Eryone PLA High-Speed on the Q1 Pro
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speed—
- Dry75 °C maximum
- Density1.23 g/cm³
No nozzle or bed temperature on the source. Dry at 75 °C if it's been open. No drying time on the source.
Q1 Pro maximums: nozzle 350 °C, bed not in our current sources.
Sources & notes
Qidi Q1 Pro with Eryone PLA High-Speed: Nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Filament source · Printer source · Filament JSON
Qidi lists print head temperature ≤350 °C, a direct extruder, and 60 °C independent chamber heating.
The stock nozzle is described as bimetal. A hardened-steel nozzle is a separate product, so the stock hardened-nozzle field is empty.
The specification table checked here does not list a maximum bed temperature. The product page says the Q1 Pro is discontinued.
Questions
Can the Qidi Q1 Pro reach the listed PLA High-Speed nozzle temperature?
Nozzle temperature is not in our current sources.
Can the Q1 Pro reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.