Anycubic Kobra 3 Max V2
Anycubic Kobra 3 Max V2 against 45 PLA+ products: 27 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 18 are missing an essential check. Manufacturer page checked 19 October 2026.
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic PLA Plus | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Ender PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Plus | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO RAPID PLA Plus | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Eryone PLA+ High-Speed | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D ePLA+HS | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA+ CMYK | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Overture PLA Plus | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Dual-Color Silk PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Silk PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Standard PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Tough Pro PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 4D-Lab PLA+ Plus | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Flash PLA+ (High Speed 600mm/s) | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament Hyper PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Dancyn 3D Prints PLA+ High Speed | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fremover PLA+ High Speed | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| iBOSS 3D PLA+/Pro Silk Triple Red Blue Green | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Numakers PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Patron EG PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaValue PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| YooPai Matte PLA+ | Fits | Kobra 3 Max V2 can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland High Speed PLA+ | — | Nozzle temperature is not in our current sources. | |
| JAYO PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU High Speed PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA+ 2.0 | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Dual-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Four-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Rainbow | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Tri-Color | — | Nozzle temperature is not in our current sources. | |
| Alzament PLA+ | — | Nozzle temperature is not in our current sources. | |
| GST3D Bright Pla+ Space | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ Military | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ SILK | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ Special | — | Nozzle temperature is not in our current sources. | |
| Professional LAB PLA+ | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA+ | — | Nozzle temperature is not in our current sources. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Anycubic Kobra 3 Max V2 against 45 PLA+ products: 27 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 18 are missing an essential check. Manufacturer page checked 19 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare