Hardened steel nozzles are sold separately.
The FAQ does not call the frame open or enclosed, so enclosure is left empty.
Questions
Can the Bambu Lab A1 reach the listed PETG Ultraglow nozzle temperature?
The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F).
Can the A1 reach the listed bed temperature?
The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. The stock nozzle is not hardened.