Prusa
Prusa CORE One+ (Gen 2) INDX
Published . Updated .
Filter a material table with this printer. The source URL is under Sources & notes.
- Hottest nozzle300 °C(572 °F)
- Hottest bed120 °C(248 °F)
- Enclosureenclosed
- Hardened nozzleStock
- Multi-color unitINDX toolchanger
Source: Prusa CORE One+ (Gen 2) INDX · Last checked 27 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
Sources & notes
The Prusa CORE One+ (Gen 2) INDX lists a maximum nozzle temperature of 300 °C (572 °F) and lists a maximum bed temperature of 120 °C (248 °F), according to https://www.prusa3d.com/en/product/prusa-core-one-gen-2-indx-8-tool/. Manufacturer page checked 2026-10-27.
Source checked 27 October 2026.
| Maximum nozzle | 300 °C (572 °F) |
|---|---|
| Maximum bed | 120 °C (248 °F) |
| Enclosure | enclosed |
| Stock nozzle hardened | Yes |
| Direct drive | Not listed |
| AMS or MMU | INDX toolchanger |
The product page lists a 300 °C (572 °F) maximum nozzle temperature, a heatbed up to 120 °C (248 °F), and a chamber up to 55 °C (131 °F).
The stock nozzle is a 0.4 mm high-flow nozzle in surface-hardened nitrocarburized steel. The listed build volume is 248 × 205 × 270 mm.
Questions
What maximum nozzle temperature does the Prusa CORE One+ (Gen 2) INDX list?
300 °C (572 °F), according to https://www.prusa3d.com/en/product/prusa-core-one-gen-2-indx-8-tool/.
What maximum bed temperature does the Prusa CORE One+ (Gen 2) INDX list?
120 °C (248 °F), according to https://www.prusa3d.com/en/product/prusa-core-one-gen-2-indx-8-tool/.
Is the CORE One+ (Gen 2) INDX enclosed?
Recorded as enclosed.
Does the CORE One+ (Gen 2) INDX ship with a hardened nozzle?
The source describes a hardened stock nozzle.
Materials on this printer
Open a material to see which listed limits the CORE One+ (Gen 2) INDX can meet.