FilamentFacts
Polymaker HT-PLA-GF spool

Polymaker HT-PLA-GF on the K3

How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.

Check price at AmazonHT-PLA-GF 114 - 1.75mm Grey (Hex Code: #91999f) 1 kg

FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.

  • Nozzle210–230 °C(410–446 °F)
  • Bed25–60 °C(77–140 °F)
  • Speedup to 350 mm/s
  • Dry60 °C(140 °F)for 6 hManufacturer drying table →
  • Density1.33 g/cm³

Speed, Drying. Source: Polymaker TDS · Last checked 18 October 2026

Compatibility

Related answers

Nozzle210–230 °C (410–446 °F)
Bed25–60 °C (77–140 °F)
Shared scale, 0–320 °C (32–608 °F). A missing bar means that temperature is not in our current sources.

K3 maximums: nozzle not in our current sources, bed not in our current sources.

Filament page · K3

Sources & notes

Creality K3 with Polymaker HT-PLA-GF: This printer's maximum nozzle temperature is not in our current sources.

Dataset imported 13 October 2026. Manufacturer page checked 20 October 2026.

Filament source · Printer source · Filament JSON

Creality lists the K3 as a pre-order at $849, with estimated shipping from 2 November 2026.

The product page states a 260×260×260 mm build volume and print speeds up to 500 mm/s.

The page does not state a maximum nozzle temperature or a maximum bed temperature.

Questions

Can the Creality K3 reach the listed HT-PLA-GF nozzle temperature?

This printer's maximum nozzle temperature is not in our current sources.

Can the K3 reach the listed bed temperature?

This printer's maximum bed temperature is not in our current sources.

Is an enclosure required?

Whether an enclosure is required is not in our current sources.

Is a hardened nozzle recorded?

This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.