Fits
Bambu Lab PETG HF on the XL
As an Amazon Associate we earn from qualifying purchases.
XL can reach the listed nozzle and bed.
- Nozzle230–260 °C
- Bed65–75 °C
- Speedup to 300 mm/s
- Dry65 °C for 8 h
- Density1.28 g/cm³
XL maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa XL with Bambu Lab PETG HF: The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C. The listed bed maximum of 75 °C is within this printer's maximum of 120 °C. Enclosure required is not listed for this filament. A hardened nozzle is not recorded for this filament.
Filament dataset verified date 13 October 2026. Printer source checked 14 October 2026.
Bambu Lab PETG HF technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
The comparison table lists the XL at 290 °C / 120 °C with a brass nozzle and multi-material printing by up to five toolheads.
Chamber temperature is listed as 45 °C in the Enclosure, which is treated here as an optional enclosure rather than a stock enclosed chamber.
Questions
Can the Prusa XL reach the listed PETG HF nozzle temperature?
The listed nozzle maximum of 260 °C is within this printer's maximum of 290 °C.
Can the XL reach the listed bed temperature?
The listed bed maximum of 75 °C is within this printer's maximum of 120 °C.
Is an enclosure required?
Enclosure required is not listed for this filament.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.