Bambu Lab TPU 90A on the K3
How we verify: a figure is copied from a named source, and a missing figure stays blank. Methodology.
FilamentFacts may earn a commission when you buy through links on this page. As an Amazon Associate we earn from qualifying purchases.
- Nozzle200–250 °C(392–482 °F)
- Bed30–35 °C(86–95 °F)
- Speedup to 200 mm/s
- Dry70 °C(158 °F)for 8 hManufacturer drying table →
- Density1.24 g/cm³
Speed, Drying. Source: Bambu Lab TDS · Last checked 18 October 2026
Compatibility
- This printer's maximum nozzle temperature is not in our current sources.
- This printer's maximum bed temperature is not in our current sources.
- Whether an enclosure is required is not in our current sources.
- A hardened nozzle is not recorded for this filament.
Related answers
- Can I print TPU on a Bambu/direct drive vs bowden printer?
- What is the best flexible filament, and how do I print TPU?
- Do I need to dry filament, and how?
- What filament should I use when the part has to bend?
K3 maximums: nozzle not in our current sources, bed not in our current sources.
Sources & notes
Creality K3 with Bambu Lab TPU 90A: This printer's maximum nozzle temperature is not in our current sources.
Dataset imported 13 October 2026. Manufacturer page checked 20 October 2026.
Filament source · Printer source · Filament JSON
Creality lists the K3 as a pre-order at $849, with estimated shipping from 2 November 2026.
The product page states a 260×260×260 mm build volume and print speeds up to 500 mm/s.
The page does not state a maximum nozzle temperature or a maximum bed temperature.
Questions
Can the Creality K3 reach the listed TPU 90A nozzle temperature?
This printer's maximum nozzle temperature is not in our current sources.
Can the K3 reach the listed bed temperature?
This printer's maximum bed temperature is not in our current sources.
Is an enclosure required?
Whether an enclosure is required is not in our current sources.
Is a hardened nozzle recorded?
A hardened nozzle is not recorded for this filament.