Prusa CORE One+
Prusa CORE One+ against 45 PLA+ products: 23 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 22 are missing an essential check. Manufacturer page checked 14 October 2026.
| Filament | Result | Why | Buy |
|---|---|---|---|
| Anycubic PLA Plus | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Creality Ender PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| ELEGOO PLA Plus | — | Nozzle temperature is not in our current sources. | |
| ELEGOO RAPID PLA Plus | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA+ | — | Nozzle temperature is not in our current sources. | |
| Eryone PLA+ High-Speed | — | Nozzle temperature is not in our current sources. | |
| eSUN 3D ePLA+HS | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| eSUN 3D PLA+ CMYK | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Inland High Speed PLA+ | — | Nozzle temperature is not in our current sources. | |
| Inland PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| JAYO PLA+ | — | Nozzle temperature is not in our current sources. | |
| Overture PLA Plus | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| SUNLU High Speed PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU PLA+ 2.0 | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Dual-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Four-Color | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Rainbow | — | Nozzle temperature is not in our current sources. | |
| SUNLU Silk PLA+ Tri-Color | — | Nozzle temperature is not in our current sources. | |
| 3D Fuel Dual-Color Silk PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Silk PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Standard PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3D Fuel Tough Pro PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 3DEA PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| 4D-Lab PLA+ Plus | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity Flash PLA+ (High Speed 600mm/s) | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Aceaddity PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament Hyper PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Alzament PLA+ | — | Nozzle temperature is not in our current sources. | |
| Dancyn 3D Prints PLA+ High Speed | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Fremover PLA+ High Speed | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| GST3D Bright Pla+ Space | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ Military | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ SILK | — | Nozzle temperature is not in our current sources. | |
| GST3D PLA+ Special | — | Nozzle temperature is not in our current sources. | |
| iBOSS 3D PLA+/Pro Silk Triple Red Blue Green | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Numakers PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Patron EG PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| PrimaValue PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. | |
| Professional LAB PLA+ | — | Nozzle temperature is not in our current sources. | |
| SmartPrint PLA+ | — | Nozzle temperature is not in our current sources. | |
| YooPai Matte PLA+ | Fits | CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it. |
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
Prusa CORE One+ against 45 PLA+ products: 23 fit, 0 cannot reach the full recommended range, 0 cannot print this material at a recommended temperature, and 22 are missing an essential check. Manufacturer page checked 14 October 2026.
Fits means the nozzle, bed, and enclosure checks all pass. Partial means the printer can print at the low end of a range but cannot reach the full recommended range, or the stock nozzle is not hardened. Outside limits means a recommended temperature starts above the printer maximum. A missing essential check is not a fit.
0 in the tray
Compare