Prusament PETG Ultraglow on the Ender-3 V3 Neo
product, material, colors, spoolWeightsG, diametersMm, Diameter tolerance, Nozzle, Bed, Hardened nozzle. Source: Prusament product page · Last checked 16 October 2026
Drying, drying.hours. Source: Prusament TDS · Last checked 18 October 2026
Source: Creality product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle250–270 °C(482–518 °F)
- Bed75–95 °C(167–203 °F)
- Speed—
- Dry55 °C(131 °F)for 6 hManufacturer drying table →
- Density—
Nozzle, Bed. Source: Prusament product page · Last checked 16 October 2026
Drying. Source: Prusament TDS · Last checked 18 October 2026
Compatibility
- The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F).
- The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 100 °C (212 °F).
- Whether an enclosure is required is not in our current sources.
- This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.
Related answers
- Which nozzle (brass, hardened, 0.6mm) should I use for which filament?
- Why does PETG stick too well (or not at all) to my bed?
- How do I get good PETG prints?
- What filament should I use for hooks, brackets and load-bearing parts?
Ender-3 V3 Neo maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Filament page · Ender-3 V3 Neo
Sources & notes
Creality Ender-3 V3 Neo with Prusament PETG Ultraglow: This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.
Dataset imported 16 October 2026. Manufacturer page checked 19 October 2026.
Prusa product page · checked 16 October 2026 · Printer source · Filament JSON
The specification table lists nozzle temperature ≤300 °C, heatbed temperature ≤100 °C, a 220 × 220 × 220 mm build volume, and printing speed ≤500 mm/s.
The extruder is listed as Sprite 2 Extruder. The page does not call it direct drive, and it does not state a nozzle alloy, so those fields are empty.
Filament compatibility is recommended PLA, PETG, and TPU (90A TPU or harder), and supported ABS and ASA with an enclosure recommended. Auto filament refill and identification are listed as yes with CFS nano. The page does not say the printer itself is enclosed.
Questions
Can the Creality Ender-3 V3 Neo reach the listed PETG Ultraglow nozzle temperature?
The listed nozzle maximum of 270 °C (518 °F) is within this printer's maximum of 300 °C (572 °F).
Can the Ender-3 V3 Neo reach the listed bed temperature?
The listed bed maximum of 95 °C (203 °F) is within this printer's maximum of 100 °C (212 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.