Bambu Lab PLA Galaxy on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–230 °C
- Bed35–45 °C
- Speedup to 250 mm/s
- Dry55 °C for 8 h
- Density1.19 g/cm³
Print at 190–230 °C nozzle, 35–45 °C bed. Dry 8 h at 55 °C if it's been open. Listed speed up to 250 mm/s.
CORE One+ maximums: nozzle 290 °C, bed 120 °C.
Sources & notes
Prusa CORE One+ with Bambu Lab PLA Galaxy: Whether an enclosure is required is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PLA Galaxy technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed PLA Galaxy nozzle temperature?
The listed nozzle maximum of 230 °C is within this printer's maximum of 290 °C.
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 45 °C is within this printer's maximum of 120 °C.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.