Anycubic PET-CF
Published . Updated .
Print settings for Anycubic PET-CF, copied from the maker's data.
Commission on these links. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 260–290 °C (500–554 °F).
- Bed: 80–100 °C (176–212 °F).
- Print speed: 30–60 mm/s.
- Use a hardened nozzle.
The maker did not list an enclosure.
Will it work on a printer?
Yes, it works means the nozzle, the bed, and an enclosure all clear that printer. Works with a caveat means the full recommended range is out of reach. A missing essential check is not a yes.
Works on 8 of 23 printers we track.
Colors
- Black#212322
Related
Where these numbers come from
Anycubic PET-CF (PET) lists 260–290 °C (500–554 °F) nozzle and 80–100 °C (176–212 °F) bed, from the Anycubic New Materials collection page (https://store.anycubic.com/collections/new-materials), checked 2026-10-26. The same check lists print speed 30–60 mm/s, drying 80–90 °C (176–194 °F) for 8–12 h, volumetric flow up to 8 mm³/s, a hardened nozzle is required, listed price $39.99, not stored as a price per kilogram. Drying and the other settings are from the product page (https://store.anycubic.com/products/pet-cf). The product page spec table does not list nozzle or bed.
Manufacturer page checked 26 October 2026. This record is not from the Open Filament Database. Manufacturer page checked 26 October 2026.
Nozzle and bed temperatures are from the Anycubic New Materials collection page. The product page spec table does not list them.
Listed price $39.99 on the product page. Not recorded as a price per kilogram.
Full specifications
| Material | PET |
|---|---|
| Nozzle temperature | 260–290 °C (500–554 °F) |
| Bed temperature | 80–100 °C (176–212 °F) |
| Print speed | 30–60 mm/s |
| Volumetric flow | up to 8 mm³/s |
| Drying | 80–90 °C (176–194 °F) for 8–12 h |
| Enclosure required | Not listed by the maker |
| Chamber temperature | Not listed by the maker |
| Hardened nozzle | YesThe product page says a hardened nozzle is required. |
| Spool weight | Not listed by the maker |
| Diameter | Not listed by the maker |
| Diameter tolerance | Not listed by the maker |
| Recorded density | 1.3 g/cm³ |
| Minimum nozzle diameter | 0.4 mm |
| Shore A hardness | Not listed by the maker |
| Certifications | Not listed by the maker |
| Price per kg | Not listed by the maker |
| Manufacturer page checked | 26 October 2026Anycubic product page |
Not listed by the maker means the source did not publish that figure.
Provenance
Anycubic product page
License Manufacturer product page. Record. Repository. Fields: nozzleTempC, bedTempC, speeds.printMmS, speeds.volumetricMm3S, drying, densityGCm3, minNozzleDiameterMm, hardenedNozzle, colors.