ELEGOO ASA-CF
ELEGOO ASA-CF has no nozzle or bed temperature in our current sources, per ELEGOO ASA-CF US product page.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speed—
- Dry85 °C(185 °F)for 8 h
- Density—
Those settings follow the ELEGOO ASA-CF US product page. Where an older database figure disagrees, the note is under Sources & notes.
Printers
Fits means nozzle, bed, and enclosure all pass. Partial means the full recommended range is out of reach. A missing essential check is not a fit.
- A1Needs a hardened nozzle
- A1 miniNeeds a hardened nozzle
- P1PNeeds a hardened nozzle
- P1SNeeds a hardened nozzle
- X1CNot enough data
- X2DNot enough data
- P2SNot enough data
- H2DNot enough data
- H2SNot enough data
- MK4SNeeds a hardened nozzle
- Core One+Needs a hardened nozzle
- XLNeeds a hardened nozzle
- K1CNot enough data
- CentauriNot enough data
- Kobra 3 MaxNot enough data
- Q1 ProNot enough data
- SV08 MaxNot enough data
Colors
- Carbon Fiber BlackNo hex
- Carbon Fiber GreyNo hex
- Carbon Fiber RedNo hex
- Carbon Fiber BlueNo hex
- Carbon Fiber GreenNo hex
- Carbon Fiber SandNo hex
Related
Answers
- Are carbon fiber filaments worth it, and do I need a hardened nozzle?
- What is the best filament for outdoor use?
- What filament should I use for heat?
Sources & notes
ELEGOO ASA-CF is not in the Open Filament Database dump dated 2026-10-13. Nozzle and bed temperatures are not in our current sources on the ELEGOO US product page checked 2026-10-16. The page lists drying for 8 hours. Print speed is not in our current sources.
Manufacturer page checked 16 October 2026. This record is not from the Open Filament Database. Manufacturer page checked 16 October 2026.
The product page does not list a nozzle or bed temperature. It lists drying at 85 °C (185 °F) for 8 hours and says to use an enclosed printer.
ELEGOO support on that page said carbon fiber content is about 5–10% short-cut fiber. HDT up to 108 °C (226 °F) is a heat-deflection claim, not a nozzle temperature.
ELEGOO ASA-CF US product page · Brand site · Page JSON
FilamentFacts may earn a commission when you buy through links on this page.
Full specifications
| Material | ASA |
|---|---|
| Nozzle temperature | — |
| Bed temperature | — |
| Print speed | — |
| Volumetric flow | — |
| Drying | 85 °C (185 °F) for 8 h |
| Enclosure required | — |
| Chamber temperature | — |
| Hardened nozzle | — |
| Spool weight | 1 kg (1000 g) |
| Diameter | 1.75 mm |
| Diameter tolerance | — |
| Recorded density | — |
| Minimum nozzle diameter | — |
| Shore A hardness | — |
| Certifications | — |
| Price per kg | — |
| Manufacturer page checked | 16 October 2026ELEGOO ASA-CF US product page |
A blank was blank in the source. Nothing here is estimated.
Printer notes
| Printer | Result | Why |
|---|---|---|
| Bambu Lab A1 | Partial | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. |
| Bambu Lab A1 mini | Partial | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. |
| Bambu Lab P1P | Partial | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. |
| Bambu Lab P1S | Partial | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. |
| Bambu Lab X1 Carbon | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is hardened. |
| Bambu Lab X2D | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is hardened. |
| Bambu Lab P2S | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is hardened. |
| Bambu Lab H2D | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is hardened. |
| Bambu Lab H2S | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is hardened. |
| Prusa MK4S | Partial | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. |
| Prusa CORE One+ | Partial | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. |
| Prusa XL | Partial | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is not hardened. |
| Creality K1C | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is hardened. |
| Elegoo Centauri Carbon | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. The stock nozzle is hardened. |
| Anycubic Kobra 3 Max | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. |
| Qidi Q1 Pro | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. |
| Sovol SV08 Max | — | Nozzle temperature is not in our current sources. Bed temperature is not in our current sources. Whether an enclosure is required is not in our current sources. This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources. |
Questions
What nozzle temperature does ELEGOO ASA-CF recommend?
A recommended nozzle temperature for ELEGOO ASA-CF is not in our current sources on the ELEGOO US product page.
What bed temperature does ELEGOO ASA-CF recommend?
A recommended bed temperature for ELEGOO ASA-CF is not in our current sources on the ELEGOO US product page.
What print speed does ELEGOO ASA-CF list?
Print speed is not in our current sources on the ELEGOO US product page.
Does ELEGOO ASA-CF require an enclosure?
An enclosure boolean is not in our current sources in the filament record. The ELEGOO US product page says to use an enclosed printer in a well-ventilated area.
Does ELEGOO ASA-CF require a hardened nozzle?
A hardened-nozzle requirement is not in our current sources. The page says the filament is carbon-fiber reinforced.
How should ELEGOO ASA-CF be dried?
The ELEGOO US product page says to dry ASA-CF at 85 °C (185 °F) for 8 hours before use.
What spool weights does ELEGOO ASA-CF come in?
Listed spool weight: 1 kg (1000 g). Empty spool weight: 154 ± 10 g.
What is the price per kilogram of ELEGOO ASA-CF?
Price per kilogram is not in our current sources on the filament record. A checked retailer price, when one exists, is a separate deal file.
Provenance
ELEGOO US product page
Record. Fields: product, material, colors, spoolWeightsG, emptySpoolWeightsG, diametersMm, enclosure.required.