{ "title": "FilamentFacts Filament Drying and Moisture Guide by Brand", "version": "2026-10-19", "date_checked": "2026-10-18", "publisher": "FilamentFacts", "url": "https://filamentfacts.com/data/filament-drying", "method": "Values copied only from manufacturer technical data sheets, product pages, or the manufacturer's own wiki/knowledge base. Blank means no official source we found gives the value. Nothing is estimated. Fahrenheit is computed from the published Celsius (rounded). Community notes are material-level and only included where public Reddit threads clearly agree; they are not manufacturer guidance.", "license_note": "Facts from cited manufacturer documents; compilation by FilamentFacts.", "row_count": 154, "rows": [ { "id": "dry-001", "brand": "Bambu Lab", "product": "Bambu PLA Basic", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 50, "drying_temp_c_max": 50, "drying_temp_f_min": 122, "drying_temp_f_max": 122, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Technical_Data_Sheet_bf3411ce-be39-4db7-9669-1b4671d2196b.pdf?v=1734060943", "source_title": "Bambu Lab PLA Basic technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-002", "brand": "Bambu Lab", "product": "Bambu PLA Matte", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 50, "drying_temp_c_max": 50, "drying_temp_f_min": 122, "drying_temp_f_max": 122, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Matte_Technical_Data_Sheet_60a941f9-8495-48ec-b1b0-52e07ff0f4c2.pdf?v=1734060943", "source_title": "Bambu Lab PLA Matte technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-003", "brand": "Bambu Lab", "product": "Bambu PLA Translucent", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 50, "drying_temp_c_max": 50, "drying_temp_f_min": 122, "drying_temp_f_max": 122, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://store.bblcdn.com/s7/default/729a8bf233e9474db25c8d5be1e64a00/Bambu_PLA_Translucent_Technical_Data_Sheet.pdf", "source_title": "Bambu Lab PLA Translucent technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-004", "brand": "Bambu Lab", "product": "Bambu PLA Silk+", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Silk__Technical_Data_Sheet.pdf?v=1733472353", "source_title": "Bambu Lab PLA Silk+ technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-005", "brand": "Bambu Lab", "product": "Bambu PLA Tough+", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://store.bblcdn.eu/s8/default/f0d6e1c73b9e42c3abeb9540f3433225/new_Bambu_PLA_Tough_Technical_Data_Sheet.pdf", "source_title": "Bambu Lab PLA Tough+ technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-006", "brand": "Bambu Lab", "product": "Bambu PLA Aero", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0574/3116/2995/files/Bambu_PLA_Aero_Technical_Data_Sheet.pdf?v=1715335547", "source_title": "Bambu Lab PLA Aero technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-007", "brand": "Bambu Lab", "product": "Bambu PLA Galaxy", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Galaxy_Technical_Data_Sheet.pdf?v=1709278402", "source_title": "Bambu Lab PLA Galaxy technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-008", "brand": "Bambu Lab", "product": "Bambu PLA Marble", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_PLA_Marble_Technical_Data_Sheet.pdf", "source_title": "Bambu Lab PLA Marble technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-009", "brand": "Bambu Lab", "product": "Bambu PLA Metal", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_PLA_Metal_Technical_Data_Sheet.pdf?v=1695182427", "source_title": "Bambu Lab PLA Metal technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-010", "brand": "Bambu Lab", "product": "Bambu PLA Wood", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambus_PLA_Wood_Technical_Data_Sheet.pdf?v=1731406725", "source_title": "Bambu Lab PLA Wood technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-011", "brand": "Bambu Lab", "product": "Bambu PLA Sparkle", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopifycdn.net/s/files/1/0584/7236/6216/files/Bambu_PLA_Sparkle-Technical_Data_Sheet.pdf", "source_title": "Bambu Lab PLA Sparkle technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-012", "brand": "Bambu Lab", "product": "Bambu PLA Glow", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0573/5320/7868/files/Bambu_PLA_Glow_Technical_Data_Sheet.pdf?v=1701764565", "source_title": "Bambu Lab PLA Glow technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-013", "brand": "Bambu Lab", "product": "Bambu PLA Basic Gradient", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA_Basic_Gradient_Technical_Data_Sheet.pdf", "source_title": "Bambu Lab PLA Basic Gradient technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-014", "brand": "Bambu Lab", "product": "Bambu PLA Pure", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 50, "drying_temp_c_max": 50, "drying_temp_f_min": 122, "drying_temp_f_max": 122, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://store.bblcdn.com/s7/default/0e7400b878d84516a1ae605c1edaeab0/pla_pure_-TDS.pdf", "source_title": "Bambu Lab PLA Pure technical data sheet", "date_checked": "2026-10-18", "notes": "TDS also gives AMS 2 Pro/AMS HT settings (45°C/113°F for 12 h with filament inserted; 55°C/131°F for 8 h not inserted) and a recommended re-drying interval of 18 days of ambient exposure.", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-015", "brand": "Bambu Lab", "product": "Bambu PLA-CF", "material_family": "PLA-CF", "base_polymer": "PLA", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PLA-CF_Technical_Data_Sheet_V3.pdf", "source_title": "Bambu Lab PLA-CF technical data sheet", "date_checked": "2026-10-18", "notes": "Bambu Lab Wiki table lists 50-60°C (122-140°F) forced-air oven for PLA-CF/GF.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-016", "brand": "Bambu Lab", "product": "Bambu PETG HF", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://store.bblcdn.com/ce12d65176a94f1086e6aefa238e62e2.pdf", "source_title": "Bambu Lab PETG HF technical data sheet", "date_checked": "2026-10-18", "notes": "Bambu Lab Wiki table lists 60-65°C (140-149°F) forced-air oven for PETG/PETG-CF.", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-017", "brand": "Bambu Lab", "product": "Bambu PETG Translucent", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0574/3116/2995/files/Bambu_PETG_Translucent_Technical_Data_Sheet.pdf?v=1704680051", "source_title": "Bambu Lab PETG Translucent technical data sheet", "date_checked": "2026-10-18", "notes": "Bambu Lab Wiki table lists 60-65°C (140-149°F) forced-air oven for PETG/PETG-CF.", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-018", "brand": "Bambu Lab", "product": "Bambu PETG Matte", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://store.bblcdn.com/s5/default/f235921f9c0e4543a8f99704c577741b/PETG_Matte.pdf", "source_title": "Bambu Lab PETG Matte technical data sheet", "date_checked": "2026-10-18", "notes": "TDS also gives AMS 2 Pro/AMS HT 60°C (140°F) for 12 h with filament inserted. Bambu Lab Wiki table lists 60-65°C (140-149°F) forced-air oven for PETG/PETG-CF.", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-019", "brand": "Bambu Lab", "product": "Bambu PETG-CF", "material_family": "PETG-CF", "base_polymer": "PETG", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PETG-CF_Technical_Data_Sheet_V2.pdf", "source_title": "Bambu Lab PETG-CF technical data sheet", "date_checked": "2026-10-18", "notes": "Bambu Lab Wiki table lists 60-65°C (140-149°F) forced-air oven for PETG/PETG-CF.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-020", "brand": "Bambu Lab", "product": "Bambu ABS", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_ABS_Technical_Data_Sheet_V3.pdf", "source_title": "Bambu Lab ABS technical data sheet", "date_checked": "2026-10-18", "notes": "Bambu Lab Wiki table lists 75-85°C (167-185°F) forced-air oven for ABS/ASA.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-021", "brand": "Bambu Lab", "product": "Bambu ABS-GF", "material_family": "ABS-GF", "base_polymer": "ABS", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0574/3116/2995/files/Bambu_ABS-GF_Technical_Data_Sheet.pdf?v=1713428682", "source_title": "Bambu Lab ABS-GF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-022", "brand": "Bambu Lab", "product": "Bambu ASA", "material_family": "ASA", "base_polymer": "ASA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_ASA_Technical_Data_Sheet.pdf", "source_title": "Bambu Lab ASA technical data sheet", "date_checked": "2026-10-18", "notes": "Bambu Lab Wiki table lists 75-85°C (167-185°F) forced-air oven for ABS/ASA.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-023", "brand": "Bambu Lab", "product": "Bambu ASA Aero", "material_family": "ASA", "base_polymer": "ASA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_ASA_Aero_Technical_Data_Sheet.pdf?v=1712823163", "source_title": "Bambu Lab ASA Aero technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-024", "brand": "Bambu Lab", "product": "Bambu ASA-CF", "material_family": "ASA-CF", "base_polymer": "ASA", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Recommended (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambus_ASA-CF_Technical_Data_Sheet.pdf?v=1726741601", "source_title": "Bambu Lab ASA-CF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-025", "brand": "Bambu Lab", "product": "Bambu PC", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_PC_Technical_Data_Sheet.pdf", "source_title": "Bambu Lab PC technical data sheet", "date_checked": "2026-10-18", "notes": "Bambu Lab Wiki table lists 75-85°C (167-185°F) forced-air oven for PC.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-026", "brand": "Bambu Lab", "product": "Bambu PC FR", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PC_FR_Technical_Data_Sheet.pdf?v=1734509576", "source_title": "Bambu Lab PC FR technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-027", "brand": "Bambu Lab", "product": "Bambu TPU 85A", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_TPU_85A_Technical_Data_Sheet_a7233668-497b-487f-af8a-3adb49fafaa1.pdf?v=1741314674", "source_title": "Bambu Lab TPU 85A technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-028", "brand": "Bambu Lab", "product": "Bambu TPU 90A", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_TPU_90A_Technical_Data_Sheet_582bf8f6-1f0a-474c-aeda-9e72af3689dc.pdf", "source_title": "Bambu Lab TPU 90A technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-029", "brand": "Bambu Lab", "product": "Bambu TPU 95A HF", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_TPU_95A_HF_Technical_Data_Sheet.pdf?v=1700101819", "source_title": "Bambu Lab TPU 95A HF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-030", "brand": "Bambu Lab", "product": "Bambu TPU for AMS", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_TPU_for_AMS_Technical_Data_Sheet.pdf?v=1730944629", "source_title": "Bambu Lab TPU for AMS technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-031", "brand": "Bambu Lab", "product": "Bambu PA6-CF", "material_family": "PA-CF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0651/1555/4032/files/Bambu_PA6-CF_Technical_Data_Sheet-v2.pdf", "source_title": "Bambu Lab PA6-CF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-032", "brand": "Bambu Lab", "product": "Bambu PA6-GF", "material_family": "PA-GF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0574/3116/2995/files/Bambu_PA6-GF_Technical_Data_Sheet.pdf?v=1710923932", "source_title": "Bambu Lab PA6-GF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-033", "brand": "Bambu Lab", "product": "Bambu PAHT-CF", "material_family": "PA-CF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambu_PAHT-CF_Technical_Data_Sheet_V2.pdf", "source_title": "Bambu Lab PAHT-CF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-034", "brand": "Bambu Lab", "product": "Bambu PET-CF", "material_family": "PET-CF", "base_polymer": "PET", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0645/5876/0155/files/Bambu_PET-CF_Technical_Data_Sheet.pdf?v=1718702203", "source_title": "Bambu Lab PET-CF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-035", "brand": "Bambu Lab", "product": "Bambu PPA-CF", "material_family": "PPA-CF", "base_polymer": "PPA (polyamide)", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 100, "drying_temp_c_max": 140, "drying_temp_f_min": 212, "drying_temp_f_max": 284, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) drying oven", "storage_guidance": "Printing and storage humidity < 20% RH (sealed, with desiccant)", "storage_rh_max_pct": 20, "manufacturer_dry_before_use": "Required (Bambu Lab Wiki)", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0584/7236/6216/files/Bambus_PPA-CF_Technical_Data_Sheet_2ab26420-79f5-4692-888e-090006814050.pdf?v=1724815044", "source_title": "Bambu Lab PPA-CF technical data sheet", "date_checked": "2026-10-18", "notes": "TDS: within this range, a higher temperature gives a better drying result.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-036", "brand": "Polymaker", "product": "PolyLite PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PLA_TDS_EN_V5.4.pdf", "source_title": "PolyLite PLA technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-037", "brand": "Polymaker", "product": "PolyMax PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyMax_PLA_TDS_EN_V5.4.pdf", "source_title": "PolyMax PLA technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-038", "brand": "Polymaker", "product": "Polymaker PLA Pro", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "Polymaker recommends its PolyBox or PolyDryer box for printing/storage", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/TDS_Polymaker_PLA_Pro_v6.0_2026-01-26_EN.pdf", "source_title": "Polymaker PLA Pro technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-039", "brand": "Polymaker", "product": "PolyLite LW-PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "Polymaker recommends its PolyBox or PolyDryer box for printing/storage", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_LW-PLA_TDS_US_V5.4.pdf", "source_title": "PolyLite LW-PLA technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-040", "brand": "Polymaker", "product": "PolyLite PLA-CF", "material_family": "PLA-CF", "base_polymer": "PLA", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PLA-CF_TDS_EN_V5.4.pdf", "source_title": "PolyLite PLA-CF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-041", "brand": "Polymaker", "product": "Polymaker HT-PLA", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "Polymaker recommends its PolyBox or PolyDryer box for printing/storage", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/Polymaker_HT-PLA_TDS_EN_V1.1.pdf", "source_title": "Polymaker HT-PLA technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-042", "brand": "Polymaker", "product": "Polymaker HT-PLA-GF", "material_family": "PLA-GF", "base_polymer": "PLA", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/Polymaker_HT-PLA-GF_TDS_EN_V1.1.pdf", "source_title": "Polymaker HT-PLA-GF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-043", "brand": "Polymaker", "product": "Polymaker HT-PLA Pro", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": null, "drying_temp_c_max": null, "drying_temp_f_min": null, "drying_temp_f_max": null, "drying_time_h_min": null, "drying_time_h_max": null, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "Polymaker recommends its PolyBox or PolyDryer box for printing/storage", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/TDS_Polymaker_HT-PLA_Pro_V1.2_2026-7-15_EN.pdf?v=1784193805", "source_title": "Polymaker HT-PLA Pro technical data sheet", "date_checked": "2026-10-18", "notes": "Current TDS (v1.0/1.2) gives no drying temperature or time.", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-044", "brand": "Polymaker", "product": "PolyLite PETG", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "Polymaker recommends its PolyBox when printing and storing in the resealable bag", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PETG_TDS_EN_V5.4.pdf", "source_title": "PolyLite PETG technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-045", "brand": "Polymaker", "product": "PolyMax PETG", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyMax_PETG_TDS_EN_V5.4.pdf", "source_title": "PolyMax PETG technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-046", "brand": "Polymaker", "product": "Polymaker PETG", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "Polymaker recommends its PolyBox or PolyDryer box for printing/storage", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PETG_TDS_Polymaker_297e875c-5d38-4d2b-ba68-eef8916de183.pdf", "source_title": "Polymaker PETG technical data sheet", "date_checked": "2026-10-18", "notes": "Polymaker's newer PETG sheet says 60°C (140°F); its PolyLite/PolyMax PETG sheets say 65°C (149°F).", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-047", "brand": "Polymaker", "product": "PolyLite ABS", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_ABS_TDS_EN_V5.4.pdf", "source_title": "PolyLite ABS technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-048", "brand": "Polymaker", "product": "Polymaker ASA", "material_family": "ASA", "base_polymer": "ASA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 7, "drying_time_h_max": 7, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "Polymaker recommends its PolyBox or PolyDryer box for printing/storage", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_ASA_TDS_EN_V5.4.pdf", "source_title": "Polymaker ASA technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-049", "brand": "Polymaker", "product": "PolyLite PC", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 75, "drying_temp_c_max": 75, "drying_temp_f_min": 167, "drying_temp_f_max": 167, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyLite_PC_TDS_EN_V5.4.pdf", "source_title": "PolyLite PC technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-050", "brand": "Polymaker", "product": "PolyMax PC", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 75, "drying_temp_c_max": 75, "drying_temp_f_min": 167, "drying_temp_f_max": 167, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyMax_PC_TDS_EN_V5.4.pdf", "source_title": "PolyMax PC technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-051", "brand": "Polymaker", "product": "Polymaker PC-ABS", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 75, "drying_temp_c_max": 75, "drying_temp_f_min": 167, "drying_temp_f_max": 167, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/Polymaker_PC_ABS_TDS_EN_V5.4.pdf", "source_title": "Polymaker PC-ABS technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-052", "brand": "Polymaker", "product": "PolyFlex TPU95-HF", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyFlex_TPU95_HF_TDS_EN_V5.4.pdf", "source_title": "PolyFlex TPU95-HF technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-053", "brand": "Polymaker", "product": "PolyMide CoPA", "material_family": "PA", "base_polymer": "PA (nylon)", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 100, "drying_temp_c_max": 100, "drying_temp_f_min": 212, "drying_temp_f_max": 212, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified (TDS 'drying setting')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0548/7299/7945/files/PolyMide_CoPA_TDS_V5.4.pdf", "source_title": "PolyMide CoPA technical data sheet", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-054", "brand": "Prusament", "product": "Prusament PLA / rPLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand guide (per Prusament material)", "drying_temp_c_min": 45, "drying_temp_c_max": 45, "drying_temp_f_min": 113, "drying_temp_f_max": 113, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "Store in a closed space or box with desiccant (Prusa KB)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://help.prusa3d.com/article/drying-filament_332086", "source_title": "Prusa Knowledge Base: Drying filament", "date_checked": "2026-10-18", "notes": "Prusa warns not to exceed these temperatures or times.", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-055", "brand": "Prusament", "product": "Prusament PETG (all versions)", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "brand guide (per Prusament material)", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "Store in a closed space or box with desiccant (Prusa KB)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://help.prusa3d.com/article/drying-filament_332086", "source_title": "Prusa Knowledge Base: Drying filament", "date_checked": "2026-10-18", "notes": "Prusa warns not to exceed these temperatures or times.", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-056", "brand": "Prusament", "product": "Prusament TPU", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "brand guide (per Prusament material)", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "Store in a closed space or box with desiccant (Prusa KB)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://help.prusa3d.com/article/drying-filament_332086", "source_title": "Prusa Knowledge Base: Drying filament", "date_checked": "2026-10-18", "notes": "Prusa warns not to exceed these temperatures or times.", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-057", "brand": "Prusament", "product": "Prusament ASA", "material_family": "ASA", "base_polymer": "ASA", "fiber_filled": false, "source_scope": "brand guide (per Prusament material)", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 4, "drying_time_h_max": 4, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "Store in a closed space or box with desiccant (Prusa KB)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://help.prusa3d.com/article/drying-filament_332086", "source_title": "Prusa Knowledge Base: Drying filament", "date_checked": "2026-10-18", "notes": "Prusa warns not to exceed these temperatures or times.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-058", "brand": "Prusament", "product": "Prusament PC Blend", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "brand guide (per Prusament material)", "drying_temp_c_min": 85, "drying_temp_c_max": 85, "drying_temp_f_min": 185, "drying_temp_f_max": 185, "drying_time_h_min": 5, "drying_time_h_max": 5, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "Store in a closed space or box with desiccant (Prusa KB)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://help.prusa3d.com/article/drying-filament_332086", "source_title": "Prusa Knowledge Base: Drying filament", "date_checked": "2026-10-18", "notes": "Prusa warns not to exceed these temperatures or times.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-059", "brand": "Prusament", "product": "Prusament PC Blend Carbon Fiber", "material_family": "PC-CF", "base_polymer": "PC", "fiber_filled": true, "source_scope": "brand guide (per Prusament material)", "drying_temp_c_min": 90, "drying_temp_c_max": 90, "drying_temp_f_min": 194, "drying_temp_f_max": 194, "drying_time_h_min": 4, "drying_time_h_max": 4, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "Store in a closed space or box with desiccant (Prusa KB)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://help.prusa3d.com/article/drying-filament_332086", "source_title": "Prusa Knowledge Base: Drying filament", "date_checked": "2026-10-18", "notes": "Prusa warns not to exceed these temperatures or times.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-060", "brand": "Prusament", "product": "Prusament PA11 Carbon Fiber", "material_family": "PA-CF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "brand guide (per Prusament material)", "drying_temp_c_min": 90, "drying_temp_c_max": 90, "drying_temp_f_min": 194, "drying_temp_f_max": 194, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "Store in a closed space or box with desiccant (Prusa KB)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://help.prusa3d.com/article/drying-filament_332086", "source_title": "Prusa Knowledge Base: Drying filament", "date_checked": "2026-10-18", "notes": "Prusa warns not to exceed these temperatures or times.", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-061", "brand": "Prusament", "product": "Prusament PP Carbon Fiber / Glass Fiber", "material_family": "PP-CF/GF", "base_polymer": "PP", "fiber_filled": true, "source_scope": "brand guide (per Prusament material)", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 2, "drying_time_h_max": 4, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "Store in a closed space or box with desiccant (Prusa KB)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://help.prusa3d.com/article/drying-filament_332086", "source_title": "Prusa Knowledge Base: Drying filament", "date_checked": "2026-10-18", "notes": "Prusa warns not to exceed these temperatures or times.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-062", "brand": "Prusament", "product": "Prusament PA11", "material_family": "PA", "base_polymer": "PA (nylon)", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 90, "drying_temp_c_max": 90, "drying_temp_f_min": 194, "drying_temp_f_max": 194, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://prusament.com/materials/prusament-pa11/", "source_title": "Prusament PA11 material page", "date_checked": "2026-10-18", "notes": "Recommended when unsure how long the spool has been out of its sealed bag; page says print quality deteriorates 'between a few days and a month'.", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-063", "brand": "ELEGOO", "product": "ELEGOO PLA series (general guidance)", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 50, "drying_temp_c_max": 60, "drying_temp_f_min": 122, "drying_temp_f_max": 140, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Forced-air filament drying cabinet (never microwave or kitchen oven)", "storage_guidance": "Store cool, dry and dark: 15-25°C (59-77°F), < 30% RH", "storage_rh_max_pct": 30, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.elegoo.com/filaments/fdm-filament-drying-and-storage-guide", "source_title": "ELEGOO Wiki: FDM filament drying and storage guide", "date_checked": "2026-10-18", "notes": "Listed as 55 ± 5°C.", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-064", "brand": "ELEGOO", "product": "ELEGOO PETG series (general guidance)", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 55, "drying_temp_c_max": 65, "drying_temp_f_min": 131, "drying_temp_f_max": 149, "drying_time_h_min": 8, "drying_time_h_max": 10, "drying_time_qualifier": "", "drying_method": "Forced-air filament drying cabinet (never microwave or kitchen oven)", "storage_guidance": "Store cool, dry and dark: 15-25°C (59-77°F), < 30% RH", "storage_rh_max_pct": 30, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.elegoo.com/filaments/fdm-filament-drying-and-storage-guide", "source_title": "ELEGOO Wiki: FDM filament drying and storage guide", "date_checked": "2026-10-18", "notes": "Listed as 60 ± 5°C.", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-065", "brand": "ELEGOO", "product": "ELEGOO TPU (general guidance)", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 65, "drying_temp_c_max": 75, "drying_temp_f_min": 149, "drying_temp_f_max": 167, "drying_time_h_min": 6, "drying_time_h_max": 10, "drying_time_qualifier": "", "drying_method": "Forced-air filament drying cabinet (never microwave or kitchen oven)", "storage_guidance": "Store cool, dry and dark: 15-25°C (59-77°F), < 30% RH", "storage_rh_max_pct": 30, "manufacturer_dry_before_use": "Mandatory", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.elegoo.com/filaments/fdm-filament-drying-and-storage-guide", "source_title": "ELEGOO Wiki: FDM filament drying and storage guide", "date_checked": "2026-10-18", "notes": "Listed as 70 ± 5°C.", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-066", "brand": "ELEGOO", "product": "ELEGOO ASA (general guidance)", "material_family": "ASA", "base_polymer": "ASA", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 65, "drying_temp_c_max": 75, "drying_temp_f_min": 149, "drying_temp_f_max": 167, "drying_time_h_min": 4, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Forced-air filament drying cabinet (never microwave or kitchen oven)", "storage_guidance": "Store cool, dry and dark: 15-25°C (59-77°F), < 30% RH", "storage_rh_max_pct": 30, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.elegoo.com/filaments/fdm-filament-drying-and-storage-guide", "source_title": "ELEGOO Wiki: FDM filament drying and storage guide", "date_checked": "2026-10-18", "notes": "Listed as 70 ± 5°C.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-067", "brand": "ELEGOO", "product": "ELEGOO ABS (general guidance)", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 65, "drying_temp_c_max": 75, "drying_temp_f_min": 149, "drying_temp_f_max": 167, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Forced-air filament drying cabinet (never microwave or kitchen oven)", "storage_guidance": "Store cool, dry and dark: 15-25°C (59-77°F), < 30% RH", "storage_rh_max_pct": 30, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.elegoo.com/filaments/fdm-filament-drying-and-storage-guide", "source_title": "ELEGOO Wiki: FDM filament drying and storage guide", "date_checked": "2026-10-18", "notes": "Listed as 70 ± 5°C.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-068", "brand": "ELEGOO", "product": "ELEGOO PC (general guidance)", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 75, "drying_temp_c_max": 85, "drying_temp_f_min": 167, "drying_temp_f_max": 185, "drying_time_h_min": 6, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Forced-air filament drying cabinet (never microwave or kitchen oven)", "storage_guidance": "Store cool, dry and dark: 15-25°C (59-77°F), < 30% RH", "storage_rh_max_pct": 30, "manufacturer_dry_before_use": "Mandatory", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.elegoo.com/filaments/fdm-filament-drying-and-storage-guide", "source_title": "ELEGOO Wiki: FDM filament drying and storage guide", "date_checked": "2026-10-18", "notes": "Listed as 80 ± 5°C.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-069", "brand": "ELEGOO", "product": "ELEGOO PETG Pro", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://us.elegoo.com/products/petg-pro-filament-20-kg", "source_title": "ELEGOO US store: PETG Pro", "date_checked": "2026-10-18", "notes": "Product page: 'Dry ... before use for optimal print quality.'", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-070", "brand": "ELEGOO", "product": "ELEGOO Rapid PETG", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://us.elegoo.com/products/rapid-petg-filament-20kg", "source_title": "ELEGOO US store: Rapid PETG", "date_checked": "2026-10-18", "notes": "Product page: 'Dry ... before use for optimal print quality.'", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-071", "brand": "ELEGOO", "product": "ELEGOO PETG Translucent", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://us.elegoo.com/products/petg-translucent", "source_title": "ELEGOO US store: PETG Translucent", "date_checked": "2026-10-18", "notes": "Product page: 'Dry ... before use for optimal print quality.'", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-072", "brand": "ELEGOO", "product": "ELEGOO PETG HF", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://us.elegoo.com/products/petg-hf", "source_title": "ELEGOO US store: PETG HF", "date_checked": "2026-10-18", "notes": "Product page: 'Dry ... before use for optimal print quality.'", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-073", "brand": "ELEGOO", "product": "ELEGOO PETG Glitter", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://us.elegoo.com/products/petg-glitter", "source_title": "ELEGOO US store: PETG Glitter", "date_checked": "2026-10-18", "notes": "Product page: 'Dry ... before use for optimal print quality.'", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-074", "brand": "ELEGOO", "product": "ELEGOO PETG-CF", "material_family": "PETG-CF", "base_polymer": "PETG", "fiber_filled": true, "source_scope": "product page", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://us.elegoo.com/products/petg-cf-filament-1-75-mm-colored-5-kg", "source_title": "ELEGOO US store: PETG-CF", "date_checked": "2026-10-18", "notes": "Product page: 'Dry ... before use for optimal print quality.'", "community_moisture_note": "", "community_links": "" }, { "id": "dry-075", "brand": "ELEGOO", "product": "ELEGOO ASA-CF", "material_family": "ASA-CF", "base_polymer": "ASA", "fiber_filled": true, "source_scope": "product page", "drying_temp_c_min": 85, "drying_temp_c_max": 85, "drying_temp_f_min": 185, "drying_temp_f_max": 185, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://us.elegoo.com/products/asa-cf", "source_title": "ELEGOO US store: ASA-CF", "date_checked": "2026-10-18", "notes": "Product page: 'Dry ... before use for optimal print quality.'", "community_moisture_note": "", "community_links": "" }, { "id": "dry-076", "brand": "ELEGOO", "product": "ELEGOO PPS-CF", "material_family": "PPS-CF", "base_polymer": "PPS", "fiber_filled": true, "source_scope": "product page", "drying_temp_c_min": 100, "drying_temp_c_max": 120, "drying_temp_f_min": 212, "drying_temp_f_max": 248, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://us.elegoo.com/products/pps-cf", "source_title": "ELEGOO US store: PPS-CF", "date_checked": "2026-10-18", "notes": "Product page: 'Dry ... before use for optimal print quality.'", "community_moisture_note": "", "community_links": "" }, { "id": "dry-077", "brand": "SUNLU", "product": "SUNLU PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 55, "drying_temp_f_min": 122, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-078", "brand": "SUNLU", "product": "SUNLU PLA+", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 55, "drying_temp_f_min": 122, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-079", "brand": "SUNLU", "product": "SUNLU PLA+2.0", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 55, "drying_temp_f_min": 122, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-080", "brand": "SUNLU", "product": "SUNLU PETG", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 60, "drying_temp_c_max": 65, "drying_temp_f_min": 140, "drying_temp_f_max": 149, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-081", "brand": "SUNLU", "product": "SUNLU PETG 2.0", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-082", "brand": "SUNLU", "product": "SUNLU ABS", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 75, "drying_temp_c_max": 85, "drying_temp_f_min": 167, "drying_temp_f_max": 185, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-083", "brand": "SUNLU", "product": "SUNLU PLA Matte", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 55, "drying_temp_f_min": 122, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-084", "brand": "SUNLU", "product": "SUNLU Silk PLA+", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 55, "drying_temp_f_min": 122, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-085", "brand": "SUNLU", "product": "SUNLU High Speed PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 55, "drying_temp_f_min": 122, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-086", "brand": "SUNLU", "product": "SUNLU High Speed PLA+", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 55, "drying_temp_f_min": 122, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-087", "brand": "SUNLU", "product": "SUNLU High Speed Matte PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 55, "drying_temp_f_min": 122, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-088", "brand": "SUNLU", "product": "SUNLU High Speed Matte PETG", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 60, "drying_temp_c_max": 65, "drying_temp_f_min": 140, "drying_temp_f_max": 149, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-089", "brand": "SUNLU", "product": "SUNLU High Speed ABS", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 75, "drying_temp_c_max": 85, "drying_temp_f_min": 167, "drying_temp_f_max": 185, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-090", "brand": "SUNLU", "product": "SUNLU LW-PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 55, "drying_temp_f_min": 122, "drying_temp_f_max": 131, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-091", "brand": "SUNLU", "product": "SUNLU PLA-CF", "material_family": "PLA-CF", "base_polymer": "PLA", "fiber_filled": true, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 50, "drying_temp_f_min": 122, "drying_temp_f_max": 122, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-092", "brand": "SUNLU", "product": "SUNLU ASA", "material_family": "ASA", "base_polymer": "ASA", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-093", "brand": "SUNLU", "product": "SUNLU PETG-CF", "material_family": "PETG-CF", "base_polymer": "PETG", "fiber_filled": true, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 60, "drying_temp_c_max": 70, "drying_temp_f_min": 140, "drying_temp_f_max": 158, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-094", "brand": "SUNLU", "product": "SUNLU TPU 90A", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 60, "drying_temp_c_max": 70, "drying_temp_f_min": 140, "drying_temp_f_max": 158, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-095", "brand": "SUNLU", "product": "SUNLU TPU 95A", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 50, "drying_temp_c_max": 60, "drying_temp_f_min": 122, "drying_temp_f_max": 140, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-096", "brand": "SUNLU", "product": "SUNLU ABS-GF", "material_family": "ABS-GF", "base_polymer": "ABS", "fiber_filled": true, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 80, "drying_temp_c_max": 80, "drying_temp_f_min": 176, "drying_temp_f_max": 176, "drying_time_h_min": 2, "drying_time_h_max": 4, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-097", "brand": "SUNLU", "product": "SUNLU Easy PA", "material_family": "PA", "base_polymer": "PA (nylon)", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 80, "drying_temp_c_max": 110, "drying_temp_f_min": 176, "drying_temp_f_max": 230, "drying_time_h_min": 4, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-098", "brand": "SUNLU", "product": "SUNLU PA6-CF", "material_family": "PA-CF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 80, "drying_temp_c_max": 110, "drying_temp_f_min": 176, "drying_temp_f_max": 230, "drying_time_h_min": 6, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-099", "brand": "SUNLU", "product": "SUNLU PA6-GF", "material_family": "PA-GF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 80, "drying_temp_c_max": 110, "drying_temp_f_min": 176, "drying_temp_f_max": 230, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-100", "brand": "SUNLU", "product": "SUNLU PA12-CF", "material_family": "PA-CF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 80, "drying_temp_c_max": 110, "drying_temp_f_min": 176, "drying_temp_f_max": 230, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-101", "brand": "SUNLU", "product": "SUNLU PC", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-102", "brand": "SUNLU", "product": "SUNLU PC-ABS", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "brand parameter table (per product)", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Recommended", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.sunlu.com/wiki/61", "source_title": "SUNLU Wiki: filament parameter table", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-103", "brand": "eSUN", "product": "eSUN PLA+", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 50, "drying_temp_c_max": 50, "drying_temp_f_min": 122, "drying_temp_f_max": 122, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/pla-pro-product", "source_title": "eSUN product page: PLA+", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-104", "brand": "eSUN", "product": "eSUN PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 50, "drying_temp_c_max": 50, "drying_temp_f_min": 122, "drying_temp_f_max": 122, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/pla-product", "source_title": "eSUN product page: PLA", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-105", "brand": "eSUN", "product": "eSUN PLA-Basic", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 50, "drying_temp_c_max": 50, "drying_temp_f_min": 122, "drying_temp_f_max": 122, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/pla-basic-product", "source_title": "eSUN product page: PLA-Basic", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-106", "brand": "eSUN", "product": "eSUN ePLA+HS", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": null, "drying_temp_c_max": null, "drying_temp_f_min": null, "drying_temp_f_max": null, "drying_time_h_min": null, "drying_time_h_max": null, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/media/esun/catalog/certification/product/PLA_HS/ePLA_HS.pdf", "source_title": "eSUN ePLA+HS technical data sheet", "date_checked": "2026-10-18", "notes": "TDS lists 'Drying Recommendations: N/A'; product page also shows no drying value.", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-107", "brand": "eSUN", "product": "eSUN PETG", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "more than", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/petg-product", "source_title": "eSUN product page: PETG", "date_checked": "2026-10-18", "notes": "Page also says 'PETG should be dried at 60°C for 8 hours.'", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-108", "brand": "eSUN", "product": "eSUN PETG+", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 60, "drying_temp_c_max": 60, "drying_temp_f_min": 140, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "more than", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/petg-pro-product", "source_title": "eSUN product page: PETG+", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-109", "brand": "eSUN", "product": "eSUN eTPU-95A", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 55, "drying_temp_c_max": 55, "drying_temp_f_min": 131, "drying_temp_f_max": 131, "drying_time_h_min": 4, "drying_time_h_max": 4, "drying_time_qualifier": "more than", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/etpu-95a-product", "source_title": "eSUN product page: eTPU-95A", "date_checked": "2026-10-18", "notes": "Same page also says: if left unused for an extended period, dry at 60°C (140°F) for more than 8 hours.", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-110", "brand": "eSUN", "product": "eSUN ePA", "material_family": "PA", "base_polymer": "PA (nylon)", "fiber_filled": false, "source_scope": "product page", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 12, "drying_time_h_max": 12, "drying_time_qualifier": "more than", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/epa-product", "source_title": "eSUN product page: ePA", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-111", "brand": "eSUN", "product": "eSUN ePA-CF", "material_family": "PA-CF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "product page", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 12, "drying_time_h_max": 12, "drying_time_qualifier": "more than", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/epa-cf-product", "source_title": "eSUN product page: ePA-CF", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-112", "brand": "eSUN", "product": "eSUN ABS series (general guidance)", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": null, "drying_time_h_max": null, "drying_time_qualifier": "", "drying_method": "", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://www.esun3d.com/faqs/drying-temperatures", "source_title": "eSUN FAQ: Drying temperatures", "date_checked": "2026-10-18", "notes": "No drying time given.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-113", "brand": "Overture", "product": "Overture PLA series", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 50, "drying_temp_c_max": 50, "drying_temp_f_min": 122, "drying_temp_f_max": 122, "drying_time_h_min": 7, "drying_time_h_max": 7, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "After drying, store in conditions that prevent moisture uptake; avoid extended drying (brittleness)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "Low (Overture Wiki)", "source_url": "https://overture3d.com/blogs/overture-blogs/overture-3d-filament-drying-guide", "source_title": "Overture Filament Drying Guide", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-114", "brand": "Overture", "product": "Overture PETG series", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 7, "drying_time_h_max": 7, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "After drying, store in conditions that prevent moisture uptake; avoid extended drying (brittleness)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "High (Overture Wiki)", "source_url": "https://overture3d.com/blogs/overture-blogs/overture-3d-filament-drying-guide", "source_title": "Overture Filament Drying Guide", "date_checked": "2026-10-18", "notes": "Overture's own wiki and filament cheat sheet list PETG at 60°C (140°F) for 5 h.", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-115", "brand": "Overture", "product": "Overture TPU series", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 70, "drying_temp_c_max": 70, "drying_temp_f_min": 158, "drying_temp_f_max": 158, "drying_time_h_min": 7, "drying_time_h_max": 7, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "After drying, store in conditions that prevent moisture uptake; avoid extended drying (brittleness)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "High (Overture Wiki)", "source_url": "https://overture3d.com/blogs/overture-blogs/overture-3d-filament-drying-guide", "source_title": "Overture Filament Drying Guide", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-116", "brand": "Overture", "product": "Overture ABS", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 75, "drying_temp_c_max": 75, "drying_temp_f_min": 167, "drying_temp_f_max": 167, "drying_time_h_min": 7, "drying_time_h_max": 7, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "After drying, store in conditions that prevent moisture uptake; avoid extended drying (brittleness)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "Medium (Overture Wiki)", "source_url": "https://overture3d.com/blogs/overture-blogs/overture-3d-filament-drying-guide", "source_title": "Overture Filament Drying Guide", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-117", "brand": "Overture", "product": "Overture ASA", "material_family": "ASA", "base_polymer": "ASA", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 75, "drying_temp_c_max": 75, "drying_temp_f_min": 167, "drying_temp_f_max": 167, "drying_time_h_min": 7, "drying_time_h_max": 7, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "After drying, store in conditions that prevent moisture uptake; avoid extended drying (brittleness)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "Medium (Overture Wiki)", "source_url": "https://overture3d.com/blogs/overture-blogs/overture-3d-filament-drying-guide", "source_title": "Overture Filament Drying Guide", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-118", "brand": "Overture", "product": "Overture PC Professional", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 75, "drying_temp_c_max": 75, "drying_temp_f_min": 167, "drying_temp_f_max": 167, "drying_time_h_min": 7, "drying_time_h_max": 7, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "After drying, store in conditions that prevent moisture uptake; avoid extended drying (brittleness)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "Medium (Overture Wiki)", "source_url": "https://overture3d.com/blogs/overture-blogs/overture-3d-filament-drying-guide", "source_title": "Overture Filament Drying Guide", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-119", "brand": "Overture", "product": "Overture Easy Nylon", "material_family": "PA", "base_polymer": "PA (nylon)", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 95, "drying_temp_c_max": 95, "drying_temp_f_min": 203, "drying_temp_f_max": 203, "drying_time_h_min": 7, "drying_time_h_max": 7, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "After drying, store in conditions that prevent moisture uptake; avoid extended drying (brittleness)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "High (Overture Wiki)", "source_url": "https://overture3d.com/blogs/overture-blogs/overture-3d-filament-drying-guide", "source_title": "Overture Filament Drying Guide", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-120", "brand": "Creality", "product": "Creality PLA (general guidance)", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 50, "drying_temp_c_max": 60, "drying_temp_f_min": 122, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing when ambient humidity exceeds 50% (suggested)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Suggest", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "Creality filament dryer: 55°C (131°F), 8-12 h.", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-121", "brand": "Creality", "product": "Creality PLA-CF (general guidance)", "material_family": "PLA-CF", "base_polymer": "PLA", "fiber_filled": true, "source_scope": "brand guide", "drying_temp_c_min": 50, "drying_temp_c_max": 60, "drying_temp_f_min": 122, "drying_temp_f_max": 140, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing when ambient humidity exceeds 50% (suggested)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Suggest", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "Creality filament dryer: 55°C (131°F), 8-12 h.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-122", "brand": "Creality", "product": "Creality PETG (general guidance)", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing when ambient humidity exceeds 50% (suggested)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Suggest", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "Creality filament dryer: 60°C (140°F), 8-12 h.", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-123", "brand": "Creality", "product": "Creality ABS (general guidance)", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing when ambient humidity exceeds 50% (suggested)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Suggest", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "Creality filament dryer: 65°C (149°F), 8-12 h.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-124", "brand": "Creality", "product": "Creality ASA (general guidance)", "material_family": "ASA", "base_polymer": "ASA", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing when ambient humidity exceeds 50% (suggested)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Suggest", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "Creality filament dryer: 65°C (149°F), 8-12 h.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-125", "brand": "Creality", "product": "Creality PC (general guidance)", "material_family": "PC", "base_polymer": "PC", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 80, "drying_temp_c_max": 100, "drying_temp_f_min": 176, "drying_temp_f_max": 212, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing (must)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-126", "brand": "Creality", "product": "Creality TPU (general guidance)", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 65, "drying_temp_c_max": 75, "drying_temp_f_min": 149, "drying_temp_f_max": 167, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing (must)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "Creality filament dryer: 70°C (158°F), 8-12 h.", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-127", "brand": "Creality", "product": "Creality PA (general guidance)", "material_family": "PA", "base_polymer": "PA (nylon)", "fiber_filled": false, "source_scope": "brand guide", "drying_temp_c_min": 80, "drying_temp_c_max": 90, "drying_temp_f_min": 176, "drying_temp_f_max": 194, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing (must)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-128", "brand": "Creality", "product": "Creality PA-CF (general guidance)", "material_family": "PA-CF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "brand guide", "drying_temp_c_min": 80, "drying_temp_c_max": 90, "drying_temp_f_min": 176, "drying_temp_f_max": 194, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing (must)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-129", "brand": "Creality", "product": "Creality PAHT-CF/GF (general guidance)", "material_family": "PA-CF", "base_polymer": "PA (nylon)", "fiber_filled": true, "source_scope": "brand guide", "drying_temp_c_min": 80, "drying_temp_c_max": 100, "drying_temp_f_min": 176, "drying_temp_f_max": 212, "drying_time_h_min": 4, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing (must)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree nylon should be treated as wet out of the box, printed from a dry box or dryer, and that 50-70°C dryers are often not hot enough.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1bl0egx/ https://www.reddit.com/r/FixMyPrint/comments/1g6t3qy/ https://www.reddit.com/r/BambuLab/comments/1n9djr1/" }, { "id": "dry-130", "brand": "Creality", "product": "Creality PPA-CF (general guidance)", "material_family": "PPA-CF", "base_polymer": "PPA (polyamide)", "fiber_filled": true, "source_scope": "brand guide", "drying_temp_c_min": 100, "drying_temp_c_max": 120, "drying_temp_f_min": 212, "drying_temp_f_max": 248, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing (must)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-131", "brand": "Creality", "product": "Creality PET-CF (general guidance)", "material_family": "PET-CF", "base_polymer": "PET", "fiber_filled": true, "source_scope": "brand guide", "drying_temp_c_min": 100, "drying_temp_c_max": 120, "drying_temp_f_min": 212, "drying_temp_f_max": 248, "drying_time_h_min": 8, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Blast (forced-air) dryer column; see notes for Creality filament-dryer column", "storage_guidance": "Keep dry during printing (must)", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "Must", "manufacturer_moisture_sensitivity": "", "source_url": "https://wiki.creality.com/en/filament-drying", "source_title": "Creality Wiki: Filament Pre-Printing Guide: Drying", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-132", "brand": "Anycubic", "product": "Anycubic PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 45, "drying_temp_c_max": 50, "drying_temp_f_min": 113, "drying_temp_f_max": 122, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified ('Dry environment')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0698/1235/5357/files/ANYCUBIC_TDS_PLA_V3.0.pdf?v=1757585748", "source_title": "Anycubic PLA technical data sheet (v3.0)", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-133", "brand": "Anycubic", "product": "Anycubic PLA+", "material_family": "PLA+", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 45, "drying_temp_c_max": 50, "drying_temp_f_min": 113, "drying_temp_f_max": 122, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified ('Dry environment')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0698/1235/5357/files/ANYCUBIC_TDS_PLA__V3.0.pdf?v=1757589534", "source_title": "Anycubic PLA+ technical data sheet (v3.0)", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-134", "brand": "Anycubic", "product": "Anycubic PLA High Speed", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 45, "drying_temp_c_max": 50, "drying_temp_f_min": 113, "drying_temp_f_max": 122, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified ('Dry environment')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_PLA_HS_V3.0.pdf?v=1757558773", "source_title": "Anycubic PLA High Speed technical data sheet (v3.0)", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-135", "brand": "Anycubic", "product": "Anycubic PLA Matte", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 65, "drying_temp_f_min": 131, "drying_temp_f_max": 149, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified ('Dry environment')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_PLA_Matte_V3.0.pdf?v=1757562867", "source_title": "Anycubic PLA Matte technical data sheet (v3.0)", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-136", "brand": "Anycubic", "product": "Anycubic PLA Silk", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 65, "drying_temp_f_min": 131, "drying_temp_f_max": 149, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified ('Dry environment')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_PLA_silk_V3.0.pdf?v=1757561075", "source_title": "Anycubic PLA Silk technical data sheet (v3.0)", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" }, { "id": "dry-137", "brand": "Anycubic", "product": "Anycubic PETG", "material_family": "PETG", "base_polymer": "PETG", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 55, "drying_temp_c_max": 65, "drying_temp_f_min": 131, "drying_temp_f_max": 149, "drying_time_h_min": 6, "drying_time_h_max": 8, "drying_time_qualifier": "", "drying_method": "Not specified ('Dry environment')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0698/1235/5357/files/ANYCUBIC_TDS_PETG_V3.0.pdf?v=1757584046", "source_title": "Anycubic PETG technical data sheet (v3.0)", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "r/3Dprinting threads agree wet PETG strings and blobs badly and that drying fixes stringing that retraction tuning could not; several call it the filament most worth keeping in a dry box.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1vmyw0q/ https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/" }, { "id": "dry-138", "brand": "Anycubic", "product": "Anycubic ABS", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Not specified ('Dry environment')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_ABS_V3.0.pdf?v=1757562279", "source_title": "Anycubic ABS technical data sheet (v3.0)", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-139", "brand": "Anycubic", "product": "Anycubic ASA", "material_family": "ASA", "base_polymer": "ASA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Not specified ('Dry environment')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0245/5519/2380/files/ANYCUBIC_TDS_ASA_V3.0.pdf?v=1758535865", "source_title": "Anycubic ASA technical data sheet (v3.0)", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-140", "brand": "Anycubic", "product": "Anycubic TPU", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 8, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Not specified ('Dry environment')", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0685/7578/9245/files/ANYCUBIC_TDS_TPU_V3.0.pdf?v=1757560611", "source_title": "Anycubic TPU technical data sheet (v3.0)", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-141", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart ABS HT HF", "material_family": "ABS", "base_polymer": "ABS", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/fibreheart-abs-ht-hf-high-temp-filament-tds", "source_title": "Siraya Tech Fibreheart ABS HT HF TDS", "date_checked": "2026-10-18", "notes": "Dry if print quality declines (stringing, poor surface).", "community_moisture_note": "", "community_links": "" }, { "id": "dry-142", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart ABS-CF Core", "material_family": "ABS-CF", "base_polymer": "ABS", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 60, "drying_temp_c_max": 70, "drying_temp_f_min": 140, "drying_temp_f_max": 158, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "Original moisture-resistant packaging; dry box with desiccant for prolonged storage", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/siraya-tech-fibreheart-abs-cf-core-tds", "source_title": "Siraya Tech Fibreheart ABS-CF Core TDS", "date_checked": "2026-10-18", "notes": "Only dry if the filament is damp.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-143", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart ABS-GF", "material_family": "ABS-GF", "base_polymer": "ABS", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 65, "drying_temp_c_max": 65, "drying_temp_f_min": 149, "drying_temp_f_max": 149, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "Aluminum bag; Dry box with desiccant, humidity below 15%", "storage_rh_max_pct": 15, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/fibreheart-abs-gf-filament-tds", "source_title": "Siraya Tech Fibreheart ABS-GF TDS", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-144", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart ASA-GF", "material_family": "ASA-GF", "base_polymer": "ASA", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "Aluminum bag; Dry box with desiccant, humidity below 15%", "storage_rh_max_pct": 15, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/siraya-tech-fibreheart-asa-gf-tds", "source_title": "Siraya Tech Fibreheart ASA-GF TDS", "date_checked": "2026-10-18", "notes": "Only dry if filament shows signs of moisture.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-145", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart PET-CF", "material_family": "PET-CF", "base_polymer": "PET", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 90, "drying_temp_c_max": 90, "drying_temp_f_min": 194, "drying_temp_f_max": 194, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "Sealed aluminum foil bag with desiccant", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/siraya-tech-fibreheart-pet-cf-tds", "source_title": "Siraya Tech Fibreheart PET-CF TDS", "date_checked": "2026-10-18", "notes": "Same TDS's troubleshooting section says 100-120°C (212-248°F) for 4-6 h if moisture is absorbed. Says filament ships dried and sealed and can be used without drying.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-146", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart PET-GF", "material_family": "PET-GF", "base_polymer": "PET", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 100, "drying_temp_c_max": 120, "drying_temp_f_min": 212, "drying_temp_f_max": 248, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/fibreheart-pet-gf-tds", "source_title": "Siraya Tech Fibreheart PET-GF TDS", "date_checked": "2026-10-18", "notes": "Drying not required on first unpacking unless the vacuum pack is damp.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-147", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart PETG-CF Pro", "material_family": "PETG-CF", "base_polymer": "PETG", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "Sealed aluminum foil bag with desiccants", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/fibreheart-petg-cf-pro-filament-technical-data-tds", "source_title": "Siraya Tech Fibreheart PETG-CF Pro TDS", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-148", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart PPA", "material_family": "PPA", "base_polymer": "PPA (polyamide)", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 100, "drying_temp_f_min": 176, "drying_temp_f_max": 212, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "Dry box, relative humidity below 15%", "storage_rh_max_pct": 15, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/siraya-tech-fibreheart-ppa-filament-tds", "source_title": "Siraya Tech Fibreheart PPA TDS", "date_checked": "2026-10-18", "notes": "Only dry when moisture symptoms are present.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-149", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart PPA-CF", "material_family": "PPA-CF", "base_polymer": "PPA (polyamide)", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 100, "drying_temp_c_max": 100, "drying_temp_f_min": 212, "drying_temp_f_max": 212, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/siraya-tech-fibreheart-paht-cf-ppa-based-tds", "source_title": "Siraya Tech Fibreheart PPA-CF TDS", "date_checked": "2026-10-18", "notes": "Drying not required on first unpacking unless the vacuum pack is damp.", "community_moisture_note": "", "community_links": "" }, { "id": "dry-150", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart PPA-CF Core", "material_family": "PPA-CF", "base_polymer": "PPA (polyamide)", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 80, "drying_temp_c_max": 100, "drying_temp_f_min": 176, "drying_temp_f_max": 212, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "Dry box, relative humidity below 15%", "storage_rh_max_pct": 15, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/siraya-tech-fibreheart-ppa-cf-core-tds", "source_title": "Siraya Tech Fibreheart PPA-CF Core TDS", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "", "community_links": "" }, { "id": "dry-151", "brand": "Siraya Tech", "product": "Siraya Tech Fibreheart TPU-GF", "material_family": "TPU-GF", "base_polymer": "TPU", "fiber_filled": true, "source_scope": "product TDS", "drying_temp_c_min": 50, "drying_temp_c_max": 60, "drying_temp_f_min": 122, "drying_temp_f_max": 140, "drying_time_h_min": 6, "drying_time_h_max": 6, "drying_time_qualifier": "6+ hours", "drying_method": "Filament dryer or oven", "storage_guidance": "Sealed aluminum foil bag with desiccants", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/fibreheart-tpu-gf-filament-tds", "source_title": "Siraya Tech Fibreheart TPU-GF TDS", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-152", "brand": "Siraya Tech", "product": "Siraya Tech Flex TPU 64D", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 50, "drying_temp_c_max": 60, "drying_temp_f_min": 122, "drying_temp_f_max": 140, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "at least", "drying_method": "Filament dryer or oven", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/flex-tpu-64d-filament-tds", "source_title": "Siraya Tech Flex TPU 64D TDS", "date_checked": "2026-10-18", "notes": "Longer drying may be needed after long exposure to humid air; consider a drying print box for long prints.", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-153", "brand": "Siraya Tech", "product": "Siraya Tech Roamr TPU Air HR 85A", "material_family": "TPU", "base_polymer": "TPU", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 70, "drying_temp_c_max": 80, "drying_temp_f_min": 158, "drying_temp_f_max": 176, "drying_time_h_min": 4, "drying_time_h_max": 6, "drying_time_qualifier": "", "drying_method": "Filament dryer or oven", "storage_guidance": "Print directly from a dry box or filament dryer below 15% humidity; store in sealed aluminum foil bag", "storage_rh_max_pct": 15, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://siraya.tech/pages/roamr-tpu-air-hr-85a-tds", "source_title": "Siraya Tech Roamr TPU Air HR 85A TDS", "date_checked": "2026-10-18", "notes": "", "community_moisture_note": "Threads agree TPU is very hygroscopic: dry it even from a new bag and print straight from a dryer or heated dry box; popping or fizzing is read as moisture.", "community_links": "https://www.reddit.com/r/prusa3d/comments/1gwtgsl/ https://www.reddit.com/r/FixMyPrint/comments/1ltpp6i/" }, { "id": "dry-154", "brand": "Eryone", "product": "Eryone Standard PLA", "material_family": "PLA", "base_polymer": "PLA", "fiber_filled": false, "source_scope": "product TDS", "drying_temp_c_min": 65, "drying_temp_c_max": 75, "drying_temp_f_min": 149, "drying_temp_f_max": 167, "drying_time_h_min": 12, "drying_time_h_max": 12, "drying_time_qualifier": "", "drying_method": "Not specified", "storage_guidance": "", "storage_rh_max_pct": null, "manufacturer_dry_before_use": "", "manufacturer_moisture_sensitivity": "", "source_url": "https://cdn.shopify.com/s/files/1/0252/0412/9841/files/ERYONE-Standard_PLA-TDS.pdf?v=1750747890", "source_title": "Eryone Standard PLA technical data sheet (v1.0, 08/2024)", "date_checked": "2026-10-18", "notes": "Same TDS lists Vicat softening temperature 54°C (129°F) and glass transition 62°C (144°F), both below the recommended drying range.", "community_moisture_note": "Threads agree PLA is more forgiving in open air than PETG, TPU or nylon. Whether snapping PLA is caused by moisture or by age and stress is disputed.", "community_links": "https://www.reddit.com/r/3Dprinting/comments/1ua1zmc/ https://www.reddit.com/r/3Dprinting/comments/iq8z4v/ https://www.reddit.com/r/3Dprinting/comments/1o4bqey/ https://www.reddit.com/r/3Dprinting/comments/1g5z7id/" } ] }