Anycubic
Anycubic Kobra 3 Max V2
Filter a material table with this printer. The source URL is under Sources & notes.
- Nozzle max300 °C (572 °F)
- Bed max90 °C (194 °F)
- Enclosure—
- HardenedStock
- AMS / MMUACE 2 Pro, standard 4 colors, up to 8 colors
Source: Anycubic product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
Sources & notes
The Anycubic Kobra 3 Max V2 lists a maximum nozzle temperature of 300 °C (572 °F) and lists a maximum bed temperature of 90 °C (194 °F), according to https://store.anycubic.com/products/kobra-3-max-v2-combo-3d-printer. Manufacturer page checked 2026-10-19.
Source checked 19 October 2026.
| Maximum nozzle | 300 °C (572 °F) |
|---|---|
| Maximum bed | 90 °C (194 °F) |
| Enclosure | — |
| Stock nozzle hardened | Yes |
| Direct drive | Yes |
| AMS or MMU | ACE 2 Pro, standard 4 colors, up to 8 colors |
The specification table lists a hardened steel nozzle at a maximum of 300 °C, standard diameter 0.4 mm, and a hotbed maximum of 90 °C.
Extruder type is short distance extrusion with a dual-gear extruder. Recommended speed is 300 mm/s and the maximum is 600 mm/s.
ACE 2 Pro is listed as standard 4 colors, up to 8 colors, with drying up to 65 °C. Supporting filaments are PLA, PETG, and TPU, and the table says TPU 95A is not compatible with the ACE 2 Pro.
The product FAQ says the Combo prints PLA, PETG, and TPU (68D), and that printing with PA and PC is not recommended. The page does not state an enclosure.
Questions
What maximum nozzle temperature does the Anycubic Kobra 3 Max V2 list?
300 °C (572 °F), according to https://store.anycubic.com/products/kobra-3-max-v2-combo-3d-printer.
What maximum bed temperature does the Anycubic Kobra 3 Max V2 list?
90 °C (194 °F), according to https://store.anycubic.com/products/kobra-3-max-v2-combo-3d-printer.
Is the Kobra 3 Max V2 enclosed?
Enclosure is not stated in the source checked for this record.
Does the Kobra 3 Max V2 ship with a hardened nozzle?
The source describes a hardened stock nozzle.
Materials on this printer
Open a material to see which listed limits the Kobra 3 Max V2 can meet.