{
  "slug": "tpe-95a",
  "brand": "eSUN 3D",
  "brandSlug": "esun-3d",
  "product": "TPE-95A",
  "material": "TPE",
  "materialSlug": "tpe",
  "materialLabel": "TPE",
  "nozzleTempC": {
    "min": 230,
    "max": 270,
    "singleValue": false
  },
  "bedTempC": {
    "min": 35,
    "max": 70,
    "singleValue": false
  },
  "speeds": {
    "printMmS": {
      "min": null,
      "max": 100
    },
    "volumetricMm3S": {
      "min": null,
      "max": null
    }
  },
  "drying": {
    "maxTempC": 60,
    "hours": 7,
    "source": "filament",
    "minTempC": null,
    "hoursMin": 5,
    "sourceUrl": "https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf",
    "checked": "2026-10-21"
  },
  "enclosure": {
    "required": null,
    "chamberTempC": {
      "min": null,
      "ideal": null,
      "max": null
    }
  },
  "hardenedNozzle": null,
  "hardenedNozzleBasis": null,
  "traits": {
    "variantCount": 0,
    "abrasiveVariants": 0,
    "carbonFiberVariants": 0,
    "glassFiberVariants": 0
  },
  "spoolWeightsG": [],
  "emptySpoolWeightsG": [],
  "diametersMm": [],
  "densityGCm3": null,
  "diameterToleranceMm": null,
  "minNozzleDiameterMm": null,
  "shoreHardnessA": 95,
  "certifications": [],
  "colors": [],
  "colorCount": 0,
  "discontinued": false,
  "pricePerKg": null,
  "priceCurrency": null,
  "sourceUrl": "https://www.esun3d.com/tpe-95a-product",
  "datasheetUrl": "https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf",
  "safetySheetUrl": null,
  "brandWebsite": "https://esun3d.com/",
  "verifiedDate": "2026-10-21",
  "fieldSources": {
    "nozzleTempC": "https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf",
    "bedTempC": "https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf",
    "drying": "https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf",
    "speeds.printMmS": "https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf",
    "shoreHardnessA": "https://www.esun3d.com/tpe-95a-product"
  },
  "provenance": [
    {
      "source": "eSUN TPE-95A TDS (CN, file V1.1, document dated 2026.06 v1.0)",
      "license": "Manufacturer technical data sheet",
      "repository": "https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf",
      "recordUrl": "https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf",
      "fields": [
        "nozzleTempC",
        "bedTempC",
        "drying",
        "speeds.printMmS"
      ]
    }
  ],
  "ofd": {
    "brandSlug": "",
    "material": "TPE",
    "filamentSlug": "tpe-95a",
    "uuid": null
  },
  "spoolman": null,
  "citation": "eSUN 3D TPE-95A (TPE) lists a nozzle temperature of 230–270 °C (446–518 °F) and a bed temperature of 35–70 °C (95–158 °F), drying at 60 °C (140 °F) for 5–7 h, and print speed up to 100 mm/s, from the eSUN TPE-95A TDS (https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf), checked 2026-10-21.",
  "officialPage": {
    "href": "https://www.esun3d.com/tpe-95a-product",
    "label": "TPE-95A Flexible 3D Filament | eSUN Official Store",
    "checked": "2026-10-21"
  },
  "checked": {
    "verifiedAt": "2026-10-21",
    "sourceUrl": "https://www.esunchina.net/uploads/TPE-95A-TDS-CNV1.1.pdf",
    "sourceLabel": "eSUN TPE-95A TDS (CN, file V1.1, document dated 2026.06 v1.0)",
    "incomplete": false,
    "densityNote": "The TDS lists density as a range, 1.10–1.20 g/cm³, so no single density is recorded.",
    "notes": [
      "English official page https://www.esun3d.com/tpe-95a-product (HTTP 200) states 95A. Its specs are JS-rendered, so every printing value comes from the official eSUN China TDS (recommended printing parameters block): dry 60 °C (140 °F) for 5–7 h, nozzle 230–270 °C (446–518 °F), bed 35–70 °C (95–158 °F) on PEI, fan 100%, ≤100 mm/s, max flow 19 mm³/s (vase test).",
      "The TDS asks for a fresh hotend, not one used for fibre-filled filament, and low-friction feeding such as a bearing spool holder or dryer box.",
      "Press release (GlobeNewswire, 2026-10-21, https://www.globenewswire.com/news-release/2026/10/21/3385200/0/en/esun-unveils-tpe-95a-high-rebound-3d-printing-filament-with-up-to-58-rebound.html) claims, presented as eSUN claims: up to 58% rebound; vs TPU-95A, 93% higher rebound, faster printing and better wear; tough at -30 °C (-22 °F).",
      "The TDS lists density 1.10–1.20 g/cm³, tensile strength 21 MPa (XY) and 8 MPa (Z), elongation ≥450% (XY) and ≥75% (Z), and DIN abrasion ≤40 mm³. Recommended nozzle on that sheet is 0.4 mm, bed surface PEI, fan 100%."
    ]
  },
  "faq": [
    {
      "q": "What nozzle temperature does eSUN 3D TPE-95A recommend?",
      "a": "eSUN 3D TPE-95A lists a recommended nozzle temperature of 230–270 °C (446–518 °F) on the eSUN TPE-95A TDS."
    },
    {
      "q": "What bed temperature does eSUN 3D TPE-95A recommend?",
      "a": "eSUN 3D TPE-95A lists a recommended bed temperature of 35–70 °C (95–158 °F) on the eSUN TPE-95A TDS."
    },
    {
      "q": "What print speed does eSUN 3D TPE-95A list?",
      "a": "eSUN 3D TPE-95A lists a print speed up to 100 mm/s on the eSUN TPE-95A TDS. The same sheet lists a vase-test maximum flow of 19 mm³/s."
    },
    {
      "q": "Does eSUN 3D TPE-95A require an enclosure?",
      "a": "An enclosure requirement is not in our current sources on the eSUN TPE-95A TDS."
    },
    {
      "q": "Does eSUN 3D TPE-95A require a hardened nozzle?",
      "a": "A hardened-nozzle requirement is not in our current sources on the eSUN TPE-95A TDS."
    },
    {
      "q": "How should eSUN 3D TPE-95A be dried?",
      "a": "Dry eSUN 3D TPE-95A at 60 °C (140 °F) for 5–7 h, from the eSUN TPE-95A TDS."
    },
    {
      "q": "What spool weights does eSUN 3D TPE-95A come in?",
      "a": "Spool weights are not in our current sources on the eSUN TPE-95A TDS."
    },
    {
      "q": "What is the price per kilogram of eSUN 3D TPE-95A?",
      "a": "Price per kilogram is not in our current sources."
    }
  ],
  "missing": [
    "speeds.volumetricMm3S",
    "enclosure",
    "hardenedNozzle",
    "pricePerKg",
    "densityGCm3"
  ],
  "brandPriority": true
}