ELEGOO PETG HF on the XL
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle—
- Bed—
- Speedup to 600 mm/s
- Dry60 °C(140 °F)for 8 h
- Density—
No nozzle or bed temperature on the source. Dry 8 h at 60 °C (140 °F) if it's been open. Listed speed up to 600 mm/s.
XL maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa XL with ELEGOO PETG HF: Nozzle temperature is not in our current sources.
Dataset imported 16 October 2026. Manufacturer page checked 14 October 2026.
ELEGOO PETG HF US product page · checked 16 October 2026 · Printer source · Filament JSON
The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
Questions
Can the Prusa XL reach the listed PETG HF nozzle temperature?
Nozzle temperature is not in our current sources.
Can the XL reach the listed bed temperature?
Bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.