Prusa XL
Prusa XL against 45 PLA+ products: 23 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 22 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic PLA Plus | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Ender PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Plus | — | Nozzle temperature is not in our current sources. | |
| ELEGOO RAPID PLA Plus | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA+ | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA+ High-Speed | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ePLA+HS | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA+ CMYK | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland High Speed PLA+ | — | Nozzle temperature is not in our current sources. | |
| Inland PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| JAYO PLA+ | — | Nozzle temperature is not in our current sources. | |
| Overture PLA Plus | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU High Speed PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA+ 2.0 | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Dual-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Four-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Rainbow | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Tri-Color | — | Nozzle temperature is not in our current sources. | |
| 3D Fuel Dual-Color Silk PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Silk PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Standard PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Tough Pro PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 4D-Lab PLA+ Plus | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Flash PLA+ (High Speed 600mm/s) | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament Hyper PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA+ | — | Nozzle temperature is not in our current sources. | |
| Dancyn 3D Prints PLA+ High Speed | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fremover PLA+ High Speed | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GST3D Bright Pla+ Space | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ Military | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ SILK | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ Special | — | Nozzle temperature is not in our current sources. | |
| iBOSS 3D PLA+/Pro Silk Triple Red Blue Green | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Numakers PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Patron EG PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaValue PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB PLA+ | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA+ | — | Nozzle temperature is not in our current sources. | |
| YooPai Matte PLA+ | Fits | XL can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Prusa XL against 45 PLA+ products: 23 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 22 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare