Eryone PLA Luminous on the Kobra 3 Max V2
Bed. Source: Eryone product page · Last checked 19 October 2026
Source: Anycubic product page · Last checked 19 October 2026
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed55–70 °C(131–158 °F)
- Speed—
- Dry75 °C(167 °F)maximum
- Density1.23 g/cm³
Bed. Source: Eryone product page · Last checked 19 October 2026
Compatibility
- Nozzle temperature is not in our current sources.
- The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 90 °C (194 °F).
- Whether an enclosure is required is not in our current sources.
- A hardened nozzle is not recorded for this filament.
Related answers
- Why is my filament brittle and snapping?
- What is HT-PLA / heat-resistant PLA (and PLA-CF) good for?
- How do I get good PLA prints?
- Do I need to dry filament, and how?
Kobra 3 Max V2 maximums: nozzle 300 °C (572 °F), bed 90 °C (194 °F).
Filament page · Kobra 3 Max V2
Sources & notes
Anycubic Kobra 3 Max V2 with Eryone PLA Luminous: Nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 19 October 2026.
Eryone product page · checked 19 October 2026 · Printer source · Filament JSON
The specification table lists a hardened steel nozzle at a maximum of 300 °C, standard diameter 0.4 mm, and a hotbed maximum of 90 °C.
Extruder type is short distance extrusion with a dual-gear extruder. Recommended speed is 300 mm/s and the maximum is 600 mm/s.
ACE 2 Pro is listed as standard 4 colors, up to 8 colors, with drying up to 65 °C. Supporting filaments are PLA, PETG, and TPU, and the table says TPU 95A is not compatible with the ACE 2 Pro.
The product FAQ says the Combo prints PLA, PETG, and TPU (68D), and that printing with PA and PC is not recommended. The page does not state an enclosure.
Questions
Can the Anycubic Kobra 3 Max V2 reach the listed PLA Luminous nozzle temperature?
Nozzle temperature is not in our current sources.
Can the Kobra 3 Max V2 reach the listed bed temperature?
The listed bed maximum of 70 °C (158 °F) is within this printer's maximum of 90 °C (194 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.