SUNLU PA12-CF on the K3
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle260–280 °C(500–536 °F)
- Bed50–70 °C(122–158 °F)
- Speed60–100 mm/s
- Dry80–110 °C(176–230 °F)for 12 hManufacturer drying table →
- Density1.04 g/cm³
Nozzle, Bed, Speed. Source: SUNLU product page · Last checked 20 October 2026
Drying. Source: SUNLU TDS · Last checked 18 October 2026
Compatibility
- This printer's maximum nozzle temperature is not in our current sources.
- This printer's maximum bed temperature is not in our current sources.
- Whether an enclosure is required is not in our current sources.
- This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.
Related answers
- Which nozzle (brass, hardened, 0.6mm) should I use for which filament?
- How do I print nylon, and is it worth it?
- Are carbon fiber filaments worth it, and do I need a hardened nozzle?
- Do I need to dry filament, and how?
K3 maximums: nozzle not in our current sources, bed not in our current sources.
Sources & notes
Creality K3 with SUNLU PA12-CF: This printer's maximum nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 20 October 2026.
SUNLU Nylon12+Carbon Fiber (PA12-CF) 3D Printer Filament 1KG | SUNLU Online Store · checked 20 October 2026 · Printer source · Filament JSON
Creality lists the K3 as a pre-order at $849, with estimated shipping from 2 November 2026.
The product page states a 260×260×260 mm build volume and print speeds up to 500 mm/s.
The page does not state a maximum nozzle temperature or a maximum bed temperature.
Questions
Can the Creality K3 reach the listed PA12-CF nozzle temperature?
This printer's maximum nozzle temperature is not in our current sources.
Can the K3 reach the listed bed temperature?
This printer's maximum bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
This filament is recorded as needing a hardened nozzle. Whether the stock nozzle is hardened is not in our current sources.