Bambu Lab PLA Tough+ on the Centauri Carbon
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle220–250 °C (428–482 °F)
- Bed35–65 °C (95–149 °F)
- Speedup to 150 mm/s
- Dry55 °C (131 °F) for 8 h
- Density1.22 g/cm³
Print at 220–250 °C (428–482 °F) nozzle, 35–65 °C (95–149 °F) bed. Dry 8 h at 55 °C (131 °F) if it's been open. Listed speed up to 150 mm/s.
Centauri Carbon maximums: nozzle 320 °C (608 °F), bed not in our current sources.
Filament page · Centauri Carbon
Sources & notes
Elegoo Centauri Carbon with Bambu Lab PLA Tough+: This printer's maximum bed temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 14 October 2026.
Bambu Lab PLA Tough+ technical data sheet · checked 14 October 2026 · Printer source · Filament JSON
Elegoo describes a 320 °C brass-hardened steel nozzle and a fully enclosed chamber.
The product page describes a heated bed and does not publish a maximum bed temperature, so that field is empty.
Questions
Can the Elegoo Centauri Carbon reach the listed PLA Tough+ nozzle temperature?
The listed nozzle maximum of 250 °C (482 °F) is within this printer's maximum of 320 °C (608 °F).
Can the Centauri Carbon reach the listed bed temperature?
This printer's maximum bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.