SUNLU Luminous Glow In The Dark PETG on the SV08 Max
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–250 °C
- Bed70–90 °C
- Speed—
- Dry—
- Density1.27 g/cm³
Print at 220–250 °C nozzle, 70–90 °C bed.
SV08 Max maximums: nozzle 300 °C, bed 100 °C.
Sources & notes
Sovol SV08 Max with SUNLU Luminous Glow In The Dark PETG: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Sovol lists nozzle temperature ≤300 °C and hot bed temperature ≤100 °C, plus an optional chamber heating module and an enclosure kit.
Sovol's product note describes a dual-gear direct drive extruder. Nozzle alloy is not stated.
Questions
Can the Sovol SV08 Max reach the listed Luminous Glow In The Dark PETG nozzle temperature?
The listed nozzle maximum of 250 °C is within this printer's maximum of 300 °C.
Can the SV08 Max reach the listed bed temperature?
The listed bed maximum of 90 °C is within this printer's maximum of 100 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is carbon-fiber, glass-fiber, or glow-in-the-dark, so a hardened nozzle is the upgrade to check. Whether the stock nozzle is hardened is not in our current sources.