ELEGOO ASA-CF on the SV08 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speed—
- Dry85 °C(185 °F)for 8 h
- Density—
No nozzle or bed temperature on the source. Dry 8 h at 85 °C (185 °F) if it's been open.
SV08 Max maximums: nozzle 300 °C (572 °F), bed 100 °C (212 °F).
Sources & notes
Sovol SV08 Max with ELEGOO ASA-CF: Nozzle temperature is not in our current sources.
Dataset imported 16 October 2026. Manufacturer page checked 14 October 2026.
ELEGOO ASA-CF US product page · checked 16 October 2026 · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed ASA-CF nozzle temperature?
Nozzle temperature is not in our current sources.
Can the SV08 Max reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.