SUNLU PETG Glow In The Dark Filament on the K3
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle235–245 °C(455–473 °F)
- Bed—
- Speed—
- Dry—
- Density1.24 g/cm³
Nozzle. Source: SUNLU product page · Last checked 20 October 2026
Compatibility
- This printer's maximum nozzle temperature is not in our current sources.
- Bed temperature is not in our current sources.
- Whether an enclosure is required is not in our current sources.
- This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.
Related answers
- Why does PETG stick too well (or not at all) to my bed?
- How do I get good PETG prints?
- What filament should I use for hooks, brackets and load-bearing parts?
- How do I fix stringing?
K3 maximums: nozzle not in our current sources, bed not in our current sources.
Sources & notes
Creality K3 with SUNLU PETG Glow In The Dark Filament: This printer's maximum nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 20 October 2026.
SUNLU PETG Glow in The Dark (Luminous) 3D Printer Filament 1KG | SUNLU Online Store · checked 20 October 2026 · Printer source · Filament JSON
Creality lists the K3 as a pre-order at $849, with estimated shipping from 2 November 2026.
The product page states a 260×260×260 mm build volume and print speeds up to 500 mm/s.
The page does not state a maximum nozzle temperature or a maximum bed temperature.
Questions
Can the Creality K3 reach the listed PETG Glow In The Dark Filament nozzle temperature?
This printer's maximum nozzle temperature is not in our current sources.
Can the K3 reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.