eSUN 3D TPE-95A on the Anycubic Kobra 3 Max V2
Published . Updated .
Print settings and compatibility for eSUN 3D TPE-95A on the Anycubic Kobra 3 Max V2, copied from the maker's data.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 230–270 °C (446–518 °F).
- Bed: 35–70 °C (95–158 °F).
- Print speed: up to 100 mm/s.
The maker did not list an enclosure or a hardened nozzle.
Will it work on this printer?
- Kobra 3 Max V2 maximums: nozzle 300 °C (572 °F), bed 90 °C (194 °F).
- The listed nozzle temperature is within this printer's reach.
- The listed bed temperature is within this printer's reach.
- Whether an enclosure is required is not listed by the maker.
- A hardened nozzle is not listed by the maker.
Related
Where these numbers come from
Filament: eSUN TPE-95A TDS (CN, file V1.1, document dated 2026.06 v1.0) · checked 21 October 2026
Printer: Kobra 3 Max V2 Combo · checked 19 October 2026
eSUN 3D TPE-95A (TPE) lists a nozzle temperature of 230–270 °C (446–518 °F) and a bed temperature of 35–70 °C (95–158 °F), drying at 60 °C (140 °F) for 5–7 h, and print speed up to 100 mm/s, from the eSUN TPE-95A TDS (https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf), checked 2026-10-21.
A figure is copied from a named source, and a missing figure stays blank. Methodology.
The specification table lists a hardened steel nozzle at a maximum of 300 °C (572 °F), standard diameter 0.4 mm, and a hotbed maximum of 90 °C (194 °F).
Extruder type is short distance extrusion with a dual-gear extruder. Recommended speed is 300 mm/s and the maximum is 600 mm/s.
ACE 2 Pro is listed as standard 4 colors, up to 8 colors, with drying up to 65 °C (149 °F). Supporting filaments are PLA, PETG, and TPU, and the table says TPU 95A is not compatible with the ACE 2 Pro.
The product FAQ says the Combo prints PLA, PETG, and TPU (68D), and that printing with PA and PC is not recommended. The page does not state an enclosure.