SUNLU PLA Lightweight (Lw-PLA)
Published . Updated .
Print settings for SUNLU PLA Lightweight (Lw-PLA), copied from the maker's data.
Commission on these links. As an Amazon Associate we earn from qualifying purchases.
What to set
Set your slicer to
- Nozzle: 180–200 °C (356–392 °F).
- Bed: 50–60 °C (122–140 °F).
- Print speed: 30–100 mm/s.
The maker did not list an enclosure or a hardened nozzle.
Will it work on a printer?
Yes, it works means the nozzle, the bed, and an enclosure all clear that printer. Works with a caveat means the full recommended range is out of reach. A missing essential check is not a yes.
Works on 20 of 23 printers we track.
Colors
- WhiteNo hex
Related
Where these numbers come from
SUNLU PLA Lightweight (Lw-PLA) (PLA) lists a nozzle temperature of 180–200 °C (356–392 °F) and a bed temperature of 50–60 °C (122–140 °F), and print speed 30–100 mm/s, from the SUNLU product page (https://store.sunlu.com/products/sunlu-pla-lightweight-lwpla-3d-printer-filament-0-8kg), checked 2026-10-24. The spool is 0.8 kg. Drying is not stated on that page.
Manufacturer page checked 24 October 2026. This record is not from the Open Filament Database. Manufacturer page checked 24 October 2026.
0.8 kg spool. The product page does not state a drying temperature or drying time.
Full specifications
| Material | PLA |
|---|---|
| Nozzle temperature | 180–200 °C (356–392 °F) |
| Bed temperature | 50–60 °C (122–140 °F) |
| Print speed | 30–100 mm/sVolumetric flow was not on the source. |
| Volumetric flow | Not listed by the maker |
| Drying | Not listed by the maker |
| Enclosure required | Not listed by the maker |
| Chamber temperature | Not listed by the maker |
| Hardened nozzle | Not listed by the maker |
| Spool weight | 800 g |
| Diameter | 1.75 mm |
| Diameter tolerance | ±0.02 mm |
| Recorded density | Not listed by the maker |
| Minimum nozzle diameter | Not listed by the maker |
| Shore A hardness | Not listed by the maker |
| Certifications | Not listed by the maker |
| Price per kg | Not listed by the maker |
| Manufacturer page checked | 24 October 2026SUNLU product page |
Not listed by the maker means the source did not publish that figure.
Provenance
SUNLU product page
License Manufacturer product page. Record. Repository. Fields: nozzleTempC, bedTempC, speeds.printMmS, diameterToleranceMm, spoolWeightsG, diametersMm.