Fits
Polymaker Polylite PLA on the Q1 Pro
Q1 Pro can reach the listed nozzle and bed.
- Nozzle190–230 °C
- Bed25–60 °C
- Speed40–60 mm/s
- Dry55 °C for 6 h
- Density1.17 g/cm³
Q1 Pro maximums: nozzle 350 °C, bed not published.
Sources & notes
Qidi Q1 Pro with Polymaker Polylite PLA: The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C. This printer's maximum bed temperature is not listed. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Polymaker US PolyLite PLA product page · checked 14 October 2026 · Printer source · Filament JSON
Qidi lists print head temperature ≤350 °C, a direct extruder, and 60 °C independent chamber heating.
The stock nozzle is described as bimetal. A hardened-steel nozzle is a separate product, so the stock hardened-nozzle field is empty.
The specification table checked here does not list a maximum bed temperature. The product page says the Q1 Pro is discontinued.
Questions
Can the Qidi Q1 Pro reach the listed Polylite PLA nozzle temperature?
The listed nozzle maximum of 230 °C is within this printer's maximum of 350 °C.
Can the Q1 Pro reach the listed bed temperature?
This printer's maximum bed temperature is not listed.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.