Protopasta Static Dissipative PETG on the K3
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle195–225 °C(383–437 °F)
- Bed60–80 °C(140–176 °F)
- Speed—
- Dry—
- Density1.27 g/cm³
Source: Protopasta product page · Last checked 19 October 2026
Compatibility
- This printer's maximum nozzle temperature is not in our current sources.
- This printer's maximum bed temperature is not in our current sources.
- Whether an enclosure is required is not in our current sources.
- A hardened nozzle is not recorded for this filament.
Related answers
- Why does PETG stick too well (or not at all) to my bed?
- How do I get good PETG prints?
- What filament should I use for hooks, brackets and load-bearing parts?
- How do I fix stringing?
K3 maximums: nozzle not in our current sources, bed not in our current sources.
Sources & notes
Creality K3 with Protopasta Static Dissipative PETG: This printer's maximum nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 20 October 2026.
Filament source · Printer source · Filament JSON
Creality lists the K3 as a pre-order at $849, with estimated shipping from 2 November 2026.
The product page states a 260×260×260 mm build volume and print speeds up to 500 mm/s.
The page does not state a maximum nozzle temperature or a maximum bed temperature.
Questions
Can the Creality K3 reach the listed Static Dissipative PETG nozzle temperature?
This printer's maximum nozzle temperature is not in our current sources.
Can the K3 reach the listed bed temperature?
This printer's maximum bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.