ELEGOO PETG Glitter on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speed—
- Dry60 °C(140 °F)for 8 h
- Density—
No nozzle or bed temperature on the source. Dry 8 h at 60 °C (140 °F) if it's been open.
CORE One+ maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa CORE One+ with ELEGOO PETG Glitter: Nozzle temperature is not in our current sources.
Dataset imported 16 October 2026. Manufacturer page checked 14 October 2026.
ELEGOO PETG Glitter US product page · checked 16 October 2026 · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed PETG Glitter nozzle temperature?
Nozzle temperature is not in our current sources.
Can the CORE One+ reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.