Anycubic Kobra 3 Max V2
Anycubic Kobra 3 Max V2 against 177 TPU products: 150 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 27 are missing an essential check. Manufacturer page checked 19 October 2026.
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Amolen Glow TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Amolen TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Anycubic TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU 85A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU 90A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU 95A HF | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Bambu Lab TPU for AMS | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| colorFabb TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality 95A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO Rapid TPU 95A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO TPU 72D | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO TPU 95A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone TPU 90A | — | Bed temperature is not in our current sources. | |
| Eryone TPU High-Speed | — | Bed temperature is not in our current sources. | |
| Eryone TPU Rainbow | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D TPU-95A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr FLEX Hard CF TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr FLEX Hard TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr FLEX Medium TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| extrudr FLEX Semisoft TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Hatchbox TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| JAYO TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Kingroon TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture High Speed TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture Luminous High Speed Glow TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polyflex 95 Hf High Speed TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polymaker Polyflex TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Protopasta TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Prusament TPU 95A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Fibreheart TPU-GF | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Flex TPU 64D | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Flex TPU 85A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Flex TPU Air 85A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Roamr TPU Air HR 80A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Siraya Tech Roamr TPU Air HR 85A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU 95A High Speed TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU TPU Silk | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA TPU 95A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA TPU 95A CF | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA TPU 98A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DJAKE TPU A95 | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DPower Elasti 90A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU 3DXFlex | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU 3DXFlex GF30 | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU 3DXStat ESD | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DXTech TPU GF | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North Matte TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North TPU EasyFlex | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Add-North TPU Pro Matte 85A | — | Bed temperature is not in our current sources. | |
| Add-North TPU Pro Matte 95A | — | Bed temperature is not in our current sources. | |
| Ambrosia TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| AzureFilm TPU 85A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| CC3D Silk TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Coexflex 60A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D Hytrel 3D4000FL TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| COEX 3D TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Cookiecad TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Das Filament TPU V2 Flexibel | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Devil Design TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dremel TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Flex 93A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Flex D53 TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints Flex D60 UV Resistant TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eolas Prints TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| EPAX 95A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy Mattflex 40D Matte TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy TPU CF | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy TPU FiberFlex 30D | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fiberlogy TPU FiberFlex 40D | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree TPU F3 80A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FiberThree TPU F3 98A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM Flexfill TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FilamentPM TPU 96 | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| FormFutura Python Flex TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil 95A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil 98A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Francofil TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Geeetech TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Gizmo Dorks TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| IEMAI TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic TPU 90A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inslogic TPU 95A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| kexcelled The K8 TPU 64D | — | Bed temperature is not in our current sources. | |
| MatterHackers Mh Build Series Flexible TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| MatterHackers TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek Cheetah TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek Chinchilla TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek Edge TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek Glow TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek NinjaFlex TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| NinjaTek TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Paramount 3D TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament Biodegradable Flexible 95A Soft TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Polar Filament TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator Primaselect TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaCreator TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Elixir Jessie Premium Silk TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrintedSolid Silk TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Push Plastic TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech TPU 95A HF | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| QIDI Tech TPU-Aero | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus Balena Filaflex TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus Conductive Filaflex TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus Filaflex TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 60A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 70A Ultra Soft | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 82A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 95 Foamy | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Recreus TPU FilaFlex 95A Medium Flex | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Glow TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Impact Abrasive Uv H2O Microbe Resistant ROSA TPU HardTech+ 83D | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Rosa Flex Glow TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Rosa Flex TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments Rosa Tpu Automotive 15 Glass Fiber | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments ROSA TPU HardTech+ 83D | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ROSA3D Filaments TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Flexible 87A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Flexible 95A Gt 3 TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Flexible 95A Matte TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Flexible Tpu | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 High Speed TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Gt 3 TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart High Speed TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Matte TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Neon Cyberpunk Color TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Pastel 92A Flexible TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Small Spool Flexible TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart Temperature Sensitive Flexible 95A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart TPU Liquid Luster | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart TPU Luminous Glow In The Dark | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SainSmart TPU Mango Mojito | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D Glow TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SMART MATERIALS 3D TPU CF | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum TPU S-Flex 85A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum TPU S-Flex 90A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum TPU S-Flex 98A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Spectrum TPU S-Flex Carbon | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TECBEARS 95A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TEQStone TPU 95A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament TPU-82A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament TPU-87A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| The Filament TPU-95A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| TINMORRY 95A TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| XZN TPU 95A | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Zyltech TPU | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality HP-TPU | — | Nozzle temperature is not in our current sources. | |
| Eryone TPU | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D TPU-LW | — | Nozzle temperature is not in our current sources. | |
| Inland TPU | — | Nozzle temperature is not in our current sources. | |
| SUNLU TPU90A | — | Nozzle temperature is not in our current sources. | |
| SUNLU TPU95A | — | Nozzle temperature is not in our current sources. | |
| Alzament TPU 95A | — | Nozzle temperature is not in our current sources. | |
| AzureFilm TPU/TPE | — | Nozzle temperature is not in our current sources. | |
| EasyPrint Flex 95A TPU | — | Nozzle temperature is not in our current sources. | |
| Fiberlogy TPU MattFlex 40D | — | Nozzle temperature is not in our current sources. | |
| GST3D TPU | — | Nozzle temperature is not in our current sources. | |
| PolyFlex TPU90 | — | Nozzle temperature is not in our current sources. | |
| PolyFlex TPU95 | — | Nozzle temperature is not in our current sources. | |
| PolyFlex TPU95-HF | — | Nozzle temperature is not in our current sources. | |
| PrimaSelect TPU Flex | — | Nozzle temperature is not in our current sources. | |
| PrintedSolid TPU PS Imports | — | Nozzle temperature is not in our current sources. | |
| Professional LAB TPU | — | Nozzle temperature is not in our current sources. | |
| SmartPrint TPU | — | Nozzle temperature is not in our current sources. | |
| Snapmaker High Flow TPU95 | — | Nozzle temperature is not in our current sources. | |
| Snapmaker TPU | — | Nozzle temperature is not in our current sources. | |
| Snapmaker TPU 90A | — | Nozzle temperature is not in our current sources. | |
| Snapmaker TPU 95A HF | — | Nozzle temperature is not in our current sources. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Anycubic Kobra 3 Max V2 against 177 TPU products: 150 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 27 are missing an essential check. Manufacturer page checked 19 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare