Creality Hyper PLA-CF on the K3
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speed—
- Dry50–60 °C(122–140 °F)for 8 hManufacturer drying table →
- Density1.25 g/cm³
Drying. Source: Creality TDS · Last checked 18 October 2026
Compatibility
- Nozzle temperature is not in our current sources.
- Bed temperature is not in our current sources.
- Whether an enclosure is required is not in our current sources.
- This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.
Related answers
- Are carbon fiber filaments worth it, and do I need a hardened nozzle?
- Which nozzle (brass, hardened, 0.6mm) should I use for which filament?
- Why is my filament brittle and snapping?
- What is HT-PLA / heat-resistant PLA (and PLA-CF) good for?
K3 maximums: nozzle not in our current sources, bed not in our current sources.
Sources & notes
Creality K3 with Creality Hyper PLA-CF: Nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 20 October 2026.
Filament source · Printer source · Filament JSON
Creality lists the K3 as a pre-order at $849, with estimated shipping from 2 November 2026.
The product page states a 260×260×260 mm build volume and print speeds up to 500 mm/s.
The page does not state a maximum nozzle temperature or a maximum bed temperature.
Questions
Can the Creality K3 reach the listed Hyper PLA-CF nozzle temperature?
Nozzle temperature is not in our current sources.
Can the K3 reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.