Fits
Anycubic High-Speed PLA on the CORE One+
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle190–260 °C (374–500 °F)
- Bed55–65 °C (131–149 °F)
- Speed—
- Dry50 °C (122 °F) maximum
- Density1.19 g/cm³
Print at 190–260 °C (374–500 °F) nozzle, 55–65 °C (131–149 °F) bed. Dry at 50 °C (122 °F) if it's been open. No drying time on the source.
CORE One+ maximums: nozzle 290 °C (554 °F), bed 120 °C (248 °F).
Sources & notes
Prusa CORE One+ with Anycubic High-Speed PLA: CORE One+ can reach the listed nozzle and bed. Recorded enclosure and nozzle checks do not block it.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Anycubic High-Speed PLA technical data sheet · checked 15 October 2026 · Printer source · Filament JSON
Prusa lists a 290 °C maximum nozzle temperature, a 120 °C maximum heatbed temperature, a heated enclosed chamber, a brass CHT nozzle, and MMU3 support.
An HT hotend rated to 400 °C is described as coming soon. That figure is not the stock maximum.
Questions
Can the Prusa CORE One+ reach the listed High-Speed PLA nozzle temperature?
The listed nozzle maximum of 260 °C (500 °F) is within this printer's maximum of 290 °C (554 °F).
Can the CORE One+ reach the listed bed temperature?
The listed bed maximum of 65 °C (149 °F) is within this printer's maximum of 120 °C (248 °F).
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.